Antares Thermostats

Double aquastat with immersion pocket and 2 controls with knob.

Adjustable temperature range: 0°C ÷ 60°C and 30°C ÷ 120°C. Switch contacts. Sheath connection 1/2´, sheath length 100 mm.

T.044

Humidistat and thermostat combined in a single device with backlit display. Wall installation - 230 Vac power supply.

Humidistat and thermostat combined in a single device with backlit display. Wall installation - Power supply 230 Vac. Display: set values and current values: Humidity adjustment range: 30% R.H. Accuracy + - 3% Temperature adjustment range / Protection degree: IP

T.115

Electronic thermostat with display with 1/2´M immersion well and temperature display. Adjustment range 5° - 80° C Well length: 50 mm - Power supply 230 Vac Contacts: ON - OFF - 10A Protection IP 40

Well length: 50 mm - Power supply 230 Vac Contacts: ON - OFF - 10A Protection IP 40

T.116

Electronic thermostat with contact display, with temperature display. Adjustment range: 5ºC - 80ºC Complete with spring clip.

Power supply: 230 Vac - Contacts: On-Off - 10 A. - IP 40

T.223

Temperature probe normally used for floor heating systems. Complete with 3 mt. of cable. Can be connected to thermostats Art T.420 It can also be used to measure the temperature of the pipes, room temperature and outside temperatures.

Type NTC 25° = 10K - Diameter 7 mm. Control -9,5°C / 99,5°C

T.225

Radio frequency room thermostat and receiver for heating and cooling systems. Maximum signal distance: 200 mt in open space.

The thermostat transmitter is powered by 2 x AA batteries and the receiver is powered by 230 V AC. They can control from the distance and wireless, a boiler, motorized valve and any electrical appliance. Always paired together, the thermostat transmitter + the receiver can control how many are, and the switching on and off the zone valves or other electrical appliances. The thermostat comes with a large LCD digital display that shows room temperature and the set temperature. White color wall-mounting box.

T.230

´SLIMTRON´ Digital, touch-screen, radio-frequency room chronothermostat. It communicates wireless with its appropriate receiver (see next item). Daily and weekly programms. Elegant and refined design. 111 x 82 x 23 light beige color wall-mounting box. Power supply: 2 x AA batteries. Maximum signal distance: 200 mt in open space.

Compatible with single-channel RF receiver T.235 and multichannel receiver T.241.08 Transmission frequency: 433 MHz. Allows for the programming of several room temperatures 24 hours a day, every day of the week. Wide backlite LCD touchscreen display. Comes with antifreeze function and key lock.

T.235

One channel RF receiver with a built-in antenna. Compatible with the T.230 chronothermostat. Maximum signal distance: 200 mt in open space.

Receiving frequency: 433 MHz. Power supply: 230 VAC. Outputs: Control 3A Consent pump 3A. Coupled with the thermostat Art T.230.03 can control a boiler, a motorized valve, an actuator or another electrical equipment. Can be used as an additional receiver to the 8 channels receiver (Art. T.241.08) to increase the total amount of receivers needed for the system. Ready for connecting to an external temperature probe (optional Art. R.223 and R.220.7 ) for floor heating systems, to control the maximum temperature of the flow pipe.

T.239

Plastic wiring box for electrical connections between wired thermostats and electrical actuators (Art. V.058), mounted on the manifold with electronic circuit consent for the circulation pump and boiler. In order to achieve this, the wires of all thermostats (or chronothermostats), the actuators and the pump must be grouped in the box to be installed close to the manifold. The internal electronic circuit provides an output for switching on and off the circulation pump when one or more thermostat

You can combine up to 4 actuators on the same output. - Input voltage: 230 VAC - Voltage actuators output: 230 VAC - Voltage pump output: 230 VAC 4 A.

T.241

Multichannel RF receiver for signals coming from wireless thermostats Art. T.230.03. Comes in a plastic box with connections for the manifold´s electric actuators and with an electronic circuit consent for the circulation pump and boiler. To be installed near the manifold considering the RF signal reception capacity is within 200 meters of open space. The circuit provides an output for switching on and off the pump (and boiler) when one or more thermostats call for heat.

Up to 4 actuators can be combined together on the usual outlets - Receiving RF signal: 200 m in an open space - Input voltage: 230 VAC - Actuators output voltage: 230 VAC Pumps voltage: 230 VAC AA - Frequency: 433 MHz - Compatible with model T.230.03 - Note: For more than 8 channels, add for each channel an additional receiver - Art. T.235.

T.243

Electrical connections plastic box, with terminal blocks for 24 sizes. IP pressure: 55.

T.420

´EASYTRON´ Digital daily chronothermostat. It allows for the programming of a comfort temperature and a reduced temperature during 24 hours a day. The digital display allows a simple and easy programming. Ready for connecting an external temperature probe for underfloor heating systems (optional T.223, to limit and control the minimum floor temperature. Recessed box: 72 x 72 (Art. T450.60). Outputs ON / OFF 3 A.

Power supply: 230 V AC - Adjustable room temperature: 5°C to 50°C. Displays the room temperature and the daily schedule. Adjustment of the temperature probe: 5°C to 60°C pre-set to 35°C. Elegant and refined design. Antifreeze function.

To view prices, log in

Thermostats

CONTACTS

Italia

ANTARES for Water & Fire Srl

WHO ARE WE