Antares Thermoregulation systems

Brass joint consisting of swivel metal sleeves and spigot.

Anschlußverschraubung aus Messing mit eingebautem Rückschlagventil.

Diese wird benutzt, um eine einzige Fließrichtung von der Flüssigkeit im Kreislauf zu garantieren und Verunreinigungen am Anlageneingang vorzubeugen.

P.003

– Plastic check valve internal insertment, equipped with steel spring for circular hold and o-ring.

B.054

Elektroventiel voor gas, normaal gesloten met manuele reset. B.054.65-B.054.80 ARTICLE AVAILABLE ON ORDER.

230 V - 50 Hz. Sluit mechanisch af in geval van afwezigheid van netstroom. Dit ventiel is geïnstalleerd in combinatie met Art. B.050 en B.052.00. Resetten van elektroventiel moet manueel uitgevoerd worden. Max. werkdruk 500 mbar.

B.055

Elektroventiel voor gas, normaal open met manuele reset. B.055.65-B.055.80 ARTICLE AVAILABLE ON ORDER.

230 V - 50 Hz. Sluit mechanisch af bij het ontvangen van een elektrisch impuls. Kan geïnstalleerd worden in combinatie met Art. B.052.00 & Art. B.050. Max. druk 500 mbar.

B.057

Gas solenoid valve normally open manual reset

Supply 9-12 Vdc – Max. pressure: 1.000 mbar. Receiving an electtric impulse from the gas detector, the solenoid valve closes.The installation of this solenoid valve can be matched directly with detector B.038.00 with the independant power line (stand alone) with detectors B.045 - B.050 - B.051 - B.052.

B.056

Elektroventielconnector volgens DIN 43650 standaard.

For solenoid valves Art. H.500 or coils Art. H.501

T.223

Temperature probe normally used for floor heating systems. Complete with 3 mt. of cable. Can be connected to thermostats Art T.420 It can also be used to measure the temperature of the pipes, room temperature and outside temperatures.

Type NTC 25° = 10K - Diameter 7 mm. Control: -9,5°C / 99,5°C

T.210

Temperature probe for solar panels Pt 1000Cl. B EN60751.

Sensor in steel tube 6x50mm- Grey silicon cable Length . 1000mm – pre insulated tips. Temperature range -50/+180°C

T.224

Suction valve for “Multiflex” tank with pull lever and foot valve. In brass with 1 ”M connection

Aanzuig- en retourkoppelingen: diameter 8, 10, 13 of 3/8´. Lengte aanzuigslang: 2.200 mm. Met diameter 6 koppeling, klaar voor aanhechting van niveaumeter A.040.00.

E.611

Suction valve for “Multiflex” tank with pull lever and foot valve. In brass with 1 ”M connection

Aanzuig- en retourkoppelingen: diameter 8, 10, 13 of 3/8´. Lengte aanzuigslang: 2.200 mm. Met diameter 6 koppeling, klaar voor aanhechting van niveaumeter A.040.00.

R.140

Dompelmeethulzen voor thermostaten & thermometers.

R.141

Verpakking van 20 frictieveren voor dompelthermostaat- meethuls. Lengte 100 mm. Voor gat Ø 15 mm. Gepolijst staal.

R.142

Verpakking van 10 veren in staal voor bevestiging van het capillair aan de thermostaten. Gepolijst staal.

R.143

Brass immersion pockets for probes 1/2´M. With plug for plastic cables Ø 6-8 mm.

Internal diemeter: 9mm.

R.144

Immersion pockets for temp.probes with fixing compression fitting capsule from Ø 8 mm - With plug for plastic cables Ø 6-8 mm.

R.102

Apparaat met motor ´MUT´ zoneventiel zonder lichaam in messing. 230 V - 50 Hz .

R.104

Three way diverter valve and ´MUT´ piston.

T.080

Brass motorized zone valves ´HOTWELL´ 230V - 50Hz

Normally closed, in the absence of voltage it returns to closed. Equipped with lever for manual opening.

T.092

´MUT´ zoneventiel met motoraandrijving in messing. Voeding 230V 50Hz.

Normaal gesloten. Ingeval er geen stroom is, sluit het zich weer. Wordt geleverd met hendel voor manuele opening. Voor microbegrenzingsschakelaar zie Art. T.093.00.

T.071

Inbouw mechanische tijdsklok met dagprogramma - Ø 62 - Sector programmering. Mogelijke intervallen 15 min. 16A.

Kan geïnstalleerd worden op nieuwe boilers of als vervanging (Riello, Beretta, Sinat enz.)

E.621

Invertable relaunch assembly DN25, composed of 2 ball valves with thermometer and one way valve, high efficency adjustable circulation pump ´Modulex Hybrid´ 6mt delivery, alignment spacer and ball valve with screw-driver adjustment for eventual substitution of pump and isolation shell.

* For power up to 50 KW: predispoded for insertion of by-pass valve for eventual over pump pressure (Art. P.301.03).

E.623

Module DN25 for lowering and regulating thermostatic temperature at fixed point of : 30° - 60°C for systems with radiant panelscomposed of 2 ball valves with thermometer and one way valve, high efficiency adjustable circulating pump ´Modulex Hybrid´ 6mt delivery, 3 way thermostatic valve, alignment spacer, and ball valve screw-driver adjustable for eventual substitution of pump, safety thermostat manual reset for stopping pump in case of abnormalities and isolating shell.

* predisposed for insertion of by-pass valve for eventual over pump pressure (Art P.301.03).

E.624

Module DN25 for lowering and regulating modulating temperature with separate electronic apparatus (see art. T101). Suitable for systems with high and low temperature (radiators and panels) composed of 2 ball valves with thermometer and one way valve, high efficiency adjustable circulating pump ´Modulex Hybrid´ 6mt delivery, 3 way motorized mixing valve with by-pass, alignment spacer, and ball valve screw-drive adjustable for eventual substitution of pump, safety thermostat manual rest for stoppi

Predisposed for insertion of by-pass valve for eventual over pump pressure for power up to 38 KW (Art P.301.03) ** For servomotor characteristics see art. T.109.

Om prijzen te bekijken log in

Thermoregulation systems

CONTACTEN

Italia

ANTARES for Water & Fire Srl

OVER ONS