Antares Thermoregulation systems

- Low temperature module applicable to manifolds for underfloor systems prepared for the control of modulating temperature with the application of a servomotor and the electronic control device (Art T.109.00 + T.101) on page with 3 way mixing valve, adjustable high efficiency circulating pump 6mt delivery “AlfaMax” RS 25/60, reset safety thermostat for stopping the pump in case of abnormalities, integrated check valve, 2 ball valves with 1 thermometer on boiler side and 2

G.069

- Low temperature module applicable to manifolds, even in closets,for underfloor systems prepared for regulating modulating temperature. Complete of servomotor applied to mixing valve and prepared for connection to climatic electronic control unit (Art T.101 on page..) or other make. The module is composed of: hydraulic separator of 2 m3/h, mixing valve, adjustable high efficiency pump Alfamax RS 25/60 with 6mt delivery, reset safety thermostat for stopping the pump in case of abnomalities, one

Connection 1´ With connections for high temperature ¾´

T.137

2-way valve with locking rod in stainless steel with 4 mm vertical stroke. - Connection for actuator 30 x 1.5

Can be combined with thermostatic actuators art. T.130.70 and electrical actuators art. V.058, connection 30 x 1.5.

T.102

2-Wegs kogelkraan met motoraandrijving volle doorlaat comform DIN standaard 3537.

Spanning: 230V - 50Hz. Met microbegrenzingsschakelaar 5A. Werkdruk 10 bar. Bescherming IP40.

T.144

3-way valve with 4 conn. for fan coil ½´ M. x ½´ M. x ½´ M. x ½´ M in brass complete with electromechanical actuator ( V.058) can be used as diverter valve/mixing. Working temp 110°C. 24 V.

T.138

3-way valve with locking rod in stainless steel with 4 mm vertical stroke. - Connection for actuator 30 x 1.5

Can be combined with thermostatic actuators art. T.130.70 and electrical actuators art. V.058, connection 30 x 1.5.

E.141

3-Wegs draadmengventiel in gietijzer. V. koppelingen.

E.144

3-Wegs gietijzeren mengventiel met flens.

For the connection counter flanges see models PN6 - UNI 2253 and UNI 2276

T.104

3-Wegs naaldafsluiter met motoraandrijving en flens PN16. Compleet met microbegrenzingsschakelaar. ARTICLE AVAILABLE ON ORDER

Met gietijzeren huls GG25. Roestvrijstalen naald en zittingen. Schaft 32 mm. Spanning 230 VAC. Looptijd: 2´ x 15 mm. Beschermingsgraad IP44. Max. laadvermogen 150 kg. Voor verbindingsflenzen zie Art. V.151

T.103

3-Wegs naaldafsluiter met motoraandrijving. Mengen, onderscheppen en omleidingsfunkties. Met microbegrenzings-schakelaar. T.103.12 - T.103.20 : ARTICLE AVAILABLE ON ORDER.

Spanning 230 V - 50Hz - Looptijd: 90 sec.

E.147

4 way thermostatic mixing valve, threaded and adjustable.

Control range. 30-60°C Indicated for temp. reduction of underfloor heating systems. Control adjustable with knob.

E.140

4-Wegs kruisvormig draadmengventiel in gietijzer F.

E.142

4-Wegs kruisvormig mengventiel in gietijzer met flens. Zware uitvoering.

For the connection counter flanges see models PN6 -UNI 2253 and UNI 2276.

E.614

4-Wegs kruisvormig mengventiel in gietijzer. Parallelle koppeling 1 1/2´ M. x 1 1/2´ V. wartelmoer.

Kan geïnstalleerd worden op boilerverbindingsstuk onderaan & systeemverbindingsstuk bovenaan.

P.002

Anschlußverschraubung aus Messing mit eingebautem Rückschlagventil.

Diese wird benutzt, um eine einzige Fließrichtung von der Flüssigkeit im Kreislauf zu garantieren und Verunreinigungen am Anlageneingang vorzubeugen.

E.215

Anti condensation thermostatic valve for biomass thermal systems with prepared connections for the application of a pump. 1 1/2´M x 1 1/2´F x 1´M

Capacity 3,2CV Max pressure 10 bar - Max temp 100°C Preset valve 45°C (advisable for wood) 60°C (advisable for pellett).

