Suitable for use on ovens.chimmneys stoves and boilers.

Adheres to a vast number of supports even damp concrete plaster metal wood. 500gr cartridge

Zuurstofonttrekker om buisverbindingsstukken in lood, messing, koper, ijzer en zink te solderen. Vergemakkelijkt het solderen. Verpakking van 10 stangen.

Deoxider to solder pipe joints in lead brass copper iron zinc. Makes soldering easier. Pack 10 rods.

Eliminates heat and gas stress caused by coupling of different metals

Afdichtmiddel voor verbindingsstukken, afdichtringen etc. Gebruikt met hennep.

Non adhesive for soldering, lubrification and protection against corrosion of mechanical parts in damp areas. Guarantees longer duration of cutting tools, rubber parts and joints.

Concentrated product to easily remove soot residue and incombustible deposits from the heat exchange surfaces of boilers.

Concentrated product to easily remove soot residue and incombustible deposits from the heat exchange surfaces of boilers.

Conform volgens DIN-DVGW Standaard 30661. Losschroefresistentie: Laag. Vormt een elastische afdichting bestand tegen druk, trillingen, warmte (werktemp. -50°C tot +150°C). Gebruikt zonder hennep. Losschroeven mogelijk na een bepaalde tijdsduur.

Suitable for all typs of combustible liquid (gas oil, diesel oil, kerosene, fuel) and solid fuel boilers(wood, coal, pellets) Removes corrosive deposits and oxides therefore improves the combustion and efficiency of the boiler, by working on the most inaccessible points of the combustion chamber during the working period.

AAdapting plate for embedded box

Suitable for the insulation of hot and cold pipes, in particula for the cooling production and distribution systems and for special parts that cannot be insulated with tubular pipe insulators. Thickness 3mm.

Width 25mm Thickness 0,5mm Length 5mt.

Losschroefresistentie: Hoog - Gebruikt zonder hennep.

Losschroefresistentie: Medium. Gebruikt zonder hennep- Druppelteller met ekonomisch doseerspuitstuk.

Output voltage: 18kV - Power consumption: 2.5 VA. With 53 cm power cable with caiman terminal, with 30 cm high voltage cable with cylindrical female terminal Ø 4 mm (in silicone) with protection against radio interference.

Capacitive discharge igniter suitable for premixed gas burners for condensing boilers. 230 Vac power supply with 3-way Stelvio connector. Output: 15kV with Fast-On 2.8 x 0.5

(Class VL 94 VO). For the insertion of natural gas and LPG pipes in compliance with the provisions of the UNI CIG 7129 and 7131 regulations.

Werkschaal: DC 200mV / 1,000V - AC 200V / 750V - DC 2000mA / 200mA - Weerstand 200W / 2000 KW - Temperatuur: -40°C - 1000C° - Diode test - Hoorbaar signaal - Compleet met beschermzekeringen

Suitable for embedded thermostats.

Flow rate 2lt/h - Dimensions 238 x 69 - Connections: diam 20,

Used especially for soldering of copper fittings for domestic and industrial water systems of piping for heating , gutters, radio and TV appliances.

Capacitive discharge igniter for atmospheric gas burners. 230 Vac power supply with Fast-On 6.3 x 0.8 Output: 20kV with 2.8 x 0.5 Fast-On

Length feeding cable 500mm – Primary ; 230V Exit : 2 x 6,5 KV - 35 mA Fitting A.T. type “A” Intermittence 3 min. su 33%

Enables the descaling of primary and secondary circuits. Built with antiacid material and complete with o-ring

Charateristics of every roll: height 260mm - length 250 mt wieght kg 3 * 2-715 tears 350 mm each.

For strong soldering at high temp. of copper pipe for gas and water to be used with alloy for strong soldering with silver on copper, copper alloy, steel.

Dimensions: 240 x 190 x 87 - Suitable for adapting electronic device Art. T.101.07.

Es können bis zu 4 Stellenantriebe auf einem Ausgang verbunden werden. Stromspeisung: 230 VAC - Ausgang Pumpe: 230 VAC 4A.

Width : 19 mm Thicknes 0,18 mm Length 20 mt

Bestand tegen de meeste chemische substanties. Werktemperatuur: -200°C tot +200°C.

Max temp. 250°C.

Max temp. 180°C

Max temp. 180°C.

In low density polythene and waterproof.

With stainless steel body, brass impeller and stainless steel shaft. Max. suction 9 m. Conn. 1´F. x 1´F. Power supply 230V 50 Hz. Single phase with incorporated heat motor protection.

Suitable for thermal isolation of cracks and form barriers against heat or noise. 750ml

Aanzuig- en retourkoppelingen: diameter 8, 10, 13 of 3/8´. Lengte aanzuigslang: 2.200 mm. Met diameter 6 koppeling, klaar voor aanhechting van niveaumeter A.040.00.

Aanzuig- en retourkoppelingen: diameter 8, 10, 13 of 3/8´. Lengte aanzuigslang: 2.200 mm. Met diameter 6 koppeling, klaar voor aanhechting van niveaumeter A.040.00.

Sensor in steel tube 6x50mm- Grey silicon cable Length . 1000mm – pre insulated tips. Temperature range -50/+180°C

Type NTC 25° = 10K - Diameter 7 mm. Control: -9,5°C / 99,5°C

ACETIC TYPE highly resilient activated with fungicide. Working temp. 50-200°C 280gr. NEUTRAL TYPE does not oxidate soft metalls Suitable for plastic materials : shower box in policarbonate, resin tubs, copper gutters etc. Working temp; 50-+150°C 280gr. HIGH TEMP TYPE highly resilient acetic , red in colour resistant to high temp. Used for external on chimmnys, flues, industrial drains, threaded couplings, ovens, heatexchangers etc. Working temp. 50-+300°C 280gr. REFRACTORY TYPE single component sealant containing doses of pyrogenic that hardens with evaporation. Suitable where there is a bare flame. Working temp; 1200°C 280gr.

Dit apparaat laat de controle van het prestatievermogen en de gesteldheid toe van alle soorten thermokoppels voor boilers en gaskokers. Werkt zonder externe stroomtoevoer en is geschikt voor onderschepte thermokoppels. Compleet met ingefreesde adaptor voor verschillende draden en krokodillenklemmen voor het testen van alle soorten thermokoppels.