Antares Flex hoses

Suction valve for “Multiflex” tank with pull lever and foot valve. In brass with 1 ”M connection

Aanzuig- en retourkoppelingen: diameter 8, 10, 13 of 3/8´. Lengte aanzuigslang: 2.200 mm. Met diameter 6 koppeling, klaar voor aanhechting van niveaumeter A.040.00.

E.363

Suction valve for “Multiflex” tank with pull lever and foot valve. In brass with 1 ”M connection

Aanzuig- en retourkoppelingen: diameter 8, 10, 13 of 3/8´. Lengte aanzuigslang: 2.200 mm. Met diameter 6 koppeling, klaar voor aanhechting van niveaumeter A.040.00.

E.360

Suction valve for “Multiflex” tank with pull lever and foot valve. In brass with 1 ”M connection

Aanzuig- en retourkoppelingen: diameter 8, 10, 13 of 3/8´. Lengte aanzuigslang: 2.200 mm. Met diameter 6 koppeling, klaar voor aanhechting van niveaumeter A.040.00.

E.350

Suction valve for “Multiflex” tank with pull lever and foot valve. In brass with 1 ”M connection

Aanzuig- en retourkoppelingen: diameter 8, 10, 13 of 3/8´. Lengte aanzuigslang: 2.200 mm. Met diameter 6 koppeling, klaar voor aanhechting van niveaumeter A.040.00.

E.348

Pack of open rings (2) with washers (3) for fastening fitting joints assemblies with corrugated pipe CSST.

Thickness washers 1.8 mmm. Note: when buying bear in mind the use, european legislation foresees the obligation to use gas washers in NBR EN682.

F.394

Suction valve for “Multiflex” tank with pull lever and foot valve. In brass with 1 ”M connection

Aanzuig- en retourkoppelingen: diameter 8, 10, 13 of 3/8´. Lengte aanzuigslang: 2.200 mm. Met diameter 6 koppeling, klaar voor aanhechting van niveaumeter A.040.00.

F.392

Suction valve for “Multiflex” tank with pull lever and foot valve. In brass with 1 ”M connection

Aanzuig- en retourkoppelingen: diameter 8, 10, 13 of 3/8´. Lengte aanzuigslang: 2.200 mm. Met diameter 6 koppeling, klaar voor aanhechting van niveaumeter A.040.00.

F.390

Suction valve for “Multiflex” tank with pull lever and foot valve. In brass with 1 ”M connection

Aanzuig- en retourkoppelingen: diameter 8, 10, 13 of 3/8´. Lengte aanzuigslang: 2.200 mm. Met diameter 6 koppeling, klaar voor aanhechting van niveaumeter A.040.00.

B.124

Veiligheidsslang voor alle types gas met interne en externe staalbedekking met verbindingsplug DIN3383 voor de aansluiting op alle veiligheidskleppen of doppen.

Safety tube for all types of gas. Internal and external in steel with connecting cap DIN 3383 for connection to all types of safety valves or taps. Connection 1/2´ F.

E.338

Kit of flexible hoses in stainless steel for connection to boilers.

made of: 2 Flex which can be shortened 3/4´ F. - 3/4´ F (E.332) for forward and return 2 Flex which can be shortened 1/2´ F. - 1/2´ F. (E.332) for hot/cold sanitary water 1 Flex extenible for gas 3/4´ M. - 3/4´ F. (E.333) with yellow sheath 5 washer 3/4´ 4 washers 1/2´

E.334

Anti vibration dilation joint in stainless steel for gas distribution piping and other uses. MM thread.

E.333

Uitrekbare flexibele slang in roestvrijstaal voor gas voor huisgebruik comform volgens de UNI CIG 9891 reglementering met externe bekleding in geel polyethyleen.

B.121

Metallic flexible hose for connection to domestic gas appliances ´EUCOOKERHOSE´. In accordance with the new european regulation EN 14800.

Made up of steel spirals with metallic net sheath and another protective plast sheath DN12. Complete with washers for gas.

E.330

Uitrekbare flexibele slang volledig in roestvrijstaal.

Maximum druk: 10 bar - Werktemperatuur: -20°C tot +110°C.

E.341

Coil of corrugated flexible pipe CSST (Corrugated stainless steel tubing) in stainless steel AISI 316 ´INOFLEX´ parallel spiral coils with protective yellow sheath (MDPE) suitable for gas systems, conforming with leg. EN15266. Can connect with the fittings below.

Thickness 0.3 mm Max temp. 100°C max pressure 0.5 bar.

E.346

Pack of brass nuts for the washers with corrugated tube CSST.

With the half ring and the fittings with male thread with flat seat allows you to form a joint.

G.167

Straight brass fitting between the copper tube and the corrugated steel tube.

F.664

Amalgamating protective tape for the parts of the pipe where the external sheath has been removed in order to allow joint . Regulation forsees that these parts must be covered with yellow protective tape

Width 25mm Thickness 0,5mm Length 5mt.

F.305

Oval collars for twin pipes with sheath for solar systems or other steel applications. In galvanized steel.

E.349

Suction valve for “Multiflex” tank with pull lever and foot valve. In brass with 1 ”M connection

Aanzuig- en retourkoppelingen: diameter 8, 10, 13 of 3/8´. Lengte aanzuigslang: 2.200 mm. Met diameter 6 koppeling, klaar voor aanhechting van niveaumeter A.040.00.

