Antares Circulating pumps

Compatible with GRUNDFOS, ANTARES and other brands with 68 mm distance between the fixing holes. Coupled to motors with impeller art. P.084.xx, P.074.xx or P.121.80 can constitute a complete circulator. - Complete with 2 gaskets for fittings.

P.066

AlfaMaior wet rotor circulation pump with high energy efficiency certified in class ´A´ and with an energy efficiency coefficient EEI lower than 0.20. With upfront electronic equipment.

Complies with European directive 200/125 / EC. Flow rates and head as shown in the table. 3 year guarantee.

P.065

AlfaMax circulating pump with wet rotor high energetic efficiency, certified in class A and with coefficiency factor EEl inferior to 0.20.

With sideward electronic equipment. Complete with insulating shell - Wet rotor - 2 year warranty. Already compliant with the new European directive Erp 200/125 / EC.

P.002

Anschlußverschraubung aus Messing mit eingebautem Rückschlagventil.

Diese wird benutzt, um eine einzige Fließrichtung von der Flüssigkeit im Kreislauf zu garantieren und Verunreinigungen am Anlageneingang vorzubeugen.

P.060

ANTARES Circulatiepomp Out of stock, see alternative item in the table below

230 V - 50 Hz

P.110

Antares circulation pump Modulex Hybrid type with frequency modulated inverter, energy class A, with wet rotor. With PWM control socket, equipped with the AUTO ADAPT function, self-adjusting with or without connecting the cable to the PWM regulator.

Max flow mc / H 4,1. Self-regulating. It meets all the needs of the circulator in a single product. Complete with gaskets and power cables. 230 Vac power supply - 4 years warranty

P.080

ANTARES circulation pump type AlfaMega 50-12 flanged DN50 high energy efficiency with wet rotor and PWM control socket. Single-phase 240 Vac frequency modulation - Max flow rate: 31m3 - Max head: 18m

With AUTO ADAPT function, proportional pressure control, constant pressure control, constant flow control. Cast iron body. IP42 protection.

P.023

ANTARES circulation pump type MODULEX SOLAR with high energy efficiency with frequency modulated inverter and with PWM2 or PWM1 parameterizable control socket, equipped with the AUTO ADAPT self-adjusting function with and without PWM cable connection. Specifically suitable for solar systems.

Max flow rate: m3 / h 3.3. Self-regulating. It satisfies all the needs of the circulator in a single product. Complete with gaskets and power cables. 230 Vac power supply. - 4 year warranty.

P.030

Antares circulation pump with air separator and automatic deaerator. Plastic composite body. Compatible with Wilo and Grundfos.

Compatible: Wilo NFSL12 / 6 - Ariston MTS, Arca, Biasi, Savio and others. For the performance curves see Art. P.060.6- and for the modulating model Art. P.110. 230 V 50 Hz - Complete with cables for the modulating model.

P.062

Antares circulation pump with air separator and automatic deaerator. Plastic composite body. Compatible with Wilo type Ku and GRUNDFOS Cocoa type.

Connections: 1 ”M. - Height of connections: 130. - 230 V - 50 Hz - Complete with cables for modulating models.

P.039

Antares circulation pump with air separator and automatic deaerator. Plastic composite body. Wilo KSL and Grundfos compatible.

For the performance curves see Art. P.060.6- and for the modulating model Art. P.110. 230 V 50 Hz - Complete with cables for the modulating model.

E.628

Anticondensation module for heat generators on solid fuel feed with motorized mixing valve, high efficiency adjustable circulating pump ´Modulex Hybrid´ 6mt delivery, 2 ball valves with thermometer, check valve, alignment spacer and isolating shell

E.627

Anticondensation preassembled module for heat generators on solid fuel feed, with thermostatic assembly

Complete of circulating pump energy class A ´Modulex Hybrid´ with 6mt delivery, anticondensation by-pass, interception valve, thermometer and check valve, wall fixing brackets. Complete of isolating shell.. Model DN 25 for power upto 32 KW: Connection 1´ - Flow KV: 3,2.

G.183

Brass joint consisting of swivel metal sleeves and spigot.

P.061

Circulatiepomp type ´MYL´ met luchtafscheider voor verwarmingsinstallaties.

