Made with stainless steel plates AISI 316 and gaskets in NBR. Connections with barrels nipples in stainless steel 2´ M. Also suitable for swimming pools (chlorinated water) and for the passage of water with glycol antifreeze. Allows the production of hot water in the measures specified below based on the following temperatures: Primary circuit 70°C min, Secondary circuit with inlets of 15°C and outlets of 50°C (Delta-t 35°C). Technical sheet may be downloaded from our website in pdf file - In order to have a greater potential it is possible to combine them with parallel connections. surface thermal exchange for every plate m2= 0.063(per plate) max working pressure 10 bar – volume contained for every channel 0.24(per plate).

Made with stainless steel plates AISI 316 and gaskets in NBR. Connections with barrels nipples in stainless steel 1 1/4´ M. Also suitable for swimming pools (chlorinated water) and for the passage of water with glycol antifreeze. Allows the production of hot water in the measures specified below based on the following temperatures: Primary circuit 70°C min, Secondary circuit with inlets of 15°C and outlets of 50°C (Delta-t 35°C). Technical sheet may be downloaded from our website in pdf file - In order to have a greater potential it is possible to combine them with parallel connections. surface thermal exchange for every plate m2= 0.034(per plate) max working pressure 10 bar – volume contained for every channel 0.19(per plate).

Equipped with stainless steel heat exchanger AISI 304 (Art S.009) 2 pumps in energy class ´A´ (Art P.064.6) 2 ball valves (Art E.465), 2 ball valves with thermometer (Art E.478) and 2 check valves (Art A.010.10) Max working temp. 99°C Max working pressure 15 bar.

Prepared for direct connection with anticondensation biomass heat generators (Art E.627 on page..) and also for the control units for the lowering or mixing of temperature for radiant systems. (Art E.623 and E.625 on page..) It is composed of steel plate heat exchanger in the power listed, neccessary preassembled connection fittings and isolating shell. prepared for the connection of various accessories in corrispondence with the four ´T´ fittings - Distance between holes: 125mm.

Composed of the following components - Steel plate heat exchanger XXKWAT - Circulator 6mt in energy class ´A´Expansion vessle inserted or external equipment; - 3 bar safety valveCapillary manometer; -circuit feeding tap; - 4 intercepting ball valves; Dirt separator optional as accessory; automatic deareator; 4 steel flex 3/4´ extendible for connection.