Antares Water temperature reducers

4 way thermostatic mixing valve, threaded and adjustable.

Control range. 30-60°C Indicated for temp. reduction of underfloor heating systems. Control adjustable with knob.

Thermostatic mixing valve for underfloor heating systems.

Körper aus gesandetem und verchromten Messing. Regelbereich: 20° - 50°C. Regelskala 1-5. Sehr klein, daher kann man den Mischer direkt vor den Verteilersammelleitungen einbauen, um die Temperatur der Fußbodenheizung zu senken.

E.150

Thermostatischer Mischer ´L´ in Messing für Fußbodenheizung und um die konstante Temperatur zu regulieren: 20°C-45°C

Für Anwendungen bei denen die Zugangs-/ Ausgangsrohre parallel sind.

G.068

– Low temperature module applicable to manifolds, even in closets,for underfloor systems with fixed point temperature setting : 20° -50°C Complete of hydraulic separator of 2m3/h with adjustable 3 way thermostatic mixing valve, high efficiency pump Alfamax RS25/60 with adjustable 6mt delivery, reset safety thermostat for stopping the pump in case of abnomalities, check valve within closing valve, 2 themostats, 1 drain cock, 1 automatic deareator and necessary pre-assembled fittings.

Connections 1´ With connections for high temperature ¾´ KV mix:3.5

G.069

- Low temperature module applicable to manifolds, even in closets,for underfloor systems prepared for regulating modulating temperature. Complete of servomotor applied to mixing valve and prepared for connection to climatic electronic control unit (Art T.101 on page..) or other make. The module is composed of: hydraulic separator of 2 m3/h, mixing valve, adjustable high efficiency pump Alfamax RS 25/60 with 6mt delivery, reset safety thermostat for stopping the pump in case of abnomalities, one

Connection 1´ With connections for high temperature ¾´

G.080

Couple stainless steel bar manifolds AISI 304 L preassembled 1”, with ¾” Euroconus with opening valves (return) and lockshield (flow) incorporated with support brackets. Complete of n.1 manual deareator, n.1 automatic deareator and n.2 drain cocks.

G.201

Suction valve for “Multiflex” tank with pull lever and foot valve. In brass with 1 ”M connection

Aanzuig- en retourkoppelingen: diameter 8, 10, 13 of 3/8´. Lengte aanzuigslang: 2.200 mm. Met diameter 6 koppeling, klaar voor aanhechting van niveaumeter A.040.00.

G.211

Compact mixing group with fixed point thermostatic temperature control, applicable to manifolds for radiating systems, adduction connections ¾´F

Composed of: Circulation pump in energy class “A”delivery 6mt Thermostatic valve with setting 20°- 50°C Balancing lockshield One way flow valve Temperature thermometer Safety thermostat with reset for stopping the circulator in case of accidental exceeding of set temperature (in respect of European legis. 2008/125/CE) Neccessary 3 piece preset fittings for connecting manifolds N.B. manifolds are not included in the price.

G.212

Compact mixing group with fixed point thermostatic temperature control, applicable to manifolds for radiating systems, complete of hydraulic compensator, this allows self management of the system. Guarantee of an excellent delivery and flow. Adduction connections 1´M

Composed of: Steel hydraulic compensator on primary circuit of boiler with flow from 3mc/h with thickness 75mm, apt to be lodged together with the manifolds in fitted cabinets – art G.173 and G.174. Circulation pump energy class “A” 6mt Thermostatic valve setting 20° - 50°C Balancing lockshield One way flow valve 2 temperature themometers Safety thermostat with reset for stopping the circulator in case of accidental exceeding of set temperature (in respect of European legis. 2008/125/CE) Neccessary 3 piece preset fittings for connecting manifolds N.B. manifolds are not included in the price.

G.216

Compact mixing group with fixed point thermostatic temperature control, applicable to manifolds for radiating systems, underneath connections (or reversable from above) adduction connections 1´

Composed of: N.B. manifolds are not included in the price. Circulation pump energy class “A” 6mt Thermostatic valve setting 20° - 50°C Balancing lockshield One way flow valve 2 temperature themometers Safety thermostat with reset for stopping the circulator in case of accidental exceeding of set temperature (in respect of European legis. 2008/125/CE) Neccessary 3 piece preset fittings for connecting manifolds

G.220

Mixing group with climatic modulating temperature control, applicable to manifolds for heating and cooling systems radiating panels, and other types of heating and cooling sysytems, underneath connections (or reversable from above) adduction connections 1´

Composed of: N.B. manifolds are not included in the price. Circulation pump energy class “A” 6mt 4 way mixing valve Servomotor opening and closing of the mixing valve predisposed for connection to control unit (our art T.101.07 or other makes). 2 temperature thermometers 2 flow control and stop valves Air vent valve Safety thermostat with reset for stopping the circulator in case of accidental exceeding of set temperature (in respect of European legis. 2008/125/CE) Neccessary 3 piece preset fittings for connecting manifolds

G.228

Connection kit for the distribution of high temperature for integrating to mixing group Art G.216.10 and G.220.10 to be junctioned with art G.067 or to any other type of manifold. Composed of 2 control valves, isolation and special various fittings for connections.

Om prijzen te bekijken log in

Water temperature reducers

CONTACTEN

Italia

ANTARES for Water & Fire Srl

OVER ONS