P.040

Circulator body in composite material with incorporated automatic deareator.

For the performance curves see Art. P.060.6- and for the modulating model Art. P.110. 230 V 50 Hz - Complete with cables for the modulating model.

P.032

Circulator with body in composite plastic with incorporated automatic deareator.

Compatible: Wilo FRSL15 / 6 - FERROLI: Domitech, Domiproject, Divatop and others. For the performance curves see Art. P.060.5- and for the modulating model Art. P.110. 230 V 50 Hz - Complete with cables for the modulating model.

P.036

Circulator with body in composite plastic with incorporated automatic deareator. F

Compatible: JUNKERS BOSCH - DE DIETRICH and others.For the performance curves see Art. P.060.6- and for the modulating model Art. P.110. 230 V 50 Hz - Complete with cables for the modulating model.

P.034

Circulator with body in composite plastic with incorporated automatic deareator. For performance curves see art. P.060.6

Compatible: Wilo KSL 15/6, Grundfos CAOD, Viessmann and others.For the performance curves see Art. P.060.6- and for the modulating model Art. P.110. 230 V 50 Hz - Complete with cables for the modulating model.

P.090

Complete circulatiepomp in brons voor warm leidingwater - 230 V - 50 Hz - 2 jaar Garantie.

1 1/2´ M. Koppeling - 96 W - Max druk 10 bar.

P.050

Complete reservecirculatiepomp compatibel met ´ELM LEBLANC´ boilers.

Messing pomphuis - 3 snelheidsinstellingen - 230 V - 104 W - 2 jaar garantie.

P.005

Couple of fittings for extension or enlargening the diamenter of circulators from Ø 1´ al Ø 1 1/2´, Lengthening from 130 to 180 mm.

P.008

Couple of threaded widening rings for the substitution in pumps that have smaller joints complete with rubber NBR washers.

E.478

Fullway ball valve with 11/2´F conn. with ISO T handle suitable for systems with heat insulation in nickle plated brass type CW617 UNI 12165.

The handle in nylon can hold thermometer E.479.00 Max pressure 30bar.

F.812

Hex key with ´T´ handle

For easy replacement of circulation pump motors

P.095

High energy efficiency HOTMATIC 15-1.5 type recirculation pump for domestic hot water with brass body. Consumption: 8 W. - 230 Vac.

Connections: 1 ´F. - Complete with an insulating shell - Flow rate: 0.9 m3 / h - Head: 1.5 m. With electronic control display with programming for: - operation at hourly intervals over 24 hours - operation with temperature control - washing function to avoid the formation of bacterial colonies

P.079

High-efficiency circulation pump ANTARES, model “AlfaMega” 40, with DN 40 flanged connections, wet rotor design. Single-phase 230 VAC version, with frequency modulation control. Cast iron pump body, designed for reliable and energy-efficient operation.

With proportional pressure control and constant pressure control functions.

E.621

Invertable relaunch assembly DN25, composed of 2 ball valves with thermometer and one way valve, high efficency adjustable circulation pump ´Modulex Hybrid´ 6mt delivery, alignment spacer and ball valve with screw-driver adjustment for eventual substitution of pump and isolation shell.

* For power up to 50 KW: predispoded for insertion of by-pass valve for eventual over pump pressure (Art. P.301.03).

E.630

Invertable relaunch module DN 32 composed of 2 ball valves with thermometer and integrated one way valve, high efficiency adjustable circulating pump ´Modulex Hybrid´ with 6mt delivery, ball valve for eventual substitution of pump and isolating shell. Suitable for power upto 125 KW - Connections: 11/4´M and 11/2´ with largening rings included.

P.070

Isolating coat in black polystyrene for thermal protection of bodies for pumps.

E.429

Kogelkraan, volle doorlaat, met V. wartelmoer & vleugelgreep.

Max. druk 30 bar - Vernikkelde messing.

E.430

Messing kogelkraan met pompkoppeling en schroevendraaier-aanpassing.

E.432

Messing kogelkraan met pompvereniging.

Vleugelgreep - vaste verbinding 1´ V. x 1 1/2´ V. wartelmoer.

