Antares Relaunch modules

Veiligheids- & controlegroep voor verwarmingsinstallaties met gesloten circuit. Gemaakt uit verzinkt stalen lichaam met 1´ V. koppeling met vlotterontluchter (E.000.03), manometer, automatische afsluiter (E.005.03) en 3 bar-veiligheidsventiel.

E.147

4 way thermostatic mixing valve, threaded and adjustable.

Control range. 30-60°C Indicated for temp. reduction of underfloor heating systems. Control adjustable with knob.

E.149

Thermostatic mixing valve for underfloor heating systems.

Körper aus gesandetem und verchromten Messing. Regelbereich: 20° - 50°C. Regelskala 1-5. Sehr klein, daher kann man den Mischer direkt vor den Verteilersammelleitungen einbauen, um die Temperatur der Fußbodenheizung zu senken.

E.150

Thermostatischer Mischer ´L´ in Messing für Fußbodenheizung und um die konstante Temperatur zu regulieren: 20°C-45°C

Für Anwendungen bei denen die Zugangs-/ Ausgangsrohre parallel sind.

E.220

Preassembled anticondensation circulation group for heat generators on solid fuel feed composed of dinamic anticondensation by-pass, adjustable circulation pump ´Modulex Hybrid´ high efficiency 6mt delivery, 3 interception valves with thermometer and check incorporated.

Model DN 25 for power upto 32 KW Connections: 1´ - Flow KV: 3,2

E.342

Coil of flexible tube ´INOFLEX CSST´ for solar systems. In stainless steel AISI 304 corrugated parallel spires thickness 0,3mm in defined length with isolating expanding sheath EPDM 13mm and coated with protective film against UV rays and from ware and tare with or without multiphase cable for temp. probes.

Max temp: - 40 + 150°C - presure PN 15bar.

E.345

Double coil (to and from) of flexible tube ´INOFLEX CSST´ for solar systems in stainless steel AISI 304 corrugated parallel spires thickness 0.3 mm in defined lenght with isolating expanding sheath EPDM 8 mm and coated with protective film iron UV rays and from ware and tare with multifase cable (for temp. probes).

Max temp. 40 + 150°C pressure PN 15 bar.

E.347

Cross fitting with probe holder and manual vent valve for solar panels.

SQ connections 3/4 ´M x diam. 22 mm

E.428

Kogelkraan, volle doorlaat, met M. koppeling, temperatuurmeethuls en vleugelgreep. Vernikkelde messing.

V. Koppeling + M. temperatuurmeethuls - Max. druk 30 bar.

E.438

Module mounted ball valve with pump connection and red pocket handle for thermometer + thermometer . Thermometer scale 0°C-160° C. Check valve and fixing holes.

Pressure max: 10 bari - Temp max : 140°C -Conn. 3/4´ F. x 1´ F. swivel.

E.439

Module mounted ball valve with pump connection side connection 3/4´ F with blue coloured handle pocket thermometer + thermometer. Thermometer scale 0°C-160° C. Check valve, disconnection and passage holes.

Pressure max 10 bar temp- max 140° C conn. 3/4´ F x 1´ F swivel.

E.600

Dubbele modulaire gelijkvlakkige verdeelleiding in Inox DN 40 roestvrijstaal met 2´ M. en V. wartelmoerverloopstukken.

Tussenafstand inlaten & uitlaten 125 mm.

E.609

Special ´T´ joint for condensation alignments for the in/out flow of the mixing valves (T.133.50 E.215. E.143.12).

Terminal poles distance 90mm Connections 11/2´F x 11/2´M x 1´F

E.610

Pair of brass adapters for mounting DN25 1´1/2 M. Pump Groups on manifolds with different outlets.

E.612

Paar 2´ V. afsluitdoppen voor verdeelleidingen Art. E.600 (n. 2 G.150.20).

E.613

Suction valve for “Multiflex” tank with pull lever and foot valve. In brass with 1 ”M connection

Aanzuig- en retourkoppelingen: diameter 8, 10, 13 of 3/8´. Lengte aanzuigslang: 2.200 mm. Met diameter 6 koppeling, klaar voor aanhechting van niveaumeter A.040.00.

E.619

Paar beugels voor bevestiging van verdeelleiding Art. E.600. aan de muur.

Gemaakt uit 2 kragen, zware uitvoering, aanpaspare veer, douwels en vastzettende vijzen.

E.621

Invertable relaunch assembly DN25, composed of 2 ball valves with thermometer and one way valve, high efficency adjustable circulation pump ´Modulex Hybrid´ 6mt delivery, alignment spacer and ball valve with screw-driver adjustment for eventual substitution of pump and isolation shell.

* For power up to 50 KW: predispoded for insertion of by-pass valve for eventual over pump pressure (Art. P.301.03).

E.623

Module DN25 for lowering and regulating thermostatic temperature at fixed point of : 30° - 60°C for systems with radiant panelscomposed of 2 ball valves with thermometer and one way valve, high efficiency adjustable circulating pump ´Modulex Hybrid´ 6mt delivery, 3 way thermostatic valve, alignment spacer, and ball valve screw-driver adjustable for eventual substitution of pump, safety thermostat manual reset for stopping pump in case of abnormalities and isolating shell.