E.628

Anticondensation module for heat generators on solid fuel feed with motorized mixing valve, high efficiency adjustable circulating pump ´Modulex Hybrid´ 6mt delivery, 2 ball valves with thermometer, check valve, alignment spacer and isolating shell

E.627

Anticondensation preassembled module for heat generators on solid fuel feed, with thermostatic assembly

Complete of circulating pump energy class A ´Modulex Hybrid´ with 6mt delivery, anticondensation by-pass, interception valve, thermometer and check valve, wall fixing brackets. Complete of isolating shell.. Model DN 25 for power upto 32 KW: Connection 1´ - Flow KV: 3,2.

R.102

Apparaat met motor ´MUT´ zoneventiel zonder lichaam in messing. 230 V - 50 Hz .

C.067

Automatisches thermostat. Verteilerventil für Sanitärwasseranlagen des Solarspeichers zum Kesse der kontrolliert, sollte die Temperatur unter 45°C sinken.

Festeinstellung bei 45°C - Höchsttemperatur max 100°C.

E.607

Basismodule bestaande uit thermostatische mengventielen voor temperatuurregulering (Art. T.133.10) geïnstalleerd op een modulair element met parallelle aanzuig- & retourkoppelingen 1 1/2´ M. boilerkant onderaan en 1 1/2´ V. wartelmoer bovenaan aan de systeemkant. Tussenafstand koppelingen: 125 mm - Hoogte: 110 mm. Compleet met een vaste aanpasbare by-pass voor boilercircuit bruikbaar wanneer de controlegroep is geïnstalleerd aan de boilerwand of op de boilercirculator. Het systeem voorkomt het

Aanpassingsschaal: 20°C - 70°C.

G.864

Brass elbow fitting with M thread end and compression end for multilayer pipe.

R.143

Brass immersion pockets for probes 1/2´M. With plug for plastic cables Ø 6-8 mm.

Internal diemeter: 9mm.

G.183

Brass joint consisting of swivel metal sleeves and spigot.

T.080

Brass motorized zone valves ´HOTWELL´ 230V - 50Hz

Normally closed, in the absence of voltage it returns to closed. Equipped with lever for manual opening.

E.143

Brass three way mixing valve with by-pass pump conn. 1 1/2´F Flow kv10.

Connections: 1 1/2´ F. sw. x 1 1/2´M. x 1´ M. Motorized with servomotor Art- T.109.00.

T.004

CO carbon monoxide detector with thermostat for detecting abnormal temperature increases caused by fires.

Dimensions: 115 x 85 x 35 h - Power supply: 230 Vac. CO detector functions: detection scale 0 ÷ 5,000 ppm with output relay for any fan or alarm siren. Thermometer functions: temperature measurement 0 - 40 ° C

G.211

Compact mixing group with fixed point thermostatic temperature control, applicable to manifolds for radiating systems, adduction connections ¾´F

Composed of: Circulation pump in energy class “A”delivery 6mt Thermostatic valve with setting 20°- 50°C Balancing lockshield One way flow valve Temperature thermometer Safety thermostat with reset for stopping the circulator in case of accidental exceeding of set temperature (in respect of European legis. 2008/125/CE) Neccessary 3 piece preset fittings for connecting manifolds N.B. manifolds are not included in the price.

G.212

Compact mixing group with fixed point thermostatic temperature control, applicable to manifolds for radiating systems, complete of hydraulic compensator, this allows self management of the system. Guarantee of an excellent delivery and flow. Adduction connections 1´M

Composed of: Steel hydraulic compensator on primary circuit of boiler with flow from 3mc/h with thickness 75mm, apt to be lodged together with the manifolds in fitted cabinets – art G.173 and G.174. Circulation pump energy class “A” 6mt Thermostatic valve setting 20° - 50°C Balancing lockshield One way flow valve 2 temperature themometers Safety thermostat with reset for stopping the circulator in case of accidental exceeding of set temperature (in respect of European legis. 2008/125/CE) Neccessary 3 piece preset fittings for connecting manifolds N.B. manifolds are not included in the price.

G.216

Compact mixing group with fixed point thermostatic temperature control, applicable to manifolds for radiating systems, underneath connections (or reversable from above) adduction connections 1´

Composed of: N.B. manifolds are not included in the price. Circulation pump energy class “A” 6mt Thermostatic valve setting 20° - 50°C Balancing lockshield One way flow valve 2 temperature themometers Safety thermostat with reset for stopping the circulator in case of accidental exceeding of set temperature (in respect of European legis. 2008/125/CE) Neccessary 3 piece preset fittings for connecting manifolds

G.228

Connection kit for the distribution of high temperature for integrating to mixing group Art G.216.10 and G.220.10 to be junctioned with art G.067 or to any other type of manifold. Composed of 2 control valves, isolation and special various fittings for connections.

