Antares Pipes

Verpakking van 10 afsluitdoppen voor rookkanalen en gasrookvoeler met silicone afdichtring en vijzen.

Coil 5 m zachte koperbuis, Ø 6 mm voor de aansluitng van een gasoliepomp, elektroventiel & spuitstuk en voor gastoevoer naar de dagbrander.

W.150

Verpakking van 5 koppelingen met knelring voor de aansluiting van gasoliepomp met elektroventiel & spuitstuk en ook voor gastoevoer naar dagbrander.

W.153

Verpakking van 5 drukkoppelingen in messing met knelring in messing, 1/8´ M. x Ø 6 mm.

G.180

Rechte V. slangkoppeling.

F.295

Pack of 2 white fixing collars for smoke pipes complete with 2 dowles 2 screws 6 nuts and 2 adjustable spacers Collar length mm 25*1,5.

F.296

Pack of 10 stainless steel collars, adjustable in diam. for fixing of smoke pipes. Complete with screws dowles 8*40 and adjustable spacers. Collar band 0,5*18. Adjustable distance from wall 60/100.

F.297

Zwaar verzinkte buisclip met gesoldeerde moer. Clipdikte 2.5 mm.

N.400

Straight smoke shaft in black varnished stainless steel single wall thickness 0.44 mm, with socket-fit, supplied with siliconic seal also for positive pressure use P1.

N.405

Elbow at 45° degrees M/F single wall for smoke shaft in black varnished stainless steel single wall thickness 0.4 mm, supplied with siliconic seal also for positive pressure.

N.406

Elbow at 90° degrees M/F single wall for smoke shaft in black varnished stainless steel single wall thickness 0.4 mm, supplied with siliconic seal also for positive pressure.

N.413

Tee connection F/M/M between smoke pipeline and pipeline for smoke with made side-fit at 90°, in black varnished stainless steel single wall thickness 0.4 mm, supplied with siliconic seal also for positive pressure.

N.415

Female-female for smoke shaft, to restore male-female socketing connection, after having cut to measure a straight smoke shaft, in black varnished stainless steel single wall thickness 0.4 mm, supplied with siliconic seal also for positive pressure.

N.418

Large wall covering rose for smoke shaft, black varnished stainless steel.

N.421

Tap with exhaust discharge in black varnish stainless steel, with siliconic washer.

N.422

Adjustable stainless steel wall clamp.

N.425

Exhaust end-unit with stainless steel protection net. To be used in case of horizontal discharge.

N.430

Vertical exhaust end-unit in stainless steel.

N.435

´Chinese´ chimney pot with F. conn., stainless steel. Black varnish.

N.460

High temp. black matt varnish spray up to 500°C, can of 400 ml.

N.463

Pack of 10 siliconic washer specific for smoke work.

N.501

– Length of alluminium tube white varnish, extenible for exhaust air suction in boiler and stove pellett

N.505

Stainless steel suction grid.

N.507

Alluminium reducer neutral colour diameter from 50mm to 40mm for suction tube.

E.163

Paneel voor rookkanaal met pyrometerhouder met aluminium deklaag. Model ´PT´.

E.164

Brass flange for smoke pipeline with union for insertion with bolt air tight for smoke thermometer with bulb diam: 9 (Art E.165).

E.165

Rookpyrometer voor rooktemp. Ø 60 mm. Schaal 0° - 500°C.

G.700

Coil buis-in-plyethyleenbuis zonder beschermende bus. Zuurstofverspreidende barrière-afsluiting - Model PEX.

Neutrale kleur. Voor vloerverwarming, warm en koud water distributiesystemen. Druk: 6 bar. Temperatuur: 95°C. (10 bar en 70°C). DVGW geïnspecteerd en goedgekeurd.

G.704

Coil van 100 m buis-in-polyethyleenbuis - Model PEX.

Neutrale kleur. Voor warm en koud water distributiesystemen, vloerverwarming en radiatorinstallaties. Druk: 10 bar. Temperatuur: 95°C. DVGW geïnspecteerd en goedgekeurd.

