Antares Distributor manifolds

- Low temperature module applicable to manifolds, even in closets,for underfloor systems prepared for regulating modulating temperature. Complete of servomotor applied to mixing valve and prepared for connection to climatic electronic control unit (Art T.101 on page..) or other make. The module is composed of: hydraulic separator of 2 m3/h, mixing valve, adjustable high efficiency pump Alfamax RS 25/60 with 6mt delivery, reset safety thermostat for stopping the pump in case of abnomalities, one

Connection 1´ With connections for high temperature ¾´

G.134

3-Delige excentriekkoppeling om de aansluiting met verdeelleidingen te vergemakkelijken. (Excentriciteit 16 mm).

G.042

Aanzuigklep voor ´Multiflex´ tank met ophaalhendel en voetventiel. In messing met 1´ M. koppeling.

Suitable for manifold series:G.010, G.015, G.016, G.020, G.022, G.024, G.025, G.029 Length sufficient for 12 bypasses can be cut to measure for inferior quantities

E.700

Adajacent manifold “FLUIDHUB” for thermal installations in varnished steel with axis on deviations of 125mm , suitable for relay groups DN 25 and DN 32. Equipped with connection nut (M8) for fixing brackets. Complete of isolating shell with axis 125mm.

Main connections diam : 11/2´M with flat seat axis of 125 mm. Connections on deviations diam: 11/2´F swivel or 1´F swivel.

G.132

Adjustable differential overpressure by-pass kit for to and return manifolds over-lapped by 1´, with hole distance from 200 to 300mm . Connections: 1´M x 1´M

G.131

Adjustable intermediate by-pass kit between mixing group from in and out flow manifolds

With wheelbase from 170 to 220mm, cinnections from 1´M x 1´F

E.607

Basismodule bestaande uit thermostatische mengventielen voor temperatuurregulering (Art. T.133.10) geïnstalleerd op een modulair element met parallelle aanzuig- & retourkoppelingen 1 1/2´ M. boilerkant onderaan en 1 1/2´ V. wartelmoer bovenaan aan de systeemkant. Tussenafstand koppelingen: 125 mm - Hoogte: 110 mm. Compleet met een vaste aanpasbare by-pass voor boilercircuit bruikbaar wanneer de controlegroep is geïnstalleerd aan de boilerwand of op de boilercirculator. Het systeem voorkomt het

Aanpassingsschaal: 20°C - 70°C.

G.864

Brass elbow fitting with M thread end and compression end for multilayer pipe.

G.135

Brass fitting with thermometer pocket with F swivel nut.

Conn. M. thread with washer press nut O ring and F swivel nut with flat seat. Complete with washer.

G.066

Compact fitted thermal group, for modulating circulating and regulating the flow temperature in underfloor heating systems, equipped with outlets for feeding heating elements in high temperature (radiators/towel warmers), composed of: 1 Hydraulic unit manifold/separator 2 Unit with three way valve, with motor 230V – 3points 3 Electronic electro-circulator 60-25 (m.c.a. 6.0 with 1m3/h). 4 Intercepting ball valves flow and return system diam3/4”. 5 Thermometers for temperature control of flow and

G.211

Compact mixing group with fixed point thermostatic temperature control, applicable to manifolds for radiating systems, adduction connections ¾´F

Composed of: Circulation pump in energy class “A”delivery 6mt Thermostatic valve with setting 20°- 50°C Balancing lockshield One way flow valve Temperature thermometer Safety thermostat with reset for stopping the circulator in case of accidental exceeding of set temperature (in respect of European legis. 2008/125/CE) Neccessary 3 piece preset fittings for connecting manifolds N.B. manifolds are not included in the price.

G.212

Compact mixing group with fixed point thermostatic temperature control, applicable to manifolds for radiating systems, complete of hydraulic compensator, this allows self management of the system. Guarantee of an excellent delivery and flow. Adduction connections 1´M

Composed of: Steel hydraulic compensator on primary circuit of boiler with flow from 3mc/h with thickness 75mm, apt to be lodged together with the manifolds in fitted cabinets – art G.173 and G.174. Circulation pump energy class “A” 6mt Thermostatic valve setting 20° - 50°C Balancing lockshield One way flow valve 2 temperature themometers Safety thermostat with reset for stopping the circulator in case of accidental exceeding of set temperature (in respect of European legis. 2008/125/CE) Neccessary 3 piece preset fittings for connecting manifolds N.B. manifolds are not included in the price.

Om prijzen te bekijken log in

Distributor manifolds

CONTACTEN

Italia

ANTARES for Water & Fire Srl

OVER ONS