Antares Thermoregulation systems

Straight brass fitting with F swivel nut and press fitting end for multilayer and polythene pipe.

Suitable for connections to manifolds; G.015-G.016-G.019-G.020-G.021-G.022-G.023-G.024-G.025-G.026-G.030-G.031-G.033.

Moer in verchroomde messing voor de aansluiting van verdeelleidingen, ventielen en regel-T´s met de koperbuizen Art. V.031, V.032 en V.033.

U.007

V. Drukkoppeling in vernikkelde messing voor polyethyleenbuis.

Rechtstreeks monteerbaar op M. uitlaten van verdeelleidingen.

U.017

V. Drukkoppeling in vernikkelde messing voor meerlaagsbuizen.

Om rechtstreeks mannelijke uitlaten van de verdeelleiding met ventielen te verbinden.

G.068

– Low temperature module applicable to manifolds, even in closets,for underfloor systems with fixed point temperature setting : 20° -50°C Complete of hydraulic separator of 2m3/h with adjustable 3 way thermostatic mixing valve, high efficiency pump Alfamax RS25/60 with adjustable 6mt delivery, reset safety thermostat for stopping the pump in case of abnomalities, check valve within closing valve, 2 themostats, 1 drain cock, 1 automatic deareator and necessary pre-assembled fittings.

Connections 1´ With connections for high temperature ¾´ KV mix:3.5

G.069

- Low temperature module applicable to manifolds, even in closets,for underfloor systems prepared for regulating modulating temperature. Complete of servomotor applied to mixing valve and prepared for connection to climatic electronic control unit (Art T.101 on page..) or other make. The module is composed of: hydraulic separator of 2 m3/h, mixing valve, adjustable high efficiency pump Alfamax RS 25/60 with 6mt delivery, reset safety thermostat for stopping the pump in case of abnomalities, one

Connection 1´ With connections for high temperature ¾´

G.080

Couple stainless steel bar manifolds AISI 304 L preassembled 1”, with ¾” Euroconus with opening valves (return) and lockshield (flow) incorporated with support brackets. Complete of n.1 manual deareator, n.1 automatic deareator and n.2 drain cocks.

V.058

´BEHR THERMO TRONIK´ Elektrothermische aandrijver voor Art. V.053 en V.054.

Gemonteerd op de radiatorventielen V.053 of V.054 wordt het een zoneventiel. Het kan rechtstreeks op de radiator gemonteerd worden of op de verdeelleiding en is regelbaar vanaf een kamerthermostaat. Energieverbruik: 3 W

V.059

Electronic actuator with incorporated room thermostat and digital display for programming control of room temperature and weekly cycle.

actuator opens the valve in relation to the temperature set in program of each day of the week. Supply.3 alcaline batteries type 2AA *1,5 V. Connection valve standardised with thread

T.130

Thermostaataandrijver bestuurd vanop afstand met ballon. Capillaire lengte 2000mm. Knop in ABS. Regelbare schaal: 20°C - 60°C.

Kan gemonteerd worden met Art. V.053 en V.054

T.501

Room thermostat ´Thesis Plus´ electronic analogical for control of towel warmers, installable on the electrical resistance. With an external sensor, keeps desidered room temperature including ´Boost´ function that activates the electrical resistance to max. power for two hours. Including ´Comfort´ function ´Standby´ and ´Timer´ with which ´Boost´ functiion can be activated once or twice a day, at users request.

Complete of electric cable - adjustable temp. 7°C - 32° 230 V - 50 Hz - Protection IP11 - Dimensions: 113 x 73 x 39 mm.

T.502

Digital room cronothermostat ´Musa plus´ for control of electric towel warmers installable on electrical resistance, with large back-lit display. With an external sensor, maintaing desided constant room temperature programmed as desired. Including functions: ´Comfort´ night time reduction ´Antifreeze´ ´Chrono´ ´Timer´ and ´Standby´. // ´Comfort´ maintains desired room temperature. ´Night time reduction´ maintains a lower room temperature compared with ´Comfort´- ´Antifreeze´ mantains temperatur

Complete of electric cable - adjustable temp: 7°C - 32°C - 230 V - 50 Hz. Protection IP44 - Dimensions 113 x 73 x 39 mm.

G.230

Pre assembled compact cabinet with mixing group return and flow manifolds for radiating heating systems with thermostatic fixed point low temperature control with or without manifolds for heating components at high temperatures (towel dryers, radiators etc).

