Antares Pipes

G.138

.F. brass elbow, yellow or bright chrome.

F.083

1 kg pack of stearine.

Deoxider to solder pipe joints in lead brass copper iron zinc. Makes soldering easier. Pack 10 rods.

G.704

100 m. coil of cross-linked polyethylene pipe - Model PEX. Colour: Neutral.

For hot & cold water distribution systems, underfloor heating & radiator systems. Pressure: 10 bar. Temperature: 95° C.

G.134

3 piece eccentric fitting to facilitate connection where there is disassesment. (Eccentricity 16 mm).

V.081

3- piece straight brass M.- F. connection with O-ring.

V.080

3-piece brass elbow M. - F. connection with O-ring.

Z.341

3-piece bronze F. solder fitting with M. thread.

G.160

3m brass tube that can be cut and threaded according to one´s need.

Z.041

45° copper F. F. bend solder fitting.

Z.040

45° copper M. F. bend solder fitting

R.597

5 m coil of soft copper pipe, diameter 6 mm for connecting gas oil pump, solenoid valve & nozzle and for gas feeding to pilot burners.

G.705

50 m. coil of cross-linked polyethylene pipe - Model PEX - with removable protective sleeve.

For hot & cold water distribution systems, underfloor heating & radiator systems. Pressure: 10 bar. Temperature: 95° C.

M.150

5mt coil of bendable chrome plated copper tube, cut to measure for the connection of sanitary devices.

Z.090

90° copper F. F. bend solder fitting

Z.092

90° copper M. F. bend solder fitting

F.668

Adhesive tape in foamed reinforced rubber with black close cells and throaway protection film.

Suitable for the insulation of hot and cold pipes, in particula for the cooling production and distribution systems and for special parts that cannot be insulated with tubular pipe insulators. Thickness 3mm.

N.422

Adjustable stainless steel wall clamp.

N.507

Alluminium reducer neutral colour diameter from 50mm to 40mm for suction tube.

F.664

Amalgamating protective tape for the parts of the pipe where the external sheath has been removed in order to allow joint . Regulation forsees that these parts must be covered with yellow protective tape

Width 25mm Thickness 0,5mm Length 5mt.

G.153

Barrel nipples in brass M.M.

G.159

Bras ´T´ M x F x M for various uses in fittings and for the union polyethylene pipes together with Art. U.007 and multilayer pipe combined with Art. U.017.

G.166

Brass 3 piece connection fitting for tanks with drain with smooth running nut and straight spigot.

G.165

Brass 3 piece connection fitting for tanks with smooth running nut and curved spigot

G.164

Brass 3 piece connection fitting for tanks with smooth running nut and straight spigot.

G.918

Brass angle fitting 40mm high with 3 holed flange. F thread end and press fitting eng for multilayer and ployethylene pipe.

G.919

Brass angle fitting 53mm high with 3 hole flange F thread end and brass press fitting end for multilayer and polythene pipe.

W.023

Brass angle screw-on fitting 1/2´ F. with application flange.

G.141

Brass cross fitting,.

G.864

Brass elbow fitting with M thread end and compression end for multilayer pipe.

G.914

Brass elbow press-fitting for multilayer pipes. Also suitable for polyethylene pipe

G.916

Brass elbow press-fitting for multilayer pipes. with F thread end and also for polyethylene pipe.

G.915

Brass elbow press-fitting fwith M thread end for multilayer and polyethylene pipe.

Brass F. tee.

Brass flange for smoke pipeline with union for insertion with bolt air tight for smoke thermometer with bulb diam: 9 (Art E.165).

G.748

Brass M. tee.

G.151

Brass reducing ring M.-F.

G.161

BRASS ROD WITH SMOOTH RUNNING THREAD.

W.015

Brass screw-on fitting with straight female end.

W.010

Brass screw-on fitting with straight male end.

G.163

Brass smooth running nut

G.158

Brass T M. - M. - M. in brass for various uses in fittings and for the union polyethylene pipes together with Art. U.007 and multilayer pipe combined with art. U.017.

G.922

Brass T press fitting with central M thread end for multilayer and polythene pipe.

G.140

Brass tee, yellow or bright chrome.

G.745

Brass wall plate elbow & 1/2´ F. connection.

G.921

Brass ´T´ press-fitting with central F thread end for multilayer and polyethylene pipe

Z.155

Bronze 90° elbow F. solder fitting with F. thread.

Z.158

Bronze 90° elbow F. solder fitting with M. thread.

Z.153

Bronze F. solder fitting with F. thread.

Z.150

Bronze F. solder fitting with M. thread.

Z.162

Bronze flanged elbow solder fitting w. F. thread.

Z.165

Bronze tee solder fitting, F. conn. & central F. thread

G.927

Cap for mutilayer and polythene pipe.

M.166

Chrome plated brass angle tap for under sink combined with washing machine fitting and anti reflux screw. Complete with roses.

Connection 1/2´ M. x 10 x 3/4´ M.

M.165

Chrome-plated angle valve for underwash-basin with integrated filter (accessible for inspection), complete with rose 1/2´ M. x 10.

M.161

Chrome-plated brass angle valve fitting for underwash-basin with rose, nut & washer.

M.120

Chrome-plated copper pliable tube diameter 10 mm c/w collared end and connecting nut. Opposite end can be connected to Art. M.151, M.152, M.160, M.161, M.165.02 .

M.159

Chrome-plated elbow underwash-basin fitting. Telescopic extension with sliding rose. Extension from 55 mm to 105 mm. Conn. 1/2´ M. x 10.

