Antares Thermocouples

Universal thermocouple tester for gas boilers ´TESTELEMENT´.

This device allows for the controlling of the perfomance and condition of all types of thermocouples for boilers and gas cookers. It works without external current supply and is suitable also for intercepted thermocouples. Complete with milled adaptor for different threading and alligator clips to allow for the testing of all types of thermocouples.

R.501

Thermocouple for combination gas control with standard junction end and power-unit nut 11/32´ (ASA).

N.B.: Usually the power-unit nut 11/32´ (ASA) is used for the following valves: Honeywell - Worcester - White Rogers - Robertshaw.

R.502

Thermocouple for combination gas control with standard junction end (SIT).

R.503

Thermocouple for combination gas control (domestic electric appliances like: ovens, heaters, etc) with threaded junction end M. 8 x 1 & power-unit nut M. 8 x 1.

R.504

Thermocouple for ´Honeywell´ combination gas control model Q 385A. Used by ´FERROLI´ and ´FER´.

Threaded M. connection 6 x 0.75 c/w M. connection 11 x 1 for Honeywell Model Q 385 A. Connection nut 11/32´ (ASA) Length 900 mm.

R.505

Thermocouple for boilers and water heaters with or without fixing nut (junction end type TARGET).

R.507

Thermocouple for ´VAILLANT´ boilers & water heaters & other marks.

With ´VILL´ junction end and nut M. 8 x 1 - Length ´L´ 400 mm.

R.508

Thermocouple for boilers and water heaters with connectors M 9 x 1. ´SIT A15´ type junction end.

R.509

Thermocouple for boilers and water heaters with fitting M. 7/16´-27NS for junction end and with connector ASA 11/32´. ´HONEYWELL´ type junction end.

R.532

Super universal thermocouple. Length 900 mm.

Suitable not only for ´Honeywell´ pilot burners but also for the majority of other manufacturers (boilers, water heaters, radiators, ovens, etc.): Robertshaw - Sit -White Rogers - Worcester - Control Co. CC/AP - General Control.

R.535

Universal thermocouple. Length 900 mm. Unified head.

C/w necessary fittings to connect thermocouple to pilot flame & following gas valves: Junkers - Sit - Catoba - Honeywell - Control - White Rogers.

R.550

Pack of 10 split nuts for the installation of thermocouples.

Thermocouple length: 280 mm. - Without the thermostat - For the thermostat see Art. R.198

R.551

Pack of 10 fixing nuts for thermocouples, electrodes etc.

R.553

Pack of 5 interceptors for thermocouples. M. F.

Electrical interception connection - Faston M.

R.571

Split-wire thermocouple compatible with ´CHAFFOTEAUX & MAURY´ boilers and water heaters.

R.572

Split-wire thermocouple compatible with ´JUNKERS-BOSCH´ boilers and water heaters.

Length of sensitive element section: 1,200 mm. Length of valve connection section: 1,100 mm.

R.573

Split-wire thermocouple for boilers and water heaters. Unified head. Length mm L1 x L2 = 800 x 830.

With joint fixing coupler M10 x 1M with milled double cone. With coupler at the valve: 11/32´ (ASA) - M9x1 - M10x1. With lugs for connection to the thermostat: 2 faston 6.3 x 0.8. 2 eyelet terminals diam 3.7. Suitable for substitution of multiple devices.

R.582