P.004

Messing verlengstuk 1 1/2´ M.V. om een circulator aan te passen in hoogte van 130 tot 180 mm.

E.606

Module bestaande uit 2 kogelkranen met schroevendraaier-aanpassing 1´ M. x 1 1/2´ V wartelmoer compleet met 4 afdichtringen en een 1 1/2´ M. x 1 1/2´ M. buis om de pompafstand te overbruggen.

E.631

Module bestaande uit 2 kogelkranen met verb. (Art. E.430.10), een mengventiel (Art. E.614.12) met parallel aanvoer- en retourkoppeling 1 1/2´ M. aan de boilerkant, circulatiepomp (Art. P.064), 2 kogelkranen (Art. E.608.10) met 2 thermometers, 1 controleventiel. Uitgangverloopstuk 1´ V. Ingang verb. 1´ M. Tussenafstand uitgangen 125 mm.

Dit model kan eveneens gecombineerd worden met een apparaat dat overdruk voorkomt (Art. E.615.10).

E.624

Module DN25 for lowering and regulating modulating temperature with separate electronic apparatus (see art. T101). Suitable for systems with high and low temperature (radiators and panels) composed of 2 ball valves with thermometer and one way valve, high efficiency adjustable circulating pump ´Modulex Hybrid´ 6mt delivery, 3 way motorized mixing valve with by-pass, alignment spacer, and ball valve screw-drive adjustable for eventual substitution of pump, safety thermostat manual rest for stoppi

Predisposed for insertion of by-pass valve for eventual over pump pressure for power up to 38 KW (Art P.301.03) ** For servomotor characteristics see art. T.109.

E.623

Module DN25 for lowering and regulating thermostatic temperature at fixed point of : 30° - 60°C for systems with radiant panelscomposed of 2 ball valves with thermometer and one way valve, high efficiency adjustable circulating pump ´Modulex Hybrid´ 6mt delivery, 3 way thermostatic valve, alignment spacer, and ball valve screw-driver adjustable for eventual substitution of pump, safety thermostat manual reset for stopping pump in case of abnormalities and isolating shell.

* predisposed for insertion of by-pass valve for eventual over pump pressure (Art P.301.03).

E.438

Module mounted ball valve with pump connection and red pocket handle for thermometer + thermometer . Thermometer scale 0°C-160° C. Check valve and fixing holes.

Pressure max: 10 bari - Temp max : 140°C -Conn. 3/4´ F. x 1´ F. swivel.

E.437

Module mounted ball valve with pump connection with coloured handle pocket for thermometer. Pressure max. 10 bar. Conn. 1´ 1/4´ F x 2´ F swivel.

E.439

Module mounted ball valve with pump connection side connection 3/4´ F with blue coloured handle pocket thermometer + thermometer. Thermometer scale 0°C-160° C. Check valve, disconnection and passage holes.

Pressure max 10 bar temp- max 140° C conn. 3/4´ F x 1´ F swivel.

E.435

Monoblok kogelkraan met pompaansluiting en één zij-aansluiting, uitgerust met gekleurde thermometerhouderhendel en thermometer.

Maximale druk: 10 bar. Thermometerschaal: 0 °C–120 °C. Aansluitingen: 1” binnendraad x 1 1/2” binnendraad draaibaar.

P.064

Nassläuferpumpe mit hoher Energieeffizienz, zertifiziert in Klasse A und mit Koeffiziente Energieeffizienz EEI niedriger als 0,20. Nassläufer– 2 Jahre Garantie. Bereits konform mit der neuen EU-Verordnung Erp 200/125/CE.

Die EU-Verordnung sieht die zwingende Verwendung der Nassläuferpumpen vor. Ab dem 01.01.13 Koeffizient EEI niedriger 0,27 extern am Wärmeerzeuger (Heizkessel) installiert. Ab dem 01.08.15 Koeffizient EEI niedriger 0,23 auch wenn im inneren des Wärmeerzeugers (Heizkessel) integriert an Solar-Stationen. Ab dem 01.01.20 Koeffizient niedriger als 0,23 auch für den Ersatz in bestehende integrierte Wärmeerzeuger (Heizkessel)

E.615