Antares Circulating pumps

Module mounted ball valve with pump connection and two side connections coloured pocket for thermometer + thermometer. Pressure max. 10 bar. Thermometer scale 0°C-120° C Conn. 1´ F x 1 1/2´ F swivel.

E.437

Module mounted ball valve with pump connection with coloured handle pocket for thermometer. Pressure max. 10 bar. Conn. 1´ 1/4´ F x 2´ F swivel.

E.438

Module mounted ball valve with pump connection and red pocket handle for thermometer + thermometer . Thermometer scale 0°C-160° C. Check valve and fixing holes.

Pressure max: 10 bari - Temp max : 140°C -Conn. 3/4´ F. x 1´ F. swivel.

E.439

Module mounted ball valve with pump connection side connection 3/4´ F with blue coloured handle pocket thermometer + thermometer. Thermometer scale 0°C-160° C. Check valve, disconnection and passage holes.

Pressure max 10 bar temp- max 140° C conn. 3/4´ F x 1´ F swivel.

E.478

Fullway ball valve with 11/2´F conn. with ISO T handle suitable for systems with heat insulation in nickle plated brass type CW617 UNI 12165.

The handle in nylon can hold thermometer E.479.00 Max pressure 30bar.

E.604

Spacer with flat seat to compensate in relaunch modules the lenght of the circulating pump with or without the valve.

E.606

Module bestaande uit 2 kogelkranen met schroevendraaier-aanpassing 1´ M. x 1 1/2´ V wartelmoer compleet met 4 afdichtringen en een 1 1/2´ M. x 1 1/2´ M. buis om de pompafstand te overbruggen.

E.615

Overdruk eliminerende module bestaande uit differentiëel ventiel Art. P.301.03 (3/4´ V.), n.2 ´T´ 1´M x 3/4´M x 1/2´M voor verbinding met Art. E.608.10.

De ventielinstelling wordt ingesteld door de indicator gelijk te stellen met de waarde die op het huis van het ventiel weergegeven wordt.

E.621

Invertable relaunch assembly DN25, composed of 2 ball valves with thermometer and one way valve, high efficency adjustable circulation pump ´Modulex Hybrid´ 6mt delivery, alignment spacer and ball valve with screw-driver adjustment for eventual substitution of pump and isolation shell.

* For power up to 50 KW: predispoded for insertion of by-pass valve for eventual over pump pressure (Art. P.301.03).

E.623

Module DN25 for lowering and regulating thermostatic temperature at fixed point of : 30° - 60°C for systems with radiant panelscomposed of 2 ball valves with thermometer and one way valve, high efficiency adjustable circulating pump ´Modulex Hybrid´ 6mt delivery, 3 way thermostatic valve, alignment spacer, and ball valve screw-driver adjustable for eventual substitution of pump, safety thermostat manual reset for stopping pump in case of abnormalities and isolating shell.

* predisposed for insertion of by-pass valve for eventual over pump pressure (Art P.301.03).

E.624

Module DN25 for lowering and regulating modulating temperature with separate electronic apparatus (see art. T101). Suitable for systems with high and low temperature (radiators and panels) composed of 2 ball valves with thermometer and one way valve, high efficiency adjustable circulating pump ´Modulex Hybrid´ 6mt delivery, 3 way motorized mixing valve with by-pass, alignment spacer, and ball valve screw-drive adjustable for eventual substitution of pump, safety thermostat manual rest for stoppi

Predisposed for insertion of by-pass valve for eventual over pump pressure for power up to 38 KW (Art P.301.03) ** For servomotor characteristics see art. T.109.

E.627

Anticondensation preassembled module for heat generators on solid fuel feed, with thermostatic assembly

Complete of circulating pump energy class A ´Modulex Hybrid´ with 6mt delivery, anticondensation by-pass, interception valve, thermometer and check valve, wall fixing brackets. Complete of isolating shell.. Model DN 25 for power upto 32 KW: Connection 1´ - Flow KV: 3,2.

E.628

Anticondensation module for heat generators on solid fuel feed with motorized mixing valve, high efficiency adjustable circulating pump ´Modulex Hybrid´ 6mt delivery, 2 ball valves with thermometer, check valve, alignment spacer and isolating shell

E.630

Invertable relaunch module DN 32 composed of 2 ball valves with thermometer and integrated one way valve, high efficiency adjustable circulating pump ´Modulex Hybrid´ with 6mt delivery, ball valve for eventual substitution of pump and isolating shell. Suitable for power upto 125 KW - Connections: 11/4´M and 11/2´ with largening rings included.

E.631

Module bestaande uit 2 kogelkranen met verb. (Art. E.430.10), een mengventiel (Art. E.614.12) met parallel aanvoer- en retourkoppeling 1 1/2´ M. aan de boilerkant, circulatiepomp (Art. P.064), 2 kogelkranen (Art. E.608.10) met 2 thermometers, 1 controleventiel. Uitgangverloopstuk 1´ V. Ingang verb. 1´ M. Tussenafstand uitgangen 125 mm.

Dit model kan eveneens gecombineerd worden met een apparaat dat overdruk voorkomt (Art. E.615.10).

E.634

Suction valve for “Multiflex” tank with pull lever and foot valve. In brass with 1 ”M connection

Aanzuig- en retourkoppelingen: diameter 8, 10, 13 of 3/8´. Lengte aanzuigslang: 2.200 mm. Met diameter 6 koppeling, klaar voor aanhechting van niveaumeter A.040.00.

F.812

Hex key with ´T´ handle

For easy replacement of circulation pump motors

G.183

Brass joint consisting of swivel metal sleeves and spigot.

P.002

Anschlußverschraubung aus Messing mit eingebautem Rückschlagventil.

Diese wird benutzt, um eine einzige Fließrichtung von der Flüssigkeit im Kreislauf zu garantieren und Verunreinigungen am Anlageneingang vorzubeugen.

P.003

– Plastic check valve internal insertment, equipped with steel spring for circular hold and o-ring.

P.023

ANTARES circulation pump type MODULEX SOLAR with high energy efficiency with frequency modulated inverter and with PWM2 or PWM1 parameterizable control socket, equipped with the AUTO ADAPT self-adjusting function with and without PWM cable connection. Specifically suitable for solar systems.

Max flow rate: m3 / h 3.3. Self-regulating. It satisfies all the needs of the circulator in a single product. Complete with gaskets and power cables. 230 Vac power supply. - 4 year warranty.

P.030

Antares circulation pump with air separator and automatic deaerator. Plastic composite body. Compatible with Wilo and Grundfos.

Compatible: Wilo NFSL12 / 6 - Ariston MTS, Arca, Biasi, Savio and others. For the performance curves see Art. P.060.6- and for the modulating model Art. P.110. 230 V 50 Hz - Complete with cables for the modulating model.

P.031

P.032

Circulator with body in composite plastic with incorporated automatic deareator.

Compatible: Wilo FRSL15 / 6 - FERROLI: Domitech, Domiproject, Divatop and others. For the performance curves see Art. P.060.5- and for the modulating model Art. P.110. 230 V 50 Hz - Complete with cables for the modulating model.

Om prijzen te bekijken log in

Circulating pumps

CONTACTEN

Italia

ANTARES for Water & Fire Srl

OVER ONS