The thermostat SOLAR CONTROL is an electronic device built after many years of experience in the thermal control field by ANTARES. This device allows you to keep a precise control of the temperature deriving from the solar panels and to distribute the hot water into the tank. Through the sensors it will detect the temperature of the water supplied to the tank and it will compare it with the fluids in the solar panel. When the temperature of the panels is higher than the one from the tank, the differential thermostat starts the pump which allows the exchange of heat between panel and tank. To ensure a perfect exchange of temperature the device has a temperature differential “delta T” variable from 1 to 9 °C which is controlled by the handle on the front part of the thermostat. Temperature control : 30-80 °C. Adjustable range : 1-9°C Relay Outlet 10A 230V. Installation DIN bar (3 modules). Dimensions 53x90x58. Probes connected up to 100 mts. Complete with 2 switch-offs: pump for solar panels and pump for circuit integration.
Main connections diam : 11/2´M with flat seat axis of 125 mm. Connections on deviations diam: 11/2´F swivel or 1´F swivel.
Max flow rate: m3 / h 3.3. Self-regulating. It satisfies all the needs of the circulator in a single product. Complete with gaskets and power cables. 230 Vac power supply. - 4 year warranty.
Complete of circulating pump energy class A ´Modulex Hybrid´ with 6mt delivery, anticondensation by-pass, interception valve, thermometer and check valve, wall fixing brackets. Complete of isolating shell.. Model DN 25 for power upto 32 KW: Connection 1´ - Flow KV: 3,2.
Max temperature: 110° C - 230 Vac - 50 Hz - Compatible function with antifreeze max: at 50% Delivery max: 6 mt - Flow max.: 60lt/min. Connections 1´. - hight 130 - A=98 - B=165 Function: automatic in relation to the delivery requested in order to optimize electical use- constant pressure - proportional pressure
Max temp: - 40 + 150°C - presure PN 15bar.
Connections 3/4´F x 3/4´F - For connection with copper pipe see specific union joints on page.....
Connections 3/4´F x 3/4´F - For connection with copper pipe see specific union joints on page.....
Max temp. 40 + 150°C pressure PN 15 bar.
When the temperature of the panels is higher than that of the water in the boiler, the control unit starts the pump that allows the exchange of heat between the panel and the boiler. To ensure perfect temperature exchange, the appliance is equipped with a ´Delta T´ temperature differential variable from 3 ° to 15 ° C which can be adjusted with the buttons on the front of the control unit. It allows the integration of both sanitary water and the traditional heating system. Configuration of the four different solar systems: 1st boiler panel system. 2nd boiler panel system + storage boiler with automatic temperature control. 3rd Heating system integration system with automatic control. 4th Integration system to the swimming pool system with automatic control. Domestic hot water priority. Power supply 230V - Temperature reading range: -20 ° C - 120 ° C. Fixing: on electrical panel on DIN omega bar - 9 modules.
* For power up to 50 KW: predispoded for insertion of by-pass valve for eventual over pump pressure (Art. P.301.03).