Antares Water temperature reducers

– Low temperature module applicable to manifolds, even in closets,for underfloor systems with fixed point temperature setting : 20° -50°C Complete of hydraulic separator of 2m3/h with adjustable 3 way thermostatic mixing valve, high efficiency pump Alfamax RS25/60 with adjustable 6mt delivery, reset safety thermostat for stopping the pump in case of abnomalities, check valve within closing valve, 2 themostats, 1 drain cock, 1 automatic deareator and necessary pre-assembled fittings.

Connections 1´ With connections for high temperature ¾´ KV mix:3.5

G.069

- Low temperature module applicable to manifolds, even in closets,for underfloor systems prepared for regulating modulating temperature. Complete of servomotor applied to mixing valve and prepared for connection to climatic electronic control unit (Art T.101 on page..) or other make. The module is composed of: hydraulic separator of 2 m3/h, mixing valve, adjustable high efficiency pump Alfamax RS 25/60 with 6mt delivery, reset safety thermostat for stopping the pump in case of abnomalities, one

Connection 1´ With connections for high temperature ¾´

G.080

Couple stainless steel bar manifolds AISI 304 L preassembled 1”, with ¾” Euroconus with opening valves (return) and lockshield (flow) incorporated with support brackets. Complete of n.1 manual deareator, n.1 automatic deareator and n.2 drain cocks.

G.230

Pre assembled compact cabinet with mixing group return and flow manifolds for radiating heating systems with thermostatic fixed point low temperature control with or without manifolds for heating components at high temperatures (towel dryers, radiators etc).

Composed of: Mixing group art G.211.10 Couple manifolds Art g.081 complete of: Connection of lockshields ¾´ euroconus Valves for the application of electtric actuators Flow regulators Automatic deareator Drain cocks Support brackets High temperature manifolds, if planned for Container cabinet Art G.174 See dimensions in table

G.235

Pre assembled compact cabinet with mixing group return and flow manifolds for radiating heating systems with thermostatic fixed point low temperature control, complete of hydraulic compensator, this allows self management of the system. Guarantee of an excellent delivery and flow with or without manifolds for heating components at high temperatures (towel dryers, radiators etc).

Composed: Mixing group art G.212.10 equipped with hydraulic compensator Couple manifolds Art g.081 complete of: Connection of lockshields ¾´ euroconus Valves for the application of electtric actuators Flow regulators Automatic deareator Drain cocks Support brackets High temperature manifolds, if planned for Container cabinet Art G.174 See dimensions in table

G.240

Pre assembled compact cabinet complete of mixing group for modulating climatic temperature control, and for manifolds for heating and cooling systems radiating panels, and other types of heating and cooling systems, adduction connections 1´F (from underneath or reversable from above).

Composed: A) Mixing group Art G.220.10 complete with 4 wat mixing valve motorized three points controllable by a climatic control unit non included. B) Couple manifolds Art g.081 complete of: Connection of lockshields ¾´ euroconus Valves for the application of electtric actuators Flow regulators Automatic deareator Drain cocks Support brackets High temperature manifolds, if planned for Container cabinet Art G.174 See dimensions in table

G.201

Suction valve for “Multiflex” tank with pull lever and foot valve. In brass with 1 ”M connection

Aanzuig- en retourkoppelingen: diameter 8, 10, 13 of 3/8´. Lengte aanzuigslang: 2.200 mm. Met diameter 6 koppeling, klaar voor aanhechting van niveaumeter A.040.00.

G.211

Compact mixing group with fixed point thermostatic temperature control, applicable to manifolds for radiating systems, adduction connections ¾´F

Composed of: Circulation pump in energy class “A”delivery 6mt Thermostatic valve with setting 20°- 50°C Balancing lockshield One way flow valve Temperature thermometer Safety thermostat with reset for stopping the circulator in case of accidental exceeding of set temperature (in respect of European legis. 2008/125/CE) Neccessary 3 piece preset fittings for connecting manifolds N.B. manifolds are not included in the price.

G.212

Compact mixing group with fixed point thermostatic temperature control, applicable to manifolds for radiating systems, complete of hydraulic compensator, this allows self management of the system. Guarantee of an excellent delivery and flow. Adduction connections 1´M

Composed of: Steel hydraulic compensator on primary circuit of boiler with flow from 3mc/h with thickness 75mm, apt to be lodged together with the manifolds in fitted cabinets – art G.173 and G.174. Circulation pump energy class “A” 6mt Thermostatic valve setting 20° - 50°C Balancing lockshield One way flow valve 2 temperature themometers Safety thermostat with reset for stopping the circulator in case of accidental exceeding of set temperature (in respect of European legis. 2008/125/CE) Neccessary 3 piece preset fittings for connecting manifolds N.B. manifolds are not included in the price.

G.216

Compact mixing group with fixed point thermostatic temperature control, applicable to manifolds for radiating systems, underneath connections (or reversable from above) adduction connections 1´

Composed of: N.B. manifolds are not included in the price. Circulation pump energy class “A” 6mt Thermostatic valve setting 20° - 50°C Balancing lockshield One way flow valve 2 temperature themometers Safety thermostat with reset for stopping the circulator in case of accidental exceeding of set temperature (in respect of European legis. 2008/125/CE) Neccessary 3 piece preset fittings for connecting manifolds

G.220

Mixing group with climatic modulating temperature control, applicable to manifolds for heating and cooling systems radiating panels, and other types of heating and cooling sysytems, underneath connections (or reversable from above) adduction connections 1´

Composed of: N.B. manifolds are not included in the price. Circulation pump energy class “A” 6mt 4 way mixing valve Servomotor opening and closing of the mixing valve predisposed for connection to control unit (our art T.101.07 or other makes). 2 temperature thermometers 2 flow control and stop valves Air vent valve Safety thermostat with reset for stopping the circulator in case of accidental exceeding of set temperature (in respect of European legis. 2008/125/CE) Neccessary 3 piece preset fittings for connecting manifolds

G.228

Connection kit for the distribution of high temperature for integrating to mixing group Art G.216.10 and G.220.10 to be junctioned with art G.067 or to any other type of manifold. Composed of 2 control valves, isolation and special various fittings for connections.

Om prijzen te bekijken log in

Water temperature reducers

CONTACTEN

Italia

ANTARES for Water & Fire Srl

OVER ONS