G.080

Couple stainless steel bar manifolds AISI 304 L preassembled 1”, with ¾” Euroconus with opening valves (return) and lockshield (flow) incorporated with support brackets. Complete of n.1 manual deareator, n.1 automatic deareator and n.2 drain cocks.

T.067

Digitale elektronische tijdschakelaar met reserve-autonomie voor paneelmontage op DIN staaf voor module van 35 mm.

Dag en weekprogramma´s. Programma interval: 1 minuut. On/off lampje en elektrische golffilter. Met schakelaar ON-AUTO-OFF. Voeding: 230 VAC. Contacten: 16A.

T.068

Digitale elektronische tijdschakelaar met reserve-autonomie met SCHUKO plug.

Afmetingen mm: 70 x 70 x 40. Dag- en weekprogramma´s. Programma interval: 1 minuut. Met elektrische golffilter. Met enkel uitgangskanaal. Voeding: 230 VAC. Contacten: 16A.

R.140

Dompelmeethulzen voor thermostaten & thermometers.

G.858

Elbow brass fitting with F thread end and 3 holed flange and compression end for multilayer pipe.

G.856

Elbow brass fitting with F thread end and compression end for multilayer pipe.

G.855

Elbow brass fitting with M thread end and compression end for multilayer pipe

V.059

Electronic actuator with incorporated room thermostat and digital display for programming control of room temperature and weekly cycle.

actuator opens the valve in relation to the temperature set in program of each day of the week. Supply.3 alcaline batteries type 2AA *1,5 V. Connection valve standardised with thread

H.100

Electronic programmer with liquid crystal display, double irrigation and interative programm.

Technical data: Irrigation time from 1 min to 8 hours (1 min increment) Flexible scheduling: - Daily - Weekly - Even / odd day watering - Irrigation at intervals of 1 to 30 days Activation / Deactivation of the rain sensor Input power: - 220 VAC - (0.625 A) Output power: - Maximum per station: 24 VAC- (0.25 A) - Maximum for total (including MV control: 24 VAC- (0.625 A) Operating temperature: -10 ° to 60 ° C

B.054

Elektroventiel voor gas, normaal gesloten met manuele reset. B.054.65-B.054.80 ARTICLE AVAILABLE ON ORDER.

230 V - 50 Hz. Sluit mechanisch af in geval van afwezigheid van netstroom. Dit ventiel is geïnstalleerd in combinatie met Art. B.050 en B.052.00. Resetten van elektroventiel moet manueel uitgevoerd worden. Max. werkdruk 500 mbar.

B.055

Elektroventiel voor gas, normaal open met manuele reset. B.055.65-B.055.80 ARTICLE AVAILABLE ON ORDER.

230 V - 50 Hz. Sluit mechanisch af bij het ontvangen van een elektrisch impuls. Kan geïnstalleerd worden in combinatie met Art. B.052.00 & Art. B.050. Max. druk 500 mbar.

B.056

Elektroventielconnector volgens DIN 43650 standaard.

For solenoid valves Art. H.500 or coils Art. H.501

B.057

Gas solenoid valve normally open manual reset

Supply 9-12 Vdc – Max. pressure: 1.000 mbar. Receiving an electtric impulse from the gas detector, the solenoid valve closes.The installation of this solenoid valve can be matched directly with detector B.038.00 with the independant power line (stand alone) with detectors B.045 - B.050 - B.051 - B.052.

R.144

Immersion pockets for temp.probes with fixing compression fitting capsule from Ø 8 mm - With plug for plastic cables Ø 6-8 mm.

T.073

Inbouw digitale elektronische tijdschakelaar 62mm met reserve-autonomie voor bevestiging aan boilers en andere toepassingen voor huisgebruik.

Dag- en weekprogramma´s. Programma interval: 1 minuut. On/off lampje en elektrische golffilter. Met schakelaar: ON-AUTO-OFF. Voeding: 230 VAC. Contacten: 16A.

T.071

Inbouw mechanische tijdsklok met dagprogramma - Ø 62 - Sector programmering. Mogelijke intervallen 15 min. 16A.

Kan geïnstalleerd worden op nieuwe boilers of als vervanging (Riello, Beretta, Sinat enz.)

T.060

Inbouw tijdmeter - 230 V - 50Hz - 5 cijfers & decimalen.

