K.812 pipone 50 x 100 cm rigid filter panel in polyurethane foam,... For the manufacture, replacement and repair of filters...
K.811 pipone 1 x 2 m soft filter panel in polyurethane foam, thickness... For the manufacture, replacement and repair of filters in...
D.086 pipone Spare filter cartridge filled with active carbon for... For industrial use only - Filtration range: 25 microns.
D.085 pipone Filter in ABS with fibre cartridge filled with active... For industrial use only. Brass connection. Filtration...
B.058 pipone Alarm siren for heating systems & other industrial... Adjustable high-intensity audible signal. Supplied with...
R.798 pipone Pack of 5 filters for insertion in boiler components In stainless steel net with hem - Measures : 9 x 25 mm
C.103 pipone Dosing unit of polyphosphate . Complete with 80 g of... Scale inhibitor with chrome-plated brass body. Diameter...
R.260 pipone Gas solenoid valve, normally closed. Rapid... Approved Class A - EEC and DVGW - - Max. pressure: 200...
R.270 pipone Gas solenoid valve, normally closed. Slow opening & fast... With pressure flow regulator - 230 V - 50 Hz.
D.080 pipone Filter in ABS with brass insert with cartridge: For order code D.080.25-D.080.20 - Cartridge in washable...
D.078 pipone Self-cleaning brass filter for inlet pressure control and... This device is especially recommended for the protection...
G.133 pipone Brass fitting M.F. thermometer holder or probe holder... Sheath type: length 30 mm. - internal Ø 9 mm.
K.810 pipone 5 sq. m. (5 m. x 1 m.) roll of POLYTEX acrylic fibre... For the manufacture, replacement and repair of filters...
T.138 pipone 3-way valve ( A x B x AB) linear with shaft closing in... Can be combined with thermostatic actuators Art.T.130.70...
R.262 pipone Gas solenoid valve, normally closed. Rapid opening/closing. Approved Class A - EEC - With pressure flow regulator -...
P.002 pipone Brass fitting with nylon check-valve insertion positioned... To ensure a single flow direction to prevent possible...
T.137 pipone 2-way valve linear with shaft closing in stainless steel... Can be combined with thermostatic actuators Art. T.130.70...
D.048 pipone "Y" Shaped filter in flanged cast iron PN 16 with... For the counter flanges see art. V.153.
B.055 pipone Solenoid gas valve, normally open with manual reset. 230 V - 50 Hz. Shuts off mechanically on receiving an...
C.091 pipone Magnetic dirt separator "DEPDIRTY" in brass with magnetic... Delivery: 1,3 m3/h - Max recommended flow rate of fluid...
C.090 pipone Magnetic dirt separator “MAGDIRTY” underneath the boiler... Delivery: 1,3 m3/h - The max flow speed for fluid to...
C.100 pipone Scale inhibitor with crystal polyphosophate. Brass connection - Install in cold water system - Max....
A.060 pipone Anti-syphon solenoid valve for gasoil or heavyoils. Connections: 3/8" F.F. Usually installed in feeder pipe...
V.058 pipone N.C. electrothermic actuator for opening and closing of... Can be operated bv a room thermostat to control room...
B.056 pipone Solenoid valve connector according to DIN 43650 standard. For solenoid valves Art. H.500 or coils Art. H.501
B.057 pipone Gas solenoid valve normally open manual reset Supply 9-12 Vdc – Max. pressure: 1.000 mbar. Receiving an...
B.054 pipone Solenoid gas valve, normally closed with manual reset.... 230 V - 50 Hz. Shuts off mechanically in case of power...