G.705

Coil van 50 m buis-in-polyethyleenbuis - Model PEX. Met verwijderbare beschermende bekleding.

Voor warm- en koud water distributiesystemen, vloerverwarming & radiatorinstallaties. Druk: 10 bar. Temperatuur: 95°C. DVGW geïnspecteerd en goedgekeurd.

G.900

Coil PEX-AL meerlaagsbuizen.

Voor warm en koud water distributiesystemen, radiatorinstallaties & vloerverwarming. Druk: 10 bar. Temperatuur: 95°C.

G.902

Coil of PEX_AL multilayer pipe with inflammable blue closed cell protective cover.

For the distribution of hor and cold water, radiator heating systems and underfloor heating. Pressure 10bar. Temperature: 95°C

G.903

Coil of pex -al multilayer pipe with inflammable red closed cell protective sleeve

For the distribution of hot and cold water, radiator heating sytems and underfloor heating. Pressure 10bar temp. 95°c

G.904

Coil of pex-al multilayer pipe with corrugated blue protective cover.

For the distribution of hot and cold water, radiator heating systems and underfloor heating. Pressure 10 bar temp. 95°C

G.905

Coil of PEX - AL multilayer pipe with corrugated red protective cover.

For the distribution of hot and cold water, radiator heating systems and underfloor heating. Pressure 10 bar temp. 95°C

G.851

Straight brass fitting with F thread end and compression end for multilayer pipe.

G.852

Straight brass fitting with M thread end and compression end for multilayer pipe

G.853

ntemediate straight brass comp. fitting for multilayer pipe.

G.854

Intermediate elbow brass compresion fitting for multilayer pipe.

G.855

Elbow brass fitting with M thread end and compression end for multilayer pipe

G.856

Elbow brass fitting with F thread end and compression end for multilayer pipe.

G.858

Elbow brass fitting with F thread end and 3 holed flange and compression end for multilayer pipe.

G.860

´T´ brass fitting with central F thread end and compression end for multilayer pipe.

G.862

Intermediate T brass compression fitting for multilayer pipe.

G.864

Brass elbow fitting with M thread end and compression end for multilayer pipe.

G.866

Reduced intermediate ´T´ brass compression fitting for multilayer pipe.

G.917

Straight brass fitting with F swivel nut and press fitting end for multilayer and polythene pipe.

Suitable for connections to manifolds; G.015-G.016-G.019-G.020-G.021-G.022-G.023-G.024-G.025-G.026-G.030-G.031-G.033.

W.001

Recht messing opschroefkoppeling verbindingsstuk.

W.003

T-tussenstuk opschroefkoppeling in messing.

W.010

Messing opschroefkoppeling met recht mannellijk uiteinde.

W.015

Messing opschroefkoppeling met recht vrouwelijk uiteinde.

W.017

Elbow in brass threaded male end.

W.023

Messing haakse opschroefoppeling 1/2´ V. met bevestigingsflens.

W.106

Recht koppelstuk voor koperbuis met borgmoer & binnendraad.

W.107

Recht koppelstuk voor koperbuis met borgmoer & binnendraad.

W.110

Recht koppelstuk voor koperbuis.

W.112

Elleboog voor koperbuis.

W.113

T voor koperbuis.

W.115

Elleboog voor koperbuis met borgmoer & buitendraad.

W.118

T voor koperbuis met centraal V. verloopstuk.

W.119

Elleboog voor koperbuis met borgmoer & binnendraad.

W.121

Hoek voor koperbuis op muurplaatje met borgmoer & binnendraad.

E.348

Pack of open rings (2) with washers (3) for fastening fitting joints assemblies with corrugated pipe CSST.

Thickness washers 1.8 mmm. Note: when buying bear in mind the use, european legislation foresees the obligation to use gas washers in NBR EN682.

E.350

Suction valve for “Multiflex” tank with pull lever and foot valve. In brass with 1 ”M connection

Aanzuig- en retourkoppelingen: diameter 8, 10, 13 of 3/8´. Lengte aanzuigslang: 2.200 mm. Met diameter 6 koppeling, klaar voor aanhechting van niveaumeter A.040.00.