Composed of: Mixing group art G.211.10 Couple manifolds Art g.081 complete of: Connection of lockshields ¾´ euroconus Valves for the application of electtric actuators Flow regulators Automatic deareator Drain cocks Support brackets High temperature manifolds, if planned for Container cabinet Art G.174 See dimensions in table

G.235

Pre assembled compact cabinet with mixing group return and flow manifolds for radiating heating systems with thermostatic fixed point low temperature control, complete of hydraulic compensator, this allows self management of the system. Guarantee of an excellent delivery and flow with or without manifolds for heating components at high temperatures (towel dryers, radiators etc).

Composed: Mixing group art G.212.10 equipped with hydraulic compensator Couple manifolds Art g.081 complete of: Connection of lockshields ¾´ euroconus Valves for the application of electtric actuators Flow regulators Automatic deareator Drain cocks Support brackets High temperature manifolds, if planned for Container cabinet Art G.174 See dimensions in table

G.240

Pre assembled compact cabinet complete of mixing group for modulating climatic temperature control, and for manifolds for heating and cooling systems radiating panels, and other types of heating and cooling systems, adduction connections 1´F (from underneath or reversable from above).

Composed: A) Mixing group Art G.220.10 complete with 4 wat mixing valve motorized three points controllable by a climatic control unit non included. B) Couple manifolds Art g.081 complete of: Connection of lockshields ¾´ euroconus Valves for the application of electtric actuators Flow regulators Automatic deareator Drain cocks Support brackets High temperature manifolds, if planned for Container cabinet Art G.174 See dimensions in table

E.607

Basismodule bestaande uit thermostatische mengventielen voor temperatuurregulering (Art. T.133.10) geïnstalleerd op een modulair element met parallelle aanzuig- & retourkoppelingen 1 1/2´ M. boilerkant onderaan en 1 1/2´ V. wartelmoer bovenaan aan de systeemkant. Tussenafstand koppelingen: 125 mm - Hoogte: 110 mm. Compleet met een vaste aanpasbare by-pass voor boilercircuit bruikbaar wanneer de controlegroep is geïnstalleerd aan de boilerwand of op de boilercirculator. Het systeem voorkomt het

Aanpassingsschaal: 20°C - 70°C.

G.201

Suction valve for “Multiflex” tank with pull lever and foot valve. In brass with 1 ”M connection

Aanzuig- en retourkoppelingen: diameter 8, 10, 13 of 3/8´. Lengte aanzuigslang: 2.200 mm. Met diameter 6 koppeling, klaar voor aanhechting van niveaumeter A.040.00.

G.211

Compact mixing group with fixed point thermostatic temperature control, applicable to manifolds for radiating systems, adduction connections ¾´F

Composed of: Circulation pump in energy class “A”delivery 6mt Thermostatic valve with setting 20°- 50°C Balancing lockshield One way flow valve Temperature thermometer Safety thermostat with reset for stopping the circulator in case of accidental exceeding of set temperature (in respect of European legis. 2008/125/CE) Neccessary 3 piece preset fittings for connecting manifolds N.B. manifolds are not included in the price.

G.212

Compact mixing group with fixed point thermostatic temperature control, applicable to manifolds for radiating systems, complete of hydraulic compensator, this allows self management of the system. Guarantee of an excellent delivery and flow. Adduction connections 1´M

Composed of: Steel hydraulic compensator on primary circuit of boiler with flow from 3mc/h with thickness 75mm, apt to be lodged together with the manifolds in fitted cabinets – art G.173 and G.174. Circulation pump energy class “A” 6mt Thermostatic valve setting 20° - 50°C Balancing lockshield One way flow valve 2 temperature themometers Safety thermostat with reset for stopping the circulator in case of accidental exceeding of set temperature (in respect of European legis. 2008/125/CE) Neccessary 3 piece preset fittings for connecting manifolds N.B. manifolds are not included in the price.

