Spares for boilers, burners and stoves (1.)

Spares for boilers, burners and stoves

1 2 3 4 5 .. 10 .. .. 20 .. .. 30 .. .. 40 .. .. 50 .. .. 60 .. 66 96 48 24 12 4 Nr. A-Z

Anti-syphon solenoid valve for gasoil or heavyoils.

Connections: 3/8´ F.F. Usually installed in feeder pipe if tank is located higher than burner. Vertical mounting, 230 V - 50 Hz., N.C. When prompted opens - passage 8 mm.

A.080

Diesel oil meter ´CONTOIL´.

Can be installed directly between the burner pump and the nozzle.

A.100

Auxiliary feed pump for diesel or fuel oil burners.

Usually mounted above tank as auxiliary pump. - Flow rate 10 l/h at a pressure of 2 bar - Power supply 230 V - Vertical suction inlet height: 2 m. - Supplied with flexible hose.

A.101

Pressure reducer for diesel oil.

Conns: 3/8´ M. or diameter 10. Flow rate 20 l/h - Inlet pressure 0.5 - 6 bar. Outlet: 0.1 bar

A.102

Rotary motor pump for auxiliary feed of diesel oil to burners installed at great distance from tank. C/w. 2 flex. hoses - 230 V - 150.

B.054

Solenoid gas valve, normally closed with manual reset. (N.C.)

230 V - 50 Hz. Shuts off mechanically in case of power failure. This valve is installed in combination with Art. B.045, B.050 and B.052.20. Resetting of solenoid valve must be done manually. Max. operating pressure 500 mbar. N.B: For counterflanges Art. V.150,

B.055

Solenoid gas valve, normally open with manual reset.

230 V - 50 Hz. Shuts off mechanically on receiving an electric impulse. This solenoid valve is installed in combination with Art. B.045, B.050, B.051.90, B.052.20. Max. Pressure 500 mbar.

B.056

Solenoid valve connector according to DIN 43650 standard.

For solenoid valves Art. H.500 or coils Art. H.501

B.057

Gas solenoid valve normally open manual reset

Supply 9-12 Vdc – Max. pressure: 1.000 mbar. Receiving an electtric impulse from the gas detector, the solenoid valve closes.The installation of this solenoid valve can be matched directly with detector B.038.00 with the independant power line (stand alone) with detectors B.045 - B.050 - B.051 - B.052.

B.070

“GUARDIAN” kit composed of gas detector for expolosive gases art B.038.00 and stop solenoid valve manual reset in the below listed diameters art B.057 on page 42 (F) The gas detector sensing the presence of gas emitts a sound and controlls the solenoid closure of flow manual reset

Supply unit: 230 Vac. Output of alarm command: 12Vdc – eventual impulse for solenoid valve. Degree of protection: IP 42 – Catalytic sensor with alarm threshold: 10% LIE

C.030

Electric threaded copper resistance for boilers.

Diameter 1 1/4´ M. - with thermostat pocket - 230 V.

C.031

Flanged electric copper resistance for boilers.

1 2 3 4 5 .. 10 .. .. 20 .. .. 30 .. .. 40 .. .. 50 .. .. 60 .. 66 96 48 24 12 4 Nr. A-Z

To view prices, log in

Spares for boilers, burners and stoves

CONTACTS

Italia

ANTARES for Water & Fire Srl

WHO ARE WE