E.360

Suction valve for “Multiflex” tank with pull lever and foot valve. In brass with 1 ”M connection

Aanzuig- en retourkoppelingen: diameter 8, 10, 13 of 3/8´. Lengte aanzuigslang: 2.200 mm. Met diameter 6 koppeling, klaar voor aanhechting van niveaumeter A.040.00.

E.363

Suction valve for “Multiflex” tank with pull lever and foot valve. In brass with 1 ”M connection

Aanzuig- en retourkoppelingen: diameter 8, 10, 13 of 3/8´. Lengte aanzuigslang: 2.200 mm. Met diameter 6 koppeling, klaar voor aanhechting van niveaumeter A.040.00.

E.365

Suction valve for “Multiflex” tank with pull lever and foot valve. In brass with 1 ”M connection

Aanzuig- en retourkoppelingen: diameter 8, 10, 13 of 3/8´. Lengte aanzuigslang: 2.200 mm. Met diameter 6 koppeling, klaar voor aanhechting van niveaumeter A.040.00.

G.147

M. M. Nippels in messing

G.134

3-Delige excentriekkoppeling om de aansluiting met verdeelleidingen te vergemakkelijken. (Excentriciteit 16 mm).

G.144

Dubbele of verloopdraadnippels in messing M. M. - geel of glanzend chroom, buitendraads.

V.080

Driedelige M.V. Elleboog in messing met O-ring.

V.081

Drie delige rechte M.V. koppeling in messing met O-ring.

V.082

Straight 3 piece brass fitting M.M.

U.035

V. Moer voor slang met kraag.

E.341

Coil of corrugated flexible pipe CSST (Corrugated stainless steel tubing) in stainless steel AISI 316 ´INOFLEX´ parallel spiral coils with protective yellow sheath (MDPE) suitable for gas systems, conforming with leg. EN15266. Can connect with the fittings below.

Thickness 0.3 mm Max temp. 100°C max pressure 0.5 bar.

E.346

Pack of brass nuts for the washers with corrugated tube CSST.

With the half ring and the fittings with male thread with flat seat allows you to form a joint.

G.167

Straight brass fitting between the copper tube and the corrugated steel tube.

F.664

Amalgamating protective tape for the parts of the pipe where the external sheath has been removed in order to allow joint . Regulation forsees that these parts must be covered with yellow protective tape

Width 25mm Thickness 0,5mm Length 5mt.

A.042

Coil of 50 m polyethylene capillary hose for watering systems. External Ø 6 mm - Internal Ø 4 mm - Thickness 1 mm.

E.340

Rol flexibele slang in getemperd roestvrijstaal, parallel omvlochten. Kan op maat gesneden worden E.346 - E.348 - G.147 - G.149 - G.167 - G.158. Werktemperatuur: -20°C tot +550°C.

Thickness 0.3 mm. Max temp 550°C max pressure 15 bar.

E.342

Coil of flexible tube ´INOFLEX CSST´ for solar systems. In stainless steel AISI 304 corrugated parallel spires thickness 0,3mm in defined length with isolating expanding sheath EPDM 13mm and coated with protective film against UV rays and from ware and tare with or without multiphase cable for temp. probes.

Max temp: - 40 + 150°C - presure PN 15bar.

E.345

Double coil (to and from) of flexible tube ´INOFLEX CSST´ for solar systems in stainless steel AISI 304 corrugated parallel spires thickness 0.3 mm in defined lenght with isolating expanding sheath EPDM 8 mm and coated with protective film iron UV rays and from ware and tare with multifase cable (for temp. probes).

Max temp. 40 + 150°C pressure PN 15 bar.

E.349

Suction valve for “Multiflex” tank with pull lever and foot valve. In brass with 1 ”M connection

Aanzuig- en retourkoppelingen: diameter 8, 10, 13 of 3/8´. Lengte aanzuigslang: 2.200 mm. Met diameter 6 koppeling, klaar voor aanhechting van niveaumeter A.040.00.

F.665