G.216

Compact mixing group with fixed point thermostatic temperature control, applicable to manifolds for radiating systems, underneath connections (or reversable from above) adduction connections 1´

Composed of: N.B. manifolds are not included in the price. Circulation pump energy class “A” 6mt Thermostatic valve setting 20° - 50°C Balancing lockshield One way flow valve 2 temperature themometers Safety thermostat with reset for stopping the circulator in case of accidental exceeding of set temperature (in respect of European legis. 2008/125/CE) Neccessary 3 piece preset fittings for connecting manifolds

G.220

Mixing group with climatic modulating temperature control, applicable to manifolds for heating and cooling systems radiating panels, and other types of heating and cooling sysytems, underneath connections (or reversable from above) adduction connections 1´

Composed of: N.B. manifolds are not included in the price. Circulation pump energy class “A” 6mt 4 way mixing valve Servomotor opening and closing of the mixing valve predisposed for connection to control unit (our art T.101.07 or other makes). 2 temperature thermometers 2 flow control and stop valves Air vent valve Safety thermostat with reset for stopping the circulator in case of accidental exceeding of set temperature (in respect of European legis. 2008/125/CE) Neccessary 3 piece preset fittings for connecting manifolds

G.228

Connection kit for the distribution of high temperature for integrating to mixing group Art G.216.10 and G.220.10 to be junctioned with art G.067 or to any other type of manifold. Composed of 2 control valves, isolation and special various fittings for connections.

E.147

4 way thermostatic mixing valve, threaded and adjustable.

Control range. 30-60°C Indicated for temp. reduction of underfloor heating systems. Control adjustable with knob.

E.149

Thermostatic mixing valve for underfloor heating systems.

Körper aus gesandetem und verchromten Messing. Regelbereich: 20° - 50°C. Regelskala 1-5. Sehr klein, daher kann man den Mischer direkt vor den Verteilersammelleitungen einbauen, um die Temperatur der Fußbodenheizung zu senken.

E.150

Thermostatischer Mischer ´L´ in Messing für Fußbodenheizung und um die konstante Temperatur zu regulieren: 20°C-45°C

Für Anwendungen bei denen die Zugangs-/ Ausgangsrohre parallel sind.

E.154

Thermostatischer Mischer aus Messing aus 1” Antikondens für Rücklaufleitungen in den Kesseln für feste Brennstoffe. Regulierung: 45°C-75°C. Kompl. mit Thermometer.

Reguliert automatisch die Rückkehrtemperatur des Kessels (feste Brennstoffe) um sicherzustellen das die Temperatur nicht unter einem vorgegebenem Wert sinkt und erhöht die Effizienz des Kessels.

E.215

Anti condensation thermostatic valve for biomass thermal systems with prepared connections for the application of a pump. 1 1/2´M x 1 1/2´F x 1´M

Capacity 3,2CV Max pressure 10 bar - Max temp 100°C Preset valve 45°C (advisable for wood) 60°C (advisable for pellett).

T.133

Recht 3-wegsventiel in messing compleet met thermostaataandrijver (Art. T.130.70), bestuurd vanop afstand met ballon. Capillaire lengte 2000mm. Knop in ABS. Regelbare schaal: 20°C - 60°C.

T.103

3-Wegs naaldafsluiter met motoraandrijving. Mengen, onderscheppen en omleidingsfunkties. Met microbegrenzings-schakelaar. T.103.12 - T.103.20 : ARTICLE AVAILABLE ON ORDER.

Spanning 230 V - 50Hz - Looptijd: 90 sec.

T.104

3-Wegs naaldafsluiter met motoraandrijving en flens PN16. Compleet met microbegrenzingsschakelaar. ARTICLE AVAILABLE ON ORDER

Met gietijzeren huls GG25. Roestvrijstalen naald en zittingen. Schaft 32 mm. Spanning 230 VAC. Looptijd: 2´ x 15 mm. Beschermingsgraad IP44. Max. laadvermogen 150 kg. Voor verbindingsflenzen zie Art. V.151

G.133

V.M. Messing koppeling voor dompeltemperatuurmeethuls of voeler. Met of zonder thermometer art. E. 078.

Sheath type: length 30 mm. - internal Ø 9 mm.

T.126

ELECTRONIC UNIT FOR TEMP CONTROL IN FIREPLACE BACKBOILERS.

Detects the temperature with a sensor and controls the circulation pump. Audible alarm for temperatures over 90°C that works also if in FF position. GRILL switch. Anti-freeze protection with automatic start-up of the pump. Comes with cover and sensor. Supply:230V ~ 15%..60 Hz. Contacts 5A - 250 V ~ Temperature control: 30°÷90°C. Intervention differential ~ 1.5°C. Sensor type NTC. Temperature display: 20°C÷90°C. Protection grade IP30. With plastic casing for wall-mounting.

T.128

Elektrische digitale besturingseenheid ´STAR´ voor de controle en aanpassing van open haard achterboilers compleet met sensor.