M.151

Chrome-plated fitting with nut & washer.

M.152

Chrome-plated fitting with sliding shaft for hexagonal rose with nut & washer diameter 10 mm.

H.155

Coil of 100 m polyethylene hose with sprinkling holes diameter 16 every 300 mm; Flow Rate 2 l/h.

F.086

Coil of 250g soldering wire at low temperature.

A.042

Coil of 50 m polyethylene capillary hose for watering systems. External Ø 6 mm - Internal Ø 4 mm - Thickness 1 mm.

E.341

Coil of corrugated flexible pipe CSST (Corrugated stainless steel tubing) in stainless steel AISI 316 ´INOFLEX´ parallel spiral coils with protective yellow sheath (MDPE) suitable for gas systems, conforming with leg. EN15266. Can connect with the fittings below.

Thickness 0.3 mm Max temp. 100°C max pressure 0.5 bar.

E.340

Coil of corrugated flexible pipe CST (Corrugated Stainles Steel tubing) in stainless steel AISI 316 ´INOFLEX´ with paralle spiral coils for flow of drinkable water and domestic. Can be cut to measure without any particular tool and connect with the fittings E.346 - E.348 - G.147 - G.149 - G.167 - G.158

Thickness 0.3 mm. Max temp 550°C max pressure 15 bar.

G.700

Coil of cross-linked polyethylene pipe without protective sleeve - Oxygen barrier sealed - Model PEX. Neutral colour.

For central & underfloor heating systems, hot & cold water distribution systems. Pressure: 6 bar. Temp.: 95° C. (10 bar and 70 ° C.). D

E.342

Coil of flexible tube ´INOFLEX CSST´ for solar systems. In stainless steel AISI 304 corrugated parallel spires thickness 0,3mm in defined length with isolating expanding sheath EPDM 13 mm and coated with protective film against UV rays and from ware and tare with or without multiphase cable for temp. probes.

Max temp: - 40 + 150°C - presure PN 15bar.

G.903

Coil of PEX - AL multilayer pipe with self-extinguishing red closed cell protective cover-

For the distribution of hot and cold water, radiator heating sytems and underfloor heating. Pressure 10bar temp. 95°C.

G.905

Coil of PEX - AL multilayer pipe with corrugated red protective cover.

For the distribution of hot and cold water, radiator heating systems and underfloor heating. Pressure 10 bar temp. 95°C.

G.904

Coil of pex-al multilayer pipe with corrugated blue protective cover.

For the distribution of hot and cold water, radiator heating systems and underfloor heating. Pressure 10 bar temp. 95°C.

G.900

Coil of PEX-AL multilayer pipe.

For hot and cold water distribution systems, radiator systems & underfloor heating. Pressure: 10 bar. Temperature: 95°C. SKZ certificate No. A-270.

G.902

Coil of PEX_AL multilayer pipe with inflammable blue closed cell protective cover.

For the distribution of hor and cold water, radiator heating systems and underfloor heating. Pressure 10bar. Temperature: 95°C.

D.300

Compression ball valve made of PP plastic.

Z.085

Copper cross-over solder fitting, F. F.

Z.103

Copper reducer socket solder fitting, F.F.

Z.380

Copper reducer tee solder fitting, F. F. F.

Z.100

Copper socket solder fitting, F.F.

Z.130

Copper tee solder fitting, F.F.F.

E.345

Double pipe (outward and return) of “INOFLEX CSST” flexible hose for solar systems, in AISI316L stainless steel corrugated with parallel coils, thickness 0.3 mm. in the defined length with 13 mm PES insulation covering and externally covered with protective film from UV rays and mechanical wear, with multiphase cable for the temperature probes. -

Operating temperatures -60°C/+150°C (180°C Peak)

E.349

Double pipe corrugated hose ´KLIMA CSST´, ready to be laid underground for heat pumps, biomass powered heating systems and technological uses, in stainless steel AISI 304, thickness 0,3 in the length defined on the table with low thermal conductivity nanotechnological aerogel insulation coating: 0,017 W/mK @ 10 °C. With UV protective wrap - Can be directly laid underground.

Maximum operating temperature: 200 °C. Pressure PN 15 bar.

N.405

Elbow at 45° degrees M/F single wall for smoke shaft in black varnished stainless steel single wall thickness 0.4 mm, supplied with siliconic seal also for positive pressure.

N.406

Elbow at 90° degrees M/F single wall for smoke shaft in black varnished stainless steel single wall thickness 0.4 mm, supplied with siliconic seal also for positive pressure.

G.858

Elbow brass fitting with F thread end and 3 holed flange and compression end for multilayer pipe.

G.856

Elbow brass fitting with F thread end and compression end for multilayer pipe.

G.855

Elbow brass fitting with M thread end and compression end for multilayer pipe

D.230

Elbow female end press fitting

W.112

Elbow fitting for copper pipe

W.115

Elbow for copper pipe with M. threaded end.

W.119

Elbow for copper pipe with F. threaded end.

W.121

Elbow for copper pipe with mounting flange and F. threaded end.

W.017

Elbow in brass threaded male end.

D.240

Elbow intermediate press fitting

D.270

Elbow male end press fitting

G.144

Equal or reducing brass threaded nipples M.M. - yellow or bright chrome.

N.425

Exhaust end-unit with stainless steel protection net. To be used in case of horizontal discharge.

D.330

F / F threaded plastic ball valve

To view prices, log in

Pipes

CONTACTS

Italia

ANTARES for Water & Fire Srl

WHO ARE WE