Antares Piping

E.329

Elastic compensation joints in flanged neoprene PN16 in galvanised steel.

Certified for installation on drinkable water systems. Max temp. 10-105C°.

E.803

Elbow 45° in PVC diam 50 mm.

G.935

Electrical radial presser in metal case with 3 pliers for pipe diam. 16/20/26 + steel case.

Run on electricity. Pliers with TH profile. 230 V.

G.937

Electrical radial pressure battery or electricity powered. In metal case with 3 pliers for pipe diam 16/20/26.

Battery or elecrticity 230v powered :Pliers with TH profile: Complete with battery, battery charger and power cable.

E.797

Exhaust silencer in PVC diam. 50 mm

E.333

Extendible stauinless steel AISI 316 flexible hose with yellow protection sheath complies with UNI 11353 approved for connecting to mains of gas or water. Max pressure 10 bar. Complete with washer reg. EN.

F.745

Flaring instrument for corrugated pipe for templates F.746.03 and F.746.10 for diameters from 3/8´ to 1´.

This device facilitates the forming of flaring without having to fall back on N°3.

M.130

Flexible hose in monolithic plastic that can be extended or compressed according to the form of drain taps of sinks, wash basins and bidets.

Minimum length mm 300 extendible to a maximun of 680 mm.

M.500

Flexible hose in plastic PVC extendible and compressible for the connection of WC seats.

Inlet connection diam 72/100 - outlet conn 90,100,110 Minimum length mm 290 extendible to maximum 590. Structure to avoid deflection with rienforced spiral in PVC.

E.338

Flexible hose kit from 220 mm to 440 mm in stainless steel for connection of gas boilers.

Compoesed of: - N. 1 plastified flex yellow DN20, connect. 3/4´ F sw. x 3/4´M for gas with NBR washer, in accordance with EN549. - N. 2 flex hoses DN20 conn. 3/4´F sw. x 3/4´M for hot water heating with Fasit washer. - N. 2 flex hoses DN12 conn. 1/2´F sw. x 1/2´M for hot sanitary water with Fasit washer.

M.119

Flexible plastic waste pipe, diameter 32 mm.

This is a remarkably practical flexible pipe capable of solving any kind of waste problem involving wash-basins, bidets and waste traps. It can also be used as a replacement for the traditional waste trap. Can be cut to measure, complete with end adaptors. F. swivel nut 1 1/4´ and waste pipe Ø 32 mm.

M.117

Flexible waste pipe in chrome-plated copper.

G.828

Holder with 50 plastic pipe clips for diam 14-17 for automatic insertion on mesh with wire diam 3mm by using appropriate tool ´Tacker´ art G.835.00.

M.160

Inclined chrome-plated brass fitting for underwash-basin connection diameter 10 mm with stainless steel rose.

G.810

Insulation panels for underfloor heating systems ´SISTEMA FLAT´ with flat surface and with anti-steam filmin polyethylene 0.15mm- borders male/female forfitted layout. Quantities as indicated below .

Conductivity 0,0332W/mK Load resistence: 10% deformation: KPA 200

G.147

M. - M. equal or reducing brass nipples, yellow or bright chrome.

G.940

Mahogany coloured hard-board strips which in contact with the floor forms a cover to hide pipes and electrical wires. Allows for inspection.

External dimensions: height 90 mm., depth 40 mm. Can contain pipes up to diameter 22 mm. Resistant to temperature, maximum: 100°C.

B.121

Metallic flexible hose for connection to domestic gas appliances ´EUCOOKERHOSE´. In accordance with the new european regulation EN 14800.

Made up of steel spirals with metallic net sheath and another protective plast sheath DN12. Complete with washers for gas.

U.017

Nickel-plated brass compression fitting F. for multilayer and polyethylene pipe.

- For direct connection of nipples Art. G.147 - G.149, elbow fittings Art. G.155 - G.156 and tee fittings Art. G.158 and G.159. - For direct connection to male outlets of the following manifolds: G.015 - G.016 - G.019 - G.020 - G.022 - G.024 - G.026 - G.030 - G.033. Pag. 12 - 17 - For direct connection of valves with M. fittings Art. V.030 - V.031 - V.032 - V.033 - Art. V.070 - V.071 - V.072 - V.073 - V.051 - V.052 and ball valve Art. M.00. Pag. 73.

U.007