Antares Relaunch modules

Module bestaande uit 2 kogelkranen met verb. (Art. E.430.10), een mengventiel (Art. E.614.12) met parallel aanvoer- en retourkoppeling 1 1/2´ M. aan de boilerkant, circulatiepomp (Art. P.064), 2 kogelkranen (Art. E.608.10) met 2 thermometers, 1 controleventiel. Uitgangverloopstuk 1´ V. Ingang verb. 1´ M. Tussenafstand uitgangen 125 mm.

Dit model kan eveneens gecombineerd worden met een apparaat dat overdruk voorkomt (Art. E.615.10).

E.634

Suction valve for “Multiflex” tank with pull lever and foot valve. In brass with 1 ”M connection

Aanzuig- en retourkoppelingen: diameter 8, 10, 13 of 3/8´. Lengte aanzuigslang: 2.200 mm. Met diameter 6 koppeling, klaar voor aanhechting van niveaumeter A.040.00.

E.640

Pre-assembled module for the supply of hot sanitary water including; brazed plate heat exchanger, 2 ball valves (e.430.10) 1 spacer tube, pumps energy class ´A´ (p.064.6) auto- regulating, 2 ball valves with therm. And check valve (e.478) 2 therm. On sanitary circuit and thermo.isolating shell in polystyrene.

Available with or without 3 way thermostatic mixing valve, for controlling temperature of hot sanitary water. Conn: heating system 1´M - distance 125 - max pressure 10 bar.

E.651

Composed of; 1- Rigid thermal isolation in EPP - 2- Flowmeter with manual adjustment of flow - 3- Load and drain taps - 4 - Assembly shut off/check valve - 5- Return with blue handle and incorporated thermometer ( 0-160°C) 6 - Pre-set safety valve for solar systems at 6bar -7- Manometer (0-10bar) 8- Expansion vessle connection - 9 Device for excluding check valve - 10 - Circulating pump AlfaMax RS 15/60 high energy efficiency - 11- Fixing bracket - 12 Forward flow with red handle and incorporate

Connections 3/4´F x 3/4´F - For connection with copper pipe see specific union joints on page.....

E.654

Composed of; 1- Rigid thermal isolation in EPP - 2- Flowmeter with manual adjustment of flow - 3- Load and drain taps - 4 - Assembly shut off/check valve - 5- Return with blue handle and incorporated thermometer ( 0-160°C) 6 - Pre-set safety valve for solar systems at 6bar -7- Manometer (0-10bar) 8- Expansion vessle connection - 9 Device for excluding check valve - 10 - Circulating pump AlfaMax RS 15/60 high energy efficiency - 11- Fixing bracket - 12 - Hose connection

Connections 3/4´F x 3/4´F - For connection with copper pipe see specific union joints on page.....

E.660

Vertical manual deareator for insertion in return flow pipes in solar systems . Conn: 1´M x 3/4´M

E.662

– Flow regulating valve DN15 with glass reading zone, two connections: filling and discharge with ball valve – Connections1”F swivel x ¾”F

Temp. max 140°C Max pressure 10 bar.

E.670

Decoupled circuit separator ´SEPACIR´ with covering sheath. Connections 3/4´ for heating and 1/2´ for feeding circuit.

Composed of the following components - Steel plate heat exchanger XXKWAT - Circulator 6mt in energy class ´A´Expansion vessle inserted or external equipment; - 3 bar safety valveCapillary manometer; -circuit feeding tap; - 4 intercepting ball valves; Dirt separator optional as accessory; automatic deareator; 4 steel flex 3/4´ extendible for connection.

E.690

Stainless steel hydraulic compensator AISI 304 L complete with thermal isolating shell, automatic deareator with check valve and mud draining tap.

Recommended max flow capacity : 3mc/h Max pressure 10 bar : Max temp: 110°C

E.691

Stainless steel hydraulic compensator AISI 304 L flat seat complete with thermal isolating shell, automatic deareator with check valve and mud draining tap.

Recommended max flow capacity : 6mc/h Max pressure 10 bar : Max temp: 110°C

E.692

Suction valve for “Multiflex” tank with pull lever and foot valve. In brass with 1 ”M connection

Aanzuig- en retourkoppelingen: diameter 8, 10, 13 of 3/8´. Lengte aanzuigslang: 2.200 mm. Met diameter 6 koppeling, klaar voor aanhechting van niveaumeter A.040.00.

E.693

Suction valve for “Multiflex” tank with pull lever and foot valve. In brass with 1 ”M connection

Aanzuig- en retourkoppelingen: diameter 8, 10, 13 of 3/8´. Lengte aanzuigslang: 2.200 mm. Met diameter 6 koppeling, klaar voor aanhechting van niveaumeter A.040.00.

Om prijzen te bekijken log in

Relaunch modules

CONTACTEN

Italia

ANTARES for Water & Fire Srl

OVER ONS

Om prijzen te bekijken log in

Relaunch modules

CONTACTEN

Italia

ANTARES for Water & Fire Srl

OVER ONS

Privacy- en cookiebeleid