Antares Plate heat exchangers

steel plate heat exchanger with fixing wings compatible for JUNKERS - BOSCH - ELM LEBLANC boilers. Diam. Mod. 190 x 75 Axis exit holes 154mm

S.060

Steel plate heatexchanger for VAILLANT boilers with fixing wings on plate with axis of 205mm - length max 220mm and rapid insert axis 154.Complete with washers.

S.094

Suction valve for “Multiflex” tank with pull lever and foot valve. In brass with 1 ”M connection

Aanzuig- en retourkoppelingen: diameter 8, 10, 13 of 3/8´. Lengte aanzuigslang: 2.200 mm. Met diameter 6 koppeling, klaar voor aanhechting van niveaumeter A.040.00.

E.629

Thermal exchange module for hydraulic circuits

Prepared for direct connection with anticondensation biomass heat generators (Art E.627 on page..) and also for the control units for the lowering or mixing of temperature for radiant systems. (Art E.623 and E.625 on page..) It is composed of steel plate heat exchanger in the power listed, neccessary preassembled connection fittings and isolating shell. prepared for the connection of various accessories in corrispondence with the four ´T´ fittings - Distance between holes: 125mm.

S.047

Thermal pre-assembled exchange group for the separation of the open circuit from the closed for heating systems through back boilers, fireplaces, biological fuel, compressed wood chippings.

Equipped with stainless steel heat exchanger AISI 304 (Art S.009) 2 pumps in energy class ´A´ (Art P.064.6) 2 ball valves (Art E.465), 2 ball valves with thermometer (Art E.478) and 2 check valves (Art A.010.10) Max working temp. 99°C Max working pressure 15 bar.

S.009

Uitwisselaar ALFAMAX met gesoldeerde laten in inox roestvrijstaal Aansluitingen 1´M.

Surface exchange for every plate 0.027m3 x number of plates - 2 - Amount of water contained per channel: 0.05lt x number of plates -1 - max pressure 30bar.

S.005

Uitwisselaar ALFAMAX XS 208 x 75 met gesoldeerde platen in Inox roestvrijstaal. Wordt gebruikt als vervangonderdeel voor wandboilers. Compatibel met ALFALAVAL CB14, SWEP en ZILMET.

Compatible with boilers: 1: ARGO, 2: BAXI/LUNA, 4: DEMIR DOKUM, 5: SIMAT, 6: ECOFLAM, 7: IDEAL CLIMA, 8: RHOSS, 9: FONDITAL, 10: IDROGAS OTMA, 11: OCEAN(LUNA), 12: CHAFFOTEAUX, 13: DEVILLE 14: MTS/ARISTON 15:HANSA-INOX-TANTUM, 16: BAYMAK, M: ALL COMPATIBLE MAKES CAN BE IDENTIFIED BY DIMENSIONS AND NUMBER OF PLATES.

S.012

Uitwisselaar met gesoldeerde platen in inox roestvrijstaal compatibel met ´BERETTA -RIELLO´ boilers. Model met draadkoppelingen: primair c. 3/4´ M. x 1/2´ V; secondair c. 1/2´ M. x 3/8´ V-Model 190 x 75 - axis 154 x 40

Geschikt voor modellen: MINUTE - IDRA EXCL - IDRA EXCL TURBO - IDRA EXCL ES - METEO - METEO TURBO. Lengte 190 mm

S.013

Uitwisselaar met gesoldeerde platen in inox roestvrijstaal compatibel met ´BERETTA -RIELLO´ boilers. Model met O-ring koppelin.

Geschikt voor modellen: IDRA GREEN - IDRA EXCL. - METEO II. Dimensions 190 x 75.

S.003

Uitwisselaars ALFAMAX met gesoldeerde Inoxplaten . Compatibel met ALFALAVAL BP10, SWEP E5N en ZILMET ZB190

Compatible with: ARCA = 1; BALTUR = 2; CHAFFOTEAUX/ Caldyra = 3; RHOSS = 4; SANT´ANDREA = 5; SAVIO = 6; BIASI-SAVIO = 7; FERROLI = 8; SIME = 9; IMMERGAS/ ICHS = 10; IMMERGAS = 11; RADIANT = 12; VIESSMANN = 13; JUNKERS = 14; OTHER BRANDS = 15; ARISTON = 16 G= varies from lower to upper stud.

S.002

Uitwisselaars ALFAMAX SW190 x 75 met gesoldeerde Inoxplaten . Compatibel met ALFALAVAL BP10, SWEP E5N en ZILMET ZB190

Compatible with boilers: FERROLI = 1 CHAFFOTEAUX = 2 FONTECAL = 3 RIELLO/ BENEFIT = 4 OTHER BRANDS= 5 PENSOTTI = 6 BERETTA = 7

S.010

Wärmetauscher ALFAMAX mit fest gelöteten Edelstahlplatten mit reichlich Gewindeanschlüsse 1 1/4 AG – .

surface exchange for every plate 0.063m3 x number of plates - 2 - Amount of water contained per channel: 0.15lt x number of plates - 1 - max pressure 30bar - Especially indicated for combining open circuits (solid fuel boilers) with closed circuits (mod. In steel aisi 304)and for heating pools (mod. In steel aisi 316).

S.018

`` ALFAMAX ´´ type SW 190 x 75 instantaneous exchanger with brazed stainless steel plates with crossed flows and threaded connections. Distance between centers of prison connections 154 mm. As a replacement for boilers.

Om prijzen te bekijken log in

Plate heat exchangers

CONTACTEN

Italia

ANTARES for Water & Fire Srl

OVER ONS