The safety hose can be connected only when there is no flow. ON/OFF position is indicated by a control light. Connection 1/2´ M. DIN 2999. DVGW tested and approved.

Made up of steel spirals with metallic net sheath and another protective plast sheath DN12. Complete with washers for gas.

Safety tube for all types of gas. Internal and external in steel with connecting cap DIN 3383 for connection to all types of safety valves or taps. Connection 1/2´ F.

(Class VL 94 VO). For the insertion of natural gas and LPG pipes in compliance with the provisions of the UNI CIG 7129 and 7131 regulations.

Max. Pressure: 6 bar - Max. Temperature: from - 40° C / + 550° C.

Max working pressure: 15 bar. Max temp. from -40°C to +150°C

Certified for installation on drinkable water systems. Max temp 10-105C° Absorption capacity 22 mm compression 6 mm .Possible displacement 22 mm.

Certified for installation on drinkable water systems. Max temp. 10-105C°.

Max. pressure: 10 bar - Max. temperature: -20°C to +110°C.

Connections: solder socket ends. Absorption Capacity: 25 mm (10 mm traction, 15 mm compression).

Compoesed of: - N. 1 plastified flex yellow DN20, connect. 3/4´ F sw. x 3/4´M for gas with NBR washer, in accordance with EN549. - N. 2 flex hoses DN20 conn. 3/4´F sw. x 3/4´M for hot water heating with Fasit washer. - N. 2 flex hoses DN12 conn. 1/2´F sw. x 1/2´M for hot sanitary water with Fasit washer.

Thickness 0.3 mm. Max temp 550°C max pressure 15 bar.

Thickness 0.3 mm Max temp. 100°C max pressure 0.5 bar.

Max temp: - 40 + 150°C - presure PN 15bar.

Operating temperatures -60°C/+150°C (180°C Peak)

With the half ring and the fittings with male thread with flat seat allows you to form a joint.

Thickness washers 1.8 mmm. Note: when buying bear in mind the use, european legislation foresees the obligation to use gas washers in NBR EN682.

Tube Cutter with Cutting Wheel – Cutting Capacity 3–35 mm

Width 25mm Thickness 0,5mm Length 5mt.

Width : 19 mm Thicknes 0,18 mm Length 20 mt

Suitable for the insulation of hot and cold pipes, in particula for the cooling production and distribution systems and for special parts that cannot be insulated with tubular pipe insulators. Thickness 3mm.

This device facilitates the forming of flaring without having to fall back on N°3.

Complete with: ABS case - Pipe cutter Art. F.620.28 - Flaring unit Art. F. 745.10, templates for flaring machine Art. F. 746.12 and F. 746.15 and F.746.20 - n ° 20 1/2 ´nuts, n ° 20 open rings Ø 12 with n ° 10 Fasit seals and n ° 10 NBR seals, n ° 20 3/4 ´nuts - n ° 20 open rings Ø 15, with n ° 10 Fasit seals and n ° 10 NBR seals , n ° 12 1 ´nuts, n ° 12 open rings Ø 20 with n ° 6 gaskets in Fasit and n. ° 6 gaskets in NBR.