Antares Chimney articles

Paneel voor rookkanaal met pyrometerhouder met aluminium deklaag. Model ´PT´.

Brass flange for smoke pipeline with union for insertion with bolt air tight for smoke thermometer with bulb diam: 9 (Art E.165).

E.165

Rookpyrometer voor rooktemp. Ø 60 mm. Schaal 0° - 500°C.

F.415

400ml can of spray flame detergent, suitable for the cleaning of boiler exchangers.

F.425

5kg tank of termonet detergent for boiler combustion chambers.

Concentrated product to easily remove soot residue and incombustible deposits from the heat exchange surfaces of boilers.

F.426

ack of 200 gr of powdered mix rods to disgregate soot and incombustible deposits.

Suitable for all typs of combustible liquid (gas oil, diesel oil, kerosene, fuel) and solid fuel boilers(wood, coal, pellets) Removes corrosive deposits and oxides therefore improves the combustion and efficiency of the boiler, by working on the most inaccessible points of the combustion chamber during the working period.

F.429

5kg tank of termonet detergent for boiler combustion chambers.

Concentrated product to easily remove soot residue and incombustible deposits from the heat exchange surfaces of boilers.

F.626

Pack of 5 curved brushes 36 X 10mm for the internal cleaning of wall boilers.

F.627

Pack of 2 brushes mm 90*170*15 thickness, for the cleaning of the heat exchanger or wall boilers.

F.628

Pack of 2 rolls of embossed fabric paper for cleaning.

Charateristics of every roll: height 260mm - length 250 mt wieght kg 3 * 2-715 tears 350 mm each.

F.630

Pack of 5 tube brushes in PPL diam 60mm Length 420mm For the internal cleaning of wall boilers.

F.635

Pack of 5 nylon tube brushes 710 mm long.

F.637

Pack of 2 nylon tube brushes diam 70 for the cleaning of the heat exchanger or gas wall boilers.

F.638

Tube brush with stainless steel rod threaded 12 ma for medium size boilers

F.639

Round nylon brush with stud in steel M12 compatible with all extensions.

F.640

Zinc plated rods or extensions for tube brushes F.638 with thread diam 12ma.

F.641

Temperatuurvoelers voor elektronische printplaten. Temperatuurschaal: van -30°C tot +125°C.

F.643

Round nylon brush with flexible stud in steel M12 compatible with all extensions

F.730

Verpakking van 10 afsluitdoppen voor rookkanalen en gasrookvoeler met silicone afdichtring en vijzen.

F.733

Professional vacume cleaner TECO W20S with two stage motor 1200W for the cleaning of boilers, high power with 20lt stainless steel drum.. Very limited wieght and size, also has blowing function 230vac.

Complete with the following accessories: Flexible hose2,5m Stainless steel pipe Tube brush holder Flat nozzle.

F.734

Portable vacume cleaner TECO SET suitable in particular for the cleaning of wall boilers in appartments 230vac. Complete with flexible hose of two meters 2 suction heads 10 dust bag filters.1200W

Complete with following accesories: flexible hose 2.5 m, stainless steel pope 1m, brush holdr, flat nozzle.

F.735

Pack of 10 bags filters for vacuum cleaners Art. F.734.15

N.400

Straight smoke shaft in black varnished stainless steel single wall thickness 0.44 mm, with socket-fit, supplied with siliconic seal also for positive pressure use P1.

N.405

Elbow at 45° degrees M/F single wall for smoke shaft in black varnished stainless steel single wall thickness 0.4 mm, supplied with siliconic seal also for positive pressure.

N.406

Elbow at 90° degrees M/F single wall for smoke shaft in black varnished stainless steel single wall thickness 0.4 mm, supplied with siliconic seal also for positive pressure.

N.413

Tee connection F/M/M between smoke pipeline and pipeline for smoke with made side-fit at 90°, in black varnished stainless steel single wall thickness 0.4 mm, supplied with siliconic seal also for positive pressure.

N.415

Female-female for smoke shaft, to restore male-female socketing connection, after having cut to measure a straight smoke shaft, in black varnished stainless steel single wall thickness 0.4 mm, supplied with siliconic seal also for positive pressure.

N.418

Large wall covering rose for smoke shaft, black varnished stainless steel.

N.421

Tap with exhaust discharge in black varnish stainless steel, with siliconic washer.

N.425

Exhaust end-unit with stainless steel protection net. To be used in case of horizontal discharge.

N.430

Vertical exhaust end-unit in stainless steel.

N.435

´Chinese´ chimney pot with F. conn., stainless steel. Black varnish.

N.440

Straight smoke shaft single wall in rigid polyproplylene PP translucent white self-extinguishing with socket fit M.F. fitted and supplied with EPDM gasket

N.442

45° M.F. elbow for chimney vents in polyproplyene with gasket in EPDM ready assembled

N.443

87° M.F. elbow for chimney vents in polyproplyene with gasket in EPDM ready assembled.

N.445

Inspectionable unit M/F for chimney vents in polyproplyene with gasket in EPDM ready assembled.

N.448

Condensation drain tap F. x Ø 32 mm for chimney vents in polyproplyene with gasket in EPDM ready assembled.

N.450

Largening unit M.F. for chimney vents in polyproplyene with gasket in EPDM ready assembled

N.451

Reducing unit M.F for chimney vents in polyproplyene with gasket in EPDM ready assembled

N.453

Wall covering dome in white rubber for chimney vents for relevant series

N.455

Coil of flexible chimney shaft ´Condensing Pipe´ in white polyproplyene PP for condensing boilers, cooker hoods access and extraction air shafts with temperatures not above 120°C

Reference rules: EN14471 - pressure level: P1 - Resitance to condendensation: W - Resistance to corrosion: 1/2 - sealing gasket: epdm black. Each meter includes n.1 male and n. 1 female (minimum space)Blocking embedded system anti disconnecting. (60-80)

N.458