Antares Components for solar and biomass

Instant welded brazed heat exchanger ´AlfaMax´ steel plate AISI 304 large paralell flows .

Surface exchange for every plate: 0,023 m2 x number of plates . Water amount for every channel: 0,05 lt. x number of plate - max pressure 30barComplanar fittings : 2 x 3/4´M. + 2 x 3/4´M Opposite fittings. On one side:2 x 3/4´ M. On the other side 2 x 3/4´M. + 2 x 3/4´F. For S.008 (shells) see S.017

S.009

ALFAMAX instant brazed plate steel AISI 304 heat exchanger for large and paralell flows. Connections 1´ M.

Surface exchange for every plate 0.027m3 x number of plates - 2 - Amount of water contained per channel: 0.05lt x number of plates -1 - max pressure 30bar.

S.010

ALFAMAX instant brazed steel plate heat exchanger for large and paralell flows. Connection: 1 1/4 ´ M.

Surface exchange for every plate 0.063m3 x number of plates - 2 - Amount of water contained per channel: 0.15lt x number of plates - 1 - max pressure 30bar - Especially indicated for combining open circuits (solid fuel boilers) with closed circuits (mod. In steel aisi 304)and for heating pools (mod. In steel aisi 316).

F.660

Roll of adhesive aluminium tape suitable for sealing flues avoiding smoke dispersion and carbon monoxde exhalations in aereating shaft and other uses. - Lenght 50 mt. Excellent mechanical resistance. Thickness 0.4 mm. Max temp. 400°C.

F.661

Roll of adhesive tape in black fiberglass, soaked with siliconic sealant suitable for air tight sealing flues and carbon monoxide exhalations. Lenght 50 mt. Excellent mechanical resistance. Thickness 165 micron. Width 25 mm. Max temp. 500°C.

F.730

Pack of 10 caps for flue and flue gas probe with silicone gasket and screws.

P.023

ANTARES high-energy efficiency circulator pump type MODULEX SOLAR with frequency modulation inverter and with PWM2 or PWM1 parameterizable control socket, equipped with AUTO ADAPT self-adjusting function, with and without PWM cable connection. Especially suitable for solar thermal systems.

Max flow rate: m3/h, 4,1. Self-regulating. Satisfies every need of a circulator in a single product. Comes with gaskets and power supply cables, and PWM socket cable. Power 230 Vac - 4-year warranty.

T.210

Temperature probe for solar panels Pt 1000Cl. B EN60751.

Sensor in steel tube 6x50mm- Grey silicon cable Length . 1000mm – pre insulated tips. Temperature range -50/+180°C

T.224

Temperature probe for Pt 100 solar panels.

Sensor in 6x50mm stainless steel tube - Length: 2000mm. Temperature scale -30/+150°C

E.011

Brass safety valve for solar systems with larger female entrance and exhaust. CE approved.

Max. temp. 150°C Suitable also for water mixed with glycol antifreeze upto 50% as from DIN 4757.

E.033

Combined temperature and pressure safety valve for protection of surplus tanks.

Suitable for sanitary water, vertical installation and horizontal only if drenage is towards bottom. In compliance with leg. PED 97/23 CE Drainage temperature: 92°C (+3°C).

R.069

Pack of 4 non-asbestos insulation panels (1 m x 0.5 m) for a total of 2 sq. m. Thickness: 5 mm. Max working temp. 700°C.

To produce made-to-measure heat insulation panels for boilers and for the connection between boiler & burner. Max temp. 700°C.

To view prices, log in

Components for solar and biomass

CONTACTS

Italia

ANTARES for Water & Fire Srl

WHO ARE WE