Antares Circulating pumps

Couple of threaded widening rings for the substitution in pumps that have smaller joints complete with rubber NBR washers.

E.478

Fullway ball valve with 11/2´F conn. with ISO T handle suitable for systems with heat insulation in nickle plated brass type CW617 UNI 12165.

The handle in nylon can hold thermometer E.479.00 Max pressure 30bar.

F.812

Hex key with ´T´ handle

For easy replacement of circulation pump motors

P.095

High energy efficiency HOTMATIC 15-1.5 type recirculation pump for domestic hot water with brass body. Consumption: 8 W. - 230 Vac.

Connections: 1 ´F. - Complete with an insulating shell - Flow rate: 0.9 m3 / h - Head: 1.5 m. With electronic control display with programming for: - operation at hourly intervals over 24 hours - operation with temperature control - washing function to avoid the formation of bacterial colonies

P.079

High-efficiency circulation pump ANTARES, model “AlfaMega” 40, with DN 40 flanged connections, wet rotor design. Single-phase 230 VAC version, with frequency modulation control. Cast iron pump body, designed for reliable and energy-efficient operation.

With proportional pressure control and constant pressure control functions.

E.621

Invertable relaunch assembly DN25, composed of 2 ball valves with thermometer and one way valve, high efficency adjustable circulation pump ´Modulex Hybrid´ 6mt delivery, alignment spacer and ball valve with screw-driver adjustment for eventual substitution of pump and isolation shell.

* For power up to 50 KW: predispoded for insertion of by-pass valve for eventual over pump pressure (Art. P.301.03).

E.630

Invertable relaunch module DN 32 composed of 2 ball valves with thermometer and integrated one way valve, high efficiency adjustable circulating pump ´Modulex Hybrid´ with 6mt delivery, ball valve for eventual substitution of pump and isolating shell. Suitable for power upto 125 KW - Connections: 11/4´M and 11/2´ with largening rings included.

P.070

Isolating coat in black polystyrene for thermal protection of bodies for pumps.

E.429

Kogelkraan, volle doorlaat, met V. wartelmoer & vleugelgreep.

Max. druk 30 bar - Vernikkelde messing.

E.430

Messing kogelkraan met pompkoppeling en schroevendraaier-aanpassing.

E.432

Messing kogelkraan met pompvereniging.

Vleugelgreep - vaste verbinding 1´ V. x 1 1/2´ V. wartelmoer.

P.004

Messing verlengstuk 1 1/2´ M.V. om een circulator aan te passen in hoogte van 130 tot 180 mm.

E.606

Module bestaande uit 2 kogelkranen met schroevendraaier-aanpassing 1´ M. x 1 1/2´ V wartelmoer compleet met 4 afdichtringen en een 1 1/2´ M. x 1 1/2´ M. buis om de pompafstand te overbruggen.

E.631

Module bestaande uit 2 kogelkranen met verb. (Art. E.430.10), een mengventiel (Art. E.614.12) met parallel aanvoer- en retourkoppeling 1 1/2´ M. aan de boilerkant, circulatiepomp (Art. P.064), 2 kogelkranen (Art. E.608.10) met 2 thermometers, 1 controleventiel. Uitgangverloopstuk 1´ V. Ingang verb. 1´ M. Tussenafstand uitgangen 125 mm.

Dit model kan eveneens gecombineerd worden met een apparaat dat overdruk voorkomt (Art. E.615.10).

E.624

Module DN25 for lowering and regulating modulating temperature with separate electronic apparatus (see art. T101). Suitable for systems with high and low temperature (radiators and panels) composed of 2 ball valves with thermometer and one way valve, high efficiency adjustable circulating pump ´Modulex Hybrid´ 6mt delivery, 3 way motorized mixing valve with by-pass, alignment spacer, and ball valve screw-drive adjustable for eventual substitution of pump, safety thermostat manual rest for stoppi

Predisposed for insertion of by-pass valve for eventual over pump pressure for power up to 38 KW (Art P.301.03) ** For servomotor characteristics see art. T.109.

E.623

Module DN25 for lowering and regulating thermostatic temperature at fixed point of : 30° - 60°C for systems with radiant panelscomposed of 2 ball valves with thermometer and one way valve, high efficiency adjustable circulating pump ´Modulex Hybrid´ 6mt delivery, 3 way thermostatic valve, alignment spacer, and ball valve screw-driver adjustable for eventual substitution of pump, safety thermostat manual reset for stopping pump in case of abnormalities and isolating shell.

* predisposed for insertion of by-pass valve for eventual over pump pressure (Art P.301.03).

E.438

Module mounted ball valve with pump connection and red pocket handle for thermometer + thermometer . Thermometer scale 0°C-160° C. Check valve and fixing holes.

Pressure max: 10 bari - Temp max : 140°C -Conn. 3/4´ F. x 1´ F. swivel.

E.437

Module mounted ball valve with pump connection with coloured handle pocket for thermometer. Pressure max. 10 bar. Conn. 1´ 1/4´ F x 2´ F swivel.

E.439

Module mounted ball valve with pump connection side connection 3/4´ F with blue coloured handle pocket thermometer + thermometer. Thermometer scale 0°C-160° C. Check valve, disconnection and passage holes.

Pressure max 10 bar temp- max 140° C conn. 3/4´ F x 1´ F swivel.

E.435

Monoblok kogelkraan met pompaansluiting en één zij-aansluiting, uitgerust met gekleurde thermometerhouderhendel en thermometer.

Maximale druk: 10 bar. Thermometerschaal: 0 °C–120 °C. Aansluitingen: 1” binnendraad x 1 1/2” binnendraad draaibaar.

P.064

Nassläuferpumpe mit hoher Energieeffizienz, zertifiziert in Klasse A und mit Koeffiziente Energieeffizienz EEI niedriger als 0,20. Nassläufer– 2 Jahre Garantie. Bereits konform mit der neuen EU-Verordnung Erp 200/125/CE.

Die EU-Verordnung sieht die zwingende Verwendung der Nassläuferpumpen vor. Ab dem 01.01.13 Koeffizient EEI niedriger 0,27 extern am Wärmeerzeuger (Heizkessel) installiert. Ab dem 01.08.15 Koeffizient EEI niedriger 0,23 auch wenn im inneren des Wärmeerzeugers (Heizkessel) integriert an Solar-Stationen. Ab dem 01.01.20 Koeffizient niedriger als 0,23 auch für den Ersatz in bestehende integrierte Wärmeerzeuger (Heizkessel)

E.615