Geeignet zur Installation in 3 Modul DIN Einlassgehäusen. Ausgestattet mit Software zur Kontrolle und Verwaltung der von den Sonden übermittelten Signale. Reguliert automatisch die Geschwindigkeit der Pumpen je nach Wassertemperatur im Thermokamin. Ausgestattet mit Display zur Temperatur- und Funktionsanzeige. Ausgestattet mit Lichtsignalen die die verschiedenen Stadien der Funktionen anzeigen. Mit visuellem und akustischem Alarm bei auftretenden Anomalien. = = = Das Steuereinheit verfügt über verschiedene integrierte Funktionsprogramme, die vom Menü aus wählbar sind. So lässt sich das Gerät an die unterschiedlichen Typologien der vorhandenen Anlage anpassen. Dank der Relax-Funktion erhält man ausschliesslich warmes Sanitärwasser, wobei die Heizung momentan ausgeschlossen bleibt. Merkmale und Ausstattung: - Eingang Wassersonde, Temperaturbereich 30-99°C - Eingang NO ( normal offen) für Druckflusswächter - Relais-Ausgang 220 Volt für Kreislaufpumpe 1 - Relais-Ausgang 220 Volt NO und NC für Elektroventil - Relais-Ausgang mit freien Hilfsschalter AUX - Relais-Ausgang 220 Volt für Kreislaufpumpe 2 oder Grill - 3 Din Module in eigebautem Gehäuse

T.134

T.138

3-way valve with locking rod in stainless steel with 4 mm vertical stroke. - Connection for actuator 30 x 1.5

Can be combined with thermostatic actuators art. T.130.70 and electrical actuators art. V.058, connection 30 x 1.5.

T.143

Straight brass valve 3 way complete with electromechanical actuators (V.058) with limit stop microswitch. Max working temp 110°C

T.144

3-way valve with 4 conn. for fan coil ½´ M. x ½´ M. x ½´ M. x ½´ M in brass complete with electromechanical actuator ( V.058) can be used as diverter valve/mixing. Working temp 110°C. 24 V.

C.051

Thermostatic mixer for the distribution on systems for domestic water. Temp. Max:85°C

C.053

Thermostatic mixer for hot water distribution systems, with extractable cartridge, filter and chrome plated knob with blocking switch.

Control range 20° / 65°C.

C.055

Thermostatic mixer to fit in wall for shower box with d.46 rose and blocking switch and non return valve.

Connections :1/2´M x 1/2´M x 172´F. Flow rate lt/min. 3bar:29.

C.056

Sicherheitsvorkehrung Antiverbrennung in verchromtes Messing. ½“ IG x ½“ AGVerhindert die .

Unfallgefahr von Verbrennungen durch zu warmes Wasser. Leistung lt/min. 3 bar: 29

C.060

Threaded thermostatic mixer for centralized hot water systems.

Bronze body. Max pressure 100 bar Minimum flow 34l/min Control range 38-55°C Conn.F

C.065

Thermostatischer Mischer für Solaranlagen mit Verteilung von Warmwasser mit hohen Temperaturen bis 100°C. Regulierung: 30°C - 65°C. Mit eingebautem Reserveventilù

Entwickelt für Solaranlagen für sehr hohe Temperaturen um die 100°C

C.067

Automatisches thermostat. Verteilerventil für Sanitärwasseranlagen des Solarspeichers zum Kesse der kontrolliert, sollte die Temperatur unter 45°C sinken.

Festeinstellung bei 45°C - Höchsttemperatur max 100°C.

C.069

Regulier Kit für Solaranlagen. Zusammengesetzt aus Umleitungsventil (Art. C.067) und Mischventil (Art. C.065). Temperaturregler 30-65°C.

Designed for solar thermal heating to divert fluid path according to the instant temperature and supply an adeguate adjustment of use. Connections with fittings 3 pieces M. on valves and output M. Pre set to 45°C.

U.035

V. Moer voor slang met kraag.

T.098

Suction valve for “Multiflex” tank with pull lever and foot valve. In brass with 1 ”M connection

Aanzuig- en retourkoppelingen: diameter 8, 10, 13 of 3/8´. Lengte aanzuigslang: 2.200 mm. Met diameter 6 koppeling, klaar voor aanhechting van niveaumeter A.040.00.

T.102

2-Wegs kogelkraan met motoraandrijving volle doorlaat comform DIN standaard 3537.

Spanning: 230V - 50Hz. Met microbegrenzingsschakelaar 5A. Werkdruk 10 bar. Bescherming IP40.

Om prijzen te bekijken log in

Thermoregulation systems

CONTACTEN

Italia

ANTARES for Water & Fire Srl

OVER ONS