Art. nummer G.840.00

Art. nummer G.840.00

Pipe dispenser.

Art. nummer
G.840.00
Beschikbaarheidstype
Artikel uit voorraad
articolo gestito per essere disponibile e spedito il giorno stesso del ricevimento dell'ordine
Om prijzen te bekijken log in

Gerelateerde artikelen

F.005
F.005
Pack of 100 plastic fixing clamps (polyamides 6.6).

G.700
G.700
Coil buis-in-plyethyleenbuis zonder beschermende bus. Zuurstofverspreidende barrière-afsluiting - Model PEX.

Neutrale kleur. Voor vloerverwarming, warm en koud water distributiesystemen. Druk: 6 bar. Temperatuur: 95°C. (10 bar en 70°C). DVGW geïnspecteerd en goedgekeurd.

G.800
G.800
Quantities as indicated below of insulation heating panels for underfloor heating systems ´CLASSIC FLOOR´ in polystyrene with anti-steam film in polyethylene 0.15mm and depth of trail for pipe 16/17 Borders male /female for fitted layout.

Afmetingen (mm): 1350 x 750 x 45 ( 15 + 30).

G.802
G.802
Rol van 100 m isolatietape voor plinten in expansiepolyethyleen (dikte: 6 mm - breedte: 150 mm). Om aan te brengen tussen vloer en muren, voor het leggen van de vloerverwarming.

Voorkomt warmteverlies en absorbeert vloerexpansie.

G.804
G.804
Tank met 10 kg vloeibaarmakende sostantie voor cement.

Indien toegevoegd aan een cementmix, wordt een nog betere bedekking van de verwarmingsbuizen gegarandeerd. Moet verdund worden voor gebruik in de verhouding 1.3 kg voor 100 kg cement.

G.810
G.810
Insulation panels for underfloor heating systems ´SISTEMA FLAT´ with flat surface and with anti-steam filmin polyethylene 0.15mm- borders male/female forfitted layout. Quantities as indicated below .

Tech. characteristics: Density: 30 Kg/m3 Conductivity 0,0332W/mK Acoustic absorbtion: 10dB heat resistence: 0,786 m2K/W Load resistence: 150 KPa Fire resistence: Class E

G.815
G.815
Pack 600g of synthetic fibre to increase the mecchanical characteristics of the cement and avoid withdrawl.

Dosing: 600 gr. for cubic meter of cement.

G.818
G.818
Roll of PE polyethylene sheet 100m long and 1,5m in hight when folded is used to place over flat insulation panel (art G.810.20) used as a stern barrier; suitable for radiant systems with soldered mesh or fixing materials.

G.820
G.820
Pack of 10 dilation compensators 2m long in foam rubber with adhesive end.

G.822
G.822
Pack of 50 pipe guides suitable for the laying down of pipe with distance of 6cm. The holes on the base allow for further fixing to the insulation with the use of special modular clips.

G.824
G.824
Pack of 10 supports to be used as spacers for double mesh when laying down cement.

Ensure the lifting of 30mm of the mesh from the bottom and distance between the two wire meshes (60mm) and the pipes.

G.826
G.826
Pack of 200 plastic pipe fixing clips for diameters 14-20 for manual insertion on mesh with wire of diam 3mm.

G.828
G.828
Holder with 50 plastic pipe clips for diam 14-17 for automatic insertion on mesh with wire diam 3mm by using appropriate tool ´Tacker´ art G.835.00.

G.830
G.830
Pack of 500 wire mesh fixing clips for application to insulation panels 28mm high. Distance between points 75.

G.831
G.831
Pack of 500 manual pipe clips.

For manual fixing OF PIPES TO INSULATION PANELS UP TO DIAM 20 and also for fixing of pipe guides art G.822 45mm high. The insulator must have a minimun thickness of 30mm.

G.835
G.835
Clip fixer ´Tacker´ tool.

For the automatic insertion of pipe fixing clips. Art G.836.20 and G.828.20.

G.836
G.836
Pack of 300 pipe fixing clips. 10 strips of 30 pieces.

Suitable for automatic fixing of pipes up to diam 20mm onto insulation panels with special tool ´Tacker´ art G.835.00 and also for fixing of pipe guide art G.822.

G.900
G.900
Coil PEX-AL meerlaagsbuizen.

Voor warm en koud water distributiesystemen, radiatorinstallaties & vloerverwarming. Druk: 10 bar. Temperatuur: 95°C.