Antares Pipes

Z.155

Bronzen V. elleboog 90° met laskoppeling en binnendraads.

Z.040

Gebogen laskoppeling in koper, 45° M. V

Z.041

Gebogen laskoppeling in koper, 45° V.V.

D.320

D.330

N.550

Professional kit composed of a 2.5mt round plat of black glass yarn of vaious diameters and a tube of 60ml high temp. silicone. (350°C).

Suitable for use on ovens.chimmneys stoves and boilers.

F.282

- refractory sealant classified REI 180 suitable for rapid cementing, no smell for temp. upto 1100°C.

Adheres to a vast number of supports even damp concrete plaster metal wood. 500gr cartridge

F.280

- refractory adhesive suitable for temp.upto 1100°C. Immediate and solid adhesion.

Zuurstofonttrekker om buisverbindingsstukken in lood, messing, koper, ijzer en zink te solderen. Vergemakkelijkt het solderen. Verpakking van 10 stangen.

F.083

1 kg pack of stearine.

Deoxider to solder pipe joints in lead brass copper iron zinc. Makes soldering easier. Pack 10 rods.

G.134

3-Delige excentriekkoppeling om de aansluiting met verdeelleidingen te vergemakkelijken. (Excentriciteit 16 mm).

G.160

3m brass tube that can be cut and threaded according to one´s need.

M.150

5mt coil of bendable chrome plated copper tube, cut to measure for the connection of sanitary devices.

F.668

Adhesive tape in foamed reinforced rubber with black close cells and throaway protection film.

Suitable for the insulation of hot and cold pipes, in particula for the cooling production and distribution systems and for special parts that cannot be insulated with tubular pipe insulators. Thickness 3mm.

N.422

Adjustable stainless steel wall clamp.

M.118

Afvoerpijp in verchroomde messing Ø 30mm met 45° bocht. Lengte 120 x 140 mm.

M.116

Afvoerpijp in verchroomde messing.

M.115

Afvoerpijp in verchroomde messing.

N.507

Alluminium reducer neutral colour diameter from 50mm to 40mm for suction tube.

F.664

Amalgamating protective tape for the parts of the pipe where the external sheath has been removed in order to allow joint . Regulation forsees that these parts must be covered with yellow protective tape

Width 25mm Thickness 0,5mm Length 5mt.

G.166

Brass 3 piece connection fitting for tanks with drain with smooth running nut and straight spigot.

G.165

Brass 3 piece connection fitting for tanks with smooth running nut and curved spigot

G.164

Brass 3 piece connection fitting for tanks with smooth running nut and straight spigot.

G.918

Brass angle fitting 40mm high with 3 holed flange. F thread end and press fitting eng for multilayer and ployethylene pipe.

G.919

Brass angle fitting 46 mm high with 3 hole flange F thread end and brass press fitting end for multilayer and polythene pipe.

G.141

Brass cross fitting,.

G.864

Brass elbow fitting with M thread end and compression end for multilayer pipe.

G.914

Brass elbow press-fitting for multilayer pipes. Also suitable for polyethylene pipe -

G.916

Brass elbow press-fitting for multilayer pipes. with F thread end and also for polyethylene pipe

G.915

Brass elbow press-fitting fwith M thread end for multilayer and polyethylene pipe.

E.164

Brass flange for smoke pipeline with union for insertion with bolt air tight for smoke thermometer with bulb diam: 9 (Art E.165).

G.161

BRASS ROD WITH SMOOTH RUNNING THREAD.

G.163

Brass smooth running nut

G.922

Brass T press fitting with central M thread end for multilayer and polythene pipe.

G.921

Brass tee press-fitting with central F thread end for multilayer and polyethylene pipe

Z.158

Bronzen V. elleboog 90° met laskoppeling en buitendraad.

Z.153

Bronzen V. laskoppeling met binnendraad.

Z.150

Bronzen V. laskoppeling met buitendraad.

M.120

Buigbare buis in gechromeerde koper. Diameter 10 mm met gekraagd uiteinde en moer. Het tegenovergestelde uiteinde kan verbonden worden met Art. M.151, M.152, M.160, M.161, M.165.02.

M.501

Buismof voor WC verbinding naar de vloer diameter 110 mm. Gebruikt als M.V. verlengstuk om de W.C. op voet met de koppelingen op vloerhoogte te verbinden

Used as M.F. extension to connect W.C. on pedestal to fittings at floor level.

G.927

Cap for mutilayer and polythene pipe.

M.166

Chrome plated brass angle tap for under sink combined with washing machine fitting and anti reflux screw. Complete with roses.

Connection 1/2´ M. x 10 x 3/4´ M.

H.155

Coil 100 m polyethyleenslang met sproeigaatjes Ø 16 elke 300mm; Debiet 2 l/h.

R.597

Coil 5 m zachte koperbuis, Ø 6 mm voor de aansluitng van een gasoliepomp, elektroventiel & spuitstuk en voor gastoevoer naar de dagbrander.

G.700

Coil buis-in-plyethyleenbuis zonder beschermende bus. Zuurstofverspreidende barrière-afsluiting - Model PEX.

Neutrale kleur. Voor vloerverwarming, warm en koud water distributiesystemen. Druk: 6 bar. Temperatuur: 95°C. (10 bar en 70°C). DVGW geïnspecteerd en goedgekeurd.

F.086

Coil of 250g soldering wire at low temperature.

A.042

Coil of 50 m polyethylene capillary hose for watering systems. External Ø 6 mm - Internal Ø 4 mm - Thickness 1 mm.

