Antares THERMOSTATIC VALVES

ANTARES anti-freeze brass valve with opening temperature: 3 °C and closing temperature: 4.5 °C

Connections M.xM. - PN 10

Automatic thermostatic valve diverting the flow of hot domestic water in the solar tank to the boiler when the temperature is below 45° C.

Fixed set to 45°C. Temperature 100°C.

C.069

Control kit for solar systems, complete of one diverter valve (Art. C.067 ) and one mixer valve (Art. C.065 ). Temperature control 30-65° C.

Designed for solar thermal heating to divert fluid path according to the instant temperature and supply an adeguate adjustment of use. Connections with fittings 3 pieces M. on valves and output M. Pre set to 45°C.

E.147

4-way brass thermostatic mixing valve, adjustable 25°-55°C with pump connection 1 ½”F swivel – Flow rate KV 3,5.

Suitable for temperature control in under-floor radiant systems.

E.180.00

Draught control device. Diameter 3/4´ M.

Draught control device for biomass plant by Antares

E.215

Anti-condensation thermostatic mixing valve for biomasses powered thermal systems with connections suitable for the application of the circulator.

Max pressure: 10 bar - Max temperature: 100°C.

E.607.12

Control unit for lowering temperature consisting of thermostatic mixing valves for temperature regulation. (Art. T.133.10) installed on modular element with parallel flow & return connections 1 1/2´ M. boiler side below and 1 1/2´ F. swivel nut above on system side. Distance between fixing holes: 125´ Height: 124 Complete with a fixed adjustable by-pass for boiler circuit to be used if control group is installed on a wall boiler or boiler with circulator. In this way there is no risk of the circ

Temperature lowering control unit

G.029

Manifold in sanded brass with incorporated opening valves, operated from electromechanical actuators (included) that receiveing power from the room thermostats, determine the automatic opening and closing of the circuit. Outlets 3/4´ M. Outlet interaxis: 50 mm. Actuator´s voltage 230V AC.

G.053

Stainless steel distribution manifold AISI 304 L, diam ¾” with incorporated opening valves, manually operated or with electromechanical actuators (Art V.058) easy installation for outlets ¾”M Euroconus, center to center distance on outlets 50mm.

G.070

Low temp. module for underfloor heating system manifolds. Complete with thermostatic valve (control range 20° ÷ 50°C) adjustable circulation pump with 6mt delivery head, safety thermostat with manual reset for the turning off of the circulator if there is a fault, a thermometer, drain cock, automatic deaerator and premounted fittings.

G.074.10

Low temperature module applicable to manifolds for underfloor systems with fixed point temperature control complete 20° - 50°C, with 3 way adjustable thermostatic mixing valve, adjustable high efficiency circulating pump 6mt delivery AlfaMax”RS 25/60, reset safety thermostat for stopping the pump in case of abnormalities, integrated check valve, 2 ball valves with 1 thermometer on boiler side and 2 thermometers on manifold side, 1 drain cock, 1 automatic deareator, and necessary pre-assembled f

Low temperature module with fixed point 20 ° ÷ 50 ° C

G.075

- Low temperature module applicable to manifolds for underfloor systems prepared for the control of modulating temperature with the application of a servomotor and the electronic control device (Art T.109.00 + T.101) with 3 way mixing valve, adjustable high efficiency circulating pump 6mt delivery AlfaMax”RS 25/60, reset safety thermostat for stopping the pump in case of abnormalities, integrated check valve, 2 ball valves with 1 thermometer on boiler side and 2 thermomet

To view prices, log in

THERMOSTATIC VALVES

CONTACTS

Italia

ANTARES for Water & Fire Srl

WHO ARE WE