Afmetingen mm: 45 x 45 x 33.

G.854

Intermediate elbow brass compresion fitting for multilayer pipe.

G.862

Intermediate T brass compression fitting for multilayer pipe.

E.621

Invertable relaunch assembly DN25, composed of 2 ball valves with thermometer and one way valve, high efficency adjustable circulation pump ´Modulex Hybrid´ 6mt delivery, alignment spacer and ball valve with screw-driver adjustment for eventual substitution of pump and isolation shell.

* For power up to 50 KW: predispoded for insertion of by-pass valve for eventual over pump pressure (Art. P.301.03).

E.630

Invertable relaunch module DN 32 composed of 2 ball valves with thermometer and integrated one way valve, high efficiency adjustable circulating pump ´Modulex Hybrid´ with 6mt delivery, ball valve for eventual substitution of pump and isolating shell. Suitable for power upto 125 KW - Connections: 11/4´M and 11/2´ with largening rings included.

G.070

lLow temp. module for underfloor heating system manifolds. Complete with thermostatic valve (control range 20° ÷ 50°C) adjustable circulation pump with 6mt delivery head, safety thermostat with manual reset for the turning off of the circulator if there is a fault, a thermometer, drain cock, automatic deaerator and premounted fittings.

G.074

Low temperature module applicable to manifolds for underfloor systems with fixed point temperature control complete 20° - 50°C, with 3 way adjustable thermostatic mixing valve, adjustable high efficiency circulating pump 6mt delivery “AlfaMax” RS 25/60, reset safety thermostat for stopping the pump in case of abnormalities, integrated check valve, 2 ball valves with 1 thermometer on boiler side and 2 thermometers on manifold side, 1 drain cock, 1 automatic deareator, and necessary pre-assembled

Aanpassingsschaal: 20°C - 70°C.

G.220

Mixing group with climatic modulating temperature control, applicable to manifolds for heating and cooling systems radiating panels, and other types of heating and cooling sysytems, underneath connections (or reversable from above) adduction connections 1´

Composed of: N.B. manifolds are not included in the price. Circulation pump energy class “A” 6mt 4 way mixing valve Servomotor opening and closing of the mixing valve predisposed for connection to control unit (our art T.101.07 or other makes). 2 temperature thermometers 2 flow control and stop valves Air vent valve Safety thermostat with reset for stopping the circulator in case of accidental exceeding of set temperature (in respect of European legis. 2008/125/CE) Neccessary 3 piece preset fittings for connecting manifolds

E.631

Module bestaande uit 2 kogelkranen met verb. (Art. E.430.10), een mengventiel (Art. E.614.12) met parallel aanvoer- en retourkoppeling 1 1/2´ M. aan de boilerkant, circulatiepomp (Art. P.064), 2 kogelkranen (Art. E.608.10) met 2 thermometers, 1 controleventiel. Uitgangverloopstuk 1´ V. Ingang verb. 1´ M. Tussenafstand uitgangen 125 mm.

Dit model kan eveneens gecombineerd worden met een apparaat dat overdruk voorkomt (Art. E.615.10).

E.624

Module DN25 for lowering and regulating modulating temperature with separate electronic apparatus (see art. T101). Suitable for systems with high and low temperature (radiators and panels) composed of 2 ball valves with thermometer and one way valve, high efficiency adjustable circulating pump ´Modulex Hybrid´ 6mt delivery, 3 way motorized mixing valve with by-pass, alignment spacer, and ball valve screw-drive adjustable for eventual substitution of pump, safety thermostat manual rest for stoppi

Predisposed for insertion of by-pass valve for eventual over pump pressure for power up to 38 KW (Art P.301.03) ** For servomotor characteristics see art. T.109.

E.623

Module DN25 for lowering and regulating thermostatic temperature at fixed point of : 30° - 60°C for systems with radiant panelscomposed of 2 ball valves with thermometer and one way valve, high efficiency adjustable circulating pump ´Modulex Hybrid´ 6mt delivery, 3 way thermostatic valve, alignment spacer, and ball valve screw-driver adjustable for eventual substitution of pump, safety thermostat manual reset for stopping pump in case of abnormalities and isolating shell.

* predisposed for insertion of by-pass valve for eventual over pump pressure (Art P.301.03).

U.006

Moer in verchroomde messing voor de aansluiting van verdeelleidingen, ventielen en regel-T´s met de koperbuizen Art. V.031, V.032 en V.033.

G.853

ntemediate straight brass comp. fitting for multilayer pipe.

