Thermocouple length: 280 mm. - Without the thermostat - For the thermostat see Art. R.198

Electrical interception connection - Faston M.

Length of sensitive element section: 1,200 mm. Length of valve connection section: 1,100 mm.

Lenght of thermocouple: 280 mm. Without the thermostat - To see the thermostat art. R.198.

Length of thermocouple: 500 mm - Length of splitwire to first thermostat: 380 mm, to second thermostat: 650 mm. Unified head - Connection 11/32´.

Thermocouple length: 250 mm - Intercepting wire: 720 mm - Special connection nut Ø 6 - 6,5x77 . Fitting M 8x1.

With joint fixing coupler M10 x 1M with milled double cone. With coupler at the valve: 11/32´ (ASA) - M9x1 - M10x1. With lugs for connection to the thermostat: 2 faston 6.3 x 0.8. 2 eyelet terminals diam 3.7. Suitable for substitution of multiple devices.

Suitable not only for ´Honeywell´ pilot burners but also for the majority of other manufacturers (boilers, water heaters, radiators, ovens, etc.): Robertshaw - Sit -White Rogers - Worcester - Control Co. CC/AP - General Control.

N.B.: Usually the power-unit nut 11/32´ (ASA) is used for the following valves: Honeywell - Worcester - White Rogers - Robertshaw.

Threaded M. connection 6 x 0.75 c/w M. connection 11 x 1 for Honeywell Model Q 385 A. Connection nut 11/32´ (ASA) Length 900 mm.

With ´VILL´ junction end and nut M. 8 x 1 - Length ´L´ 400 mm.

This device allows for the controlling of the perfomance and condition of all types of thermocouples for boilers and gas cookers. It works without external current supply and is suitable also for intercepted thermocouples. Complete with milled adaptor for different threading and alligator clips to allow for the testing of all types of thermocouples.

C/w necessary fittings to connect thermocouple to pilot flame & following gas valves: Junkers - Sit - Catoba - Honeywell - Control - White Rogers.