E.345

Double coil (to and from) of flexible tube ´INOFLEX CSST´ for solar systems in stainless steel AISI 304 corrugated parallel spires thickness 0.3 mm in defined lenght with isolating expanding sheath EPDM 8 mm and coated with protective film iron UV rays and from ware and tare with multifase cable (for temp. probes).

Max temp. 40 + 150°C pressure PN 15 bar.

E.340

Rol flexibele slang in getemperd roestvrijstaal, parallel omvlochten. Kan op maat gesneden worden E.346 - E.348 - G.147 - G.149 - G.167 - G.158. Werktemperatuur: -20°C tot +550°C.

Thickness 0.3 mm. Max temp 550°C max pressure 15 bar.

E.342

Coil of flexible tube ´INOFLEX CSST´ for solar systems. In stainless steel AISI 304 corrugated parallel spires thickness 0,3mm in defined length with isolating expanding sheath EPDM 13mm and coated with protective film against UV rays and from ware and tare with or without multiphase cable for temp. probes.

Max temp: - 40 + 150°C - presure PN 15bar.

F.665

Polyvinilic black adhesive tape suitable for small repaires on isolating sheath Of pipes with thermal insulation (Art E.342 and E.343) during installation of solar systems.

Width : 19 mm Thicknes 0,18 mm Length 20 mt

M.120

Buigbare buis in gechromeerde koper. Diameter 10 mm met gekraagd uiteinde en moer. Het tegenovergestelde uiteinde kan verbonden worden met Art. M.151, M.152, M.160, M.161, M.165.02.

M.150

5mt coil of bendable chrome plated copper tube, cut to measure for the connection of sanitary devices.

M.159

Verchroomde kniekoppeling voor onderwastafel. Telesco- pisch verlengstuk met glijrozet. Verlenging van 55 mm tot 105 mm. Koppeling 1/2´M. x 10.

M.152

Verchroomde koppeling met glijschaft voor zeshoekig rozet met moer & pakkingsring Ø 10 mm.

M.160

Hellende koppeling in verchroomde messing voor onderwastafel. Koppeling Ø 10 mm met rozet in roestvrijstaal.

M.161

Haakse ventielkoppeling in verchroomde messing voor onderwastafel met rozet, moer & pakkingsring.

M.170

Verpakking van 2 koppelbogen voor onderwastafel of warmwaterketel. Lengte 150 x 250 mm met glijrozet in roestvrijstaal. Koppeling 1/2´ M. x 1/2´ V.

M.151

Verchroomde koppeling met moer & pakkingsring.

M.165

Verchroomd haakse ventielkoppeling voor onderwastafel met geïntegreerde filter (toegankelijk voor inspectie), compleet met rozet 1/2´M. x 10.

M.166

Chrome plated brass angle tap for under sink combined with washing machine fitting and anti reflux screw. Complete with roses.

Connection 1/2´ M. x 10 x 3/4´ M.

F.668

Adhesive tape in foamed reinforced rubber with black close cells and throaway protection film.

Suitable for the insulation of hot and cold pipes, in particula for the cooling production and distribution systems and for special parts that cannot be insulated with tubular pipe insulators. Thickness 3mm.

F.620

Pipe cutter for diameters 3 to 35 mm.

F.745

Flaring instrument for corrugated pipe for templates F.746.12 - F.746.15 and F.746.20 for diameters from 1/2´- 3/4´ e 1´.

This device facilitates the forming of flaring without having to fall back on N°3.

F.746

Templates for inserting inside the flaring instrument F.745.10.

F.748

Suitcase kit for corrugated pipe CSST complete of: Case in ABS - Pipe-cutter F.620.35 - Flaring instrument F.745.10 - Templates for flaring instrument F.746.12 F.746.15 and F.746.20 - n20 nuts 1/2´ - n20 open rings diam.12 with n10 washers Fasit and n10 washer in NBR - n12 nuts 1´ - n12 open rings diam.20 with n6 washers in Fasit and 6 washers in NBR.

Complete with: ABS case - Pipe cutter Art. F.620.28 - Flaring unit Art. F. 745.10, templates for flaring machine Art. F. 746.12 and F. 746.15 and F.746.20 - n ° 20 1/2 ´nuts, n ° 20 open rings Ø 12 with n ° 10 Fasit seals and n ° 10 NBR seals, n ° 20 3/4 ´nuts - n ° 20 open rings Ø 15, with n ° 10 Fasit seals and n ° 10 NBR seals , n ° 12 1 ´nuts, n ° 12 open rings Ø 20 with n ° 6 gaskets in Fasit and n. ° 6 gaskets in NBR.

M.500

Flexible hose in plastic PVC extendible and compressible for the connection of WC seats.

Inlet connection diam 72/100 - outlet conn 90,100,110 Minimum length mm290 extendible to maximum 590. Structure to avoid deflection with rienforced spiral in PVC.

M.130

Flexible hose in monolithic plastic that can be extended or compressed according to the form of drain taps of sinks, wash basins and bidets.

Minimum length mm 300 extendible to a maximun of 680 mm.

M.119

Flexibele afvoerbuis in kunststof, Ø 32 mm.

Dit is een verbazend praktische flexibele slang dat elk soort afvoerprobleem kan oplossen in verband met wastafels, bidets en afvoersifons. Kan eveneens gebruikt worden als vervanging van de traditionele afvoersifon. Kan op maat gesneden worden, compleet met afsluitadapters. V. wartelmoer 1 1/4´ en afvoerbuis Ø 32 mm.

M.114