G.240

Pre assembled compact cabinet complete of mixing group for modulating climatic temperature control, and for manifolds for heating and cooling systems radiating panels, and other types of heating and cooling systems, adduction connections 1´F (from underneath or reversable from above).

Composed: A) Mixing group Art G.220.10 complete with 4 wat mixing valve motorized three points controllable by a climatic control unit non included. B) Couple manifolds Art g.081 complete of: Connection of lockshields ¾´ euroconus Valves for the application of electtric actuators Flow regulators Automatic deareator Drain cocks Support brackets High temperature manifolds, if planned for Container cabinet Art G.174 See dimensions in table

G.230

Pre assembled compact cabinet with mixing group return and flow manifolds for radiating heating systems with thermostatic fixed point low temperature control with or without manifolds for heating components at high temperatures (towel dryers, radiators etc).

Composed of: Mixing group art G.211.10 Couple manifolds Art g.081 complete of: Connection of lockshields ¾´ euroconus Valves for the application of electtric actuators Flow regulators Automatic deareator Drain cocks Support brackets High temperature manifolds, if planned for Container cabinet Art G.174 See dimensions in table

G.235

Pre assembled compact cabinet with mixing group return and flow manifolds for radiating heating systems with thermostatic fixed point low temperature control, complete of hydraulic compensator, this allows self management of the system. Guarantee of an excellent delivery and flow with or without manifolds for heating components at high temperatures (towel dryers, radiators etc).

Composed: Mixing group art G.212.10 equipped with hydraulic compensator Couple manifolds Art g.081 complete of: Connection of lockshields ¾´ euroconus Valves for the application of electtric actuators Flow regulators Automatic deareator Drain cocks Support brackets High temperature manifolds, if planned for Container cabinet Art G.174 See dimensions in table

T.076

Programmeerbare mechanische tijdsklok voor modularie omlijstingen met reserve-autonomie.

Dimensions: 54 x 88.5 mm. - Daily programming in sectors, with intervals of 15 min. 16A switching contacts.

T.070

Programmeerbare mechanische tijdsklok.

Afmetingen 72 x 72 mm - Sectorprogrammering - 16A schakelaarcontacten.

T.132

Recht 2-wegsventiel in messing compleet met thermostaat- aandrijver (Art. T.130.70), bestuurd vanop afstand met ballon. Capillaire lengte 2000mm. Knop in ABS. Regelbare schaal: 20°C - 60°C.

T.133

Recht 3-wegsventiel in messing compleet met thermostaataandrijver (Art. T.130.70), bestuurd vanop afstand met ballon. Capillaire lengte 2000mm. Knop in ABS. Regelbare schaal: 20°C - 60°C.

T.131

Recht ventiel in vernikkelde messing compleet met thermostatische aandrijver (Art. T.130.70), afstandsgecontroleerde bol met capillaire lengte 2000 mm. Knop in ABS. Regelbare schaal: 20°C - 60°C.

G.866

Reduced intermediate ´T´ brass compression fitting for multilayer pipe.

C.069

Regulier Kit für Solaranlagen. Zusammengesetzt aus Umleitungsventil (Art. C.067) und Mischventil (Art. C.065). Temperaturregler 30-65°C.

Designed for solar thermal heating to divert fluid path according to the instant temperature and supply an adeguate adjustment of use. Connections with fittings 3 pieces M. on valves and output M. Pre set to 45°C.

C.056

Sicherheitsvorkehrung Antiverbrennung in verchromtes Messing. ½“ IG x ½“ AGVerhindert die .

Unfallgefahr von Verbrennungen durch zu warmes Wasser. Leistung lt/min. 3 bar: 29

G.917

Straight brass fitting with F swivel nut and press fitting end for multilayer and polythene pipe.

Suitable for connections to manifolds; G.015-G.016-G.019-G.020-G.021-G.022-G.023-G.024-G.025-G.026-G.030-G.031-G.033.

G.851

Straight brass fitting with F thread end and compression end for multilayer pipe.

G.852

Straight brass fitting with M thread end and compression end for multilayer pipe

T.142

Straight brass valve 2 way complete with electromechanical actuators (V.058) with limit stop microswitch. Max working temp 110°C

T.143

Straight brass valve 3 way complete with electromechanical actuators (V.058) with limit stop microswitch. Max working temp 110°C

T.141

Straight valve in nickle plated brass complete with electro mechanical actuator (V.058) controlled by a room stat. Working temp. max 110°C

E.611