E.341

Coil of corrugated flexible pipe CSST (Corrugated stainless steel tubing) in stainless steel AISI 316 ´INOFLEX´ parallel spiral coils with protective yellow sheath (MDPE) suitable for gas systems, conforming with leg. EN15266. Can connect with the fittings below.

Thickness 0.3 mm Max temp. 100°C max pressure 0.5 bar.

E.342

Coil of flexible tube ´INOFLEX CSST´ for solar systems. In stainless steel AISI 304 corrugated parallel spires thickness 0,3mm in defined length with isolating expanding sheath EPDM 13mm and coated with protective film against UV rays and from ware and tare with or without multiphase cable for temp. probes.

Max temp: - 40 + 150°C - presure PN 15bar.

G.905

Coil of PEX - AL multilayer pipe with corrugated red protective cover.

For the distribution of hot and cold water, radiator heating systems and underfloor heating. Pressure 10 bar temp. 95°C

G.903

Coil of pex -al multilayer pipe with inflammable red closed cell protective sleeve

For the distribution of hot and cold water, radiator heating sytems and underfloor heating. Pressure 10bar temp. 95°c

G.904

Coil of pex-al multilayer pipe with corrugated blue protective cover.

For the distribution of hot and cold water, radiator heating systems and underfloor heating. Pressure 10 bar temp. 95°C

G.902

Coil of PEX_AL multilayer pipe with inflammable blue closed cell protective cover.

For the distribution of hor and cold water, radiator heating systems and underfloor heating. Pressure 10bar. Temperature: 95°C

G.900

Coil PEX-AL meerlaagsbuizen.

Voor warm en koud water distributiesystemen, radiatorinstallaties & vloerverwarming. Druk: 10 bar. Temperatuur: 95°C.

G.704

Coil van 100 m buis-in-polyethyleenbuis - Model PEX.

Neutrale kleur. Voor warm en koud water distributiesystemen, vloerverwarming en radiatorinstallaties. Druk: 10 bar. Temperatuur: 95°C. DVGW geïnspecteerd en goedgekeurd.

G.705

Coil van 50 m buis-in-polyethyleenbuis - Model PEX. Met verwijderbare beschermende bekleding.

Voor warm- en koud water distributiesystemen, vloerverwarming & radiatorinstallaties. Druk: 10 bar. Temperatuur: 95°C. DVGW geïnspecteerd en goedgekeurd.

D.300

Compression ball valve made of PP plastic.

E.345

Double coil (to and from) of flexible tube ´INOFLEX CSST´ for solar systems in stainless steel AISI 304 corrugated parallel spires thickness 0.3 mm in defined lenght with isolating expanding sheath EPDM 8 mm and coated with protective film iron UV rays and from ware and tare with multifase cable (for temp. probes).

Max temp. 40 + 150°C pressure PN 15 bar.

V.081

Drie delige rechte M.V. koppeling in messing met O-ring.

V.080

Driedelige M.V. Elleboog in messing met O-ring.

G.144

Dubbele of verloopdraadnippels in messing M. M. - geel of glanzend chroom, buitendraads.

N.405

Elbow at 45° degrees M/F single wall for smoke shaft in black varnished stainless steel single wall thickness 0.4 mm, supplied with siliconic seal also for positive pressure.

N.406

Elbow at 90° degrees M/F single wall for smoke shaft in black varnished stainless steel single wall thickness 0.4 mm, supplied with siliconic seal also for positive pressure.

G.858

Elbow brass fitting with F thread end and 3 holed flange and compression end for multilayer pipe.

G.856

Elbow brass fitting with F thread end and compression end for multilayer pipe.

G.855

Elbow brass fitting with M thread end and compression end for multilayer pipe

D.230

Elbow female end press fitting

W.017

Elbow in brass threaded male end.

D.240

Elbow intermediate press fitting

D.270

Elbow male end press fitting

G.745

Elleboog in messing met muurplaatje & 1/2´ V. koppeling.

Z.162

Elleboog met laskoppeling in brons, met flens en binnendraad.

W.119

Elleboog voor koperbuis met borgmoer & binnendraad.

W.115

Elleboog voor koperbuis met borgmoer & buitendraad.

W.112

Elleboog voor koperbuis.

N.425

Exhaust end-unit with stainless steel protection net. To be used in case of horizontal discharge.

D.310

F threaded compression ball valve, in PP plastic

D.250

Female ´T´ press fitting

N.415

Female-female for smoke shaft, to restore male-female socketing connection, after having cut to measure a straight smoke shaft, in black varnished stainless steel single wall thickness 0.4 mm, supplied with siliconic seal also for positive pressure.

F.745

Flaring instrument for corrugated pipe for templates F.746.12 - F.746.15 and F.746.20 for diameters from 1/2´- 3/4´ e 1´.

This device facilitates the forming of flaring without having to fall back on N°3.

M.119

Flexibele afvoerbuis in kunststof, Ø 32 mm.

Dit is een verbazend praktische flexibele slang dat elk soort afvoerprobleem kan oplossen in verband met wastafels, bidets en afvoersifons. Kan eveneens gebruikt worden als vervanging van de traditionele afvoersifon. Kan op maat gesneden worden, compleet met afsluitadapters. V. wartelmoer 1 1/4´ en afvoerbuis Ø 32 mm.

M.117

Flexibele afvoerpijp in verchroomde koper.

M.130

Flexible hose in monolithic plastic that can be extended or compressed according to the form of drain taps of sinks, wash basins and bidets.

Minimum length mm 300 extendible to a maximun of 680 mm.

M.500

Flexible hose in plastic PVC extendible and compressible for the connection of WC seats.

Inlet connection diam 72/100 - outlet conn 90,100,110 Minimum length mm290 extendible to maximum 590. Structure to avoid deflection with rienforced spiral in PVC.

F.088