* predisposed for insertion of by-pass valve for eventual over pump pressure (Art P.301.03).

E.624

Module DN25 for lowering and regulating modulating temperature with separate electronic apparatus (see art. T101). Suitable for systems with high and low temperature (radiators and panels) composed of 2 ball valves with thermometer and one way valve, high efficiency adjustable circulating pump ´Modulex Hybrid´ 6mt delivery, 3 way motorized mixing valve with by-pass, alignment spacer, and ball valve screw-drive adjustable for eventual substitution of pump, safety thermostat manual rest for stoppi

Predisposed for insertion of by-pass valve for eventual over pump pressure for power up to 38 KW (Art P.301.03) ** For servomotor characteristics see art. T.109.

E.627

Anticondensation preassembled module for heat generators on solid fuel feed, with thermostatic assembly

Complete of circulating pump energy class A ´Modulex Hybrid´ with 6mt delivery, anticondensation by-pass, interception valve, thermometer and check valve, wall fixing brackets. Complete of isolating shell.. Model DN 25 for power upto 32 KW: Connection 1´ - Flow KV: 3,2.

E.628

Anticondensation module for heat generators on solid fuel feed with motorized mixing valve, high efficiency adjustable circulating pump ´Modulex Hybrid´ 6mt delivery, 2 ball valves with thermometer, check valve, alignment spacer and isolating shell

E.629

Thermal exchange module for hydraulic circuits

Prepared for direct connection with anticondensation biomass heat generators (Art E.627 on page..) and also for the control units for the lowering or mixing of temperature for radiant systems. (Art E.623 and E.625 on page..) It is composed of steel plate heat exchanger in the power listed, neccessary preassembled connection fittings and isolating shell. prepared for the connection of various accessories in corrispondence with the four ´T´ fittings - Distance between holes: 125mm.

E.630

Invertable relaunch module DN 32 composed of 2 ball valves with thermometer and integrated one way valve, high efficiency adjustable circulating pump ´Modulex Hybrid´ with 6mt delivery, ball valve for eventual substitution of pump and isolating shell. Suitable for power upto 125 KW - Connections: 11/4´M and 11/2´ with largening rings included.

E.631

Module bestaande uit 2 kogelkranen met verb. (Art. E.430.10), een mengventiel (Art. E.614.12) met parallel aanvoer- en retourkoppeling 1 1/2´ M. aan de boilerkant, circulatiepomp (Art. P.064), 2 kogelkranen (Art. E.608.10) met 2 thermometers, 1 controleventiel. Uitgangverloopstuk 1´ V. Ingang verb. 1´ M. Tussenafstand uitgangen 125 mm.

Dit model kan eveneens gecombineerd worden met een apparaat dat overdruk voorkomt (Art. E.615.10).

E.634

Suction valve for “Multiflex” tank with pull lever and foot valve. In brass with 1 ”M connection

Aanzuig- en retourkoppelingen: diameter 8, 10, 13 of 3/8´. Lengte aanzuigslang: 2.200 mm. Met diameter 6 koppeling, klaar voor aanhechting van niveaumeter A.040.00.

E.640

Pre-assembled module for the supply of hot sanitary water including; brazed plate heat exchanger, 2 ball valves (e.430.10) 1 spacer tube, pumps energy class ´A´ (p.064.6) auto- regulating, 2 ball valves with therm. And check valve (e.478) 2 therm. On sanitary circuit and thermo.isolating shell in polystyrene.

Available with or without 3 way thermostatic mixing valve, for controlling temperature of hot sanitary water. Conn: heating system 1´M - distance 125 - max pressure 10 bar.

E.651

Composed of; 1- Rigid thermal isolation in EPP - 2- Flowmeter with manual adjustment of flow - 3- Load and drain taps - 4 - Assembly shut off/check valve - 5- Return with blue handle and incorporated thermometer ( 0-160°C) 6 - Pre-set safety valve for solar systems at 6bar -7- Manometer (0-10bar) 8- Expansion vessle connection - 9 Device for excluding check valve - 10 - Circulating pump AlfaMax RS 15/60 high energy efficiency - 11- Fixing bracket - 12 Forward flow with red handle and incorporate

Connections 3/4´F x 3/4´F - For connection with copper pipe see specific union joints on page.....

E.654

Composed of; 1- Rigid thermal isolation in EPP - 2- Flowmeter with manual adjustment of flow - 3- Load and drain taps - 4 - Assembly shut off/check valve - 5- Return with blue handle and incorporated thermometer ( 0-160°C) 6 - Pre-set safety valve for solar systems at 6bar -7- Manometer (0-10bar) 8- Expansion vessle connection - 9 Device for excluding check valve - 10 - Circulating pump AlfaMax RS 15/60 high energy efficiency - 11- Fixing bracket - 12 - Hose connection

Connections 3/4´F x 3/4´F - For connection with copper pipe see specific union joints on page.....

E.660

Vertical manual deareator for insertion in return flow pipes in solar systems . Conn: 1´M x 3/4´M

E.662

– Flow regulating valve DN15 with glass reading zone, two connections: filling and discharge with ball valve – Connections1”F swivel x ¾”F

Temp. max 140°C Max pressure 10 bar.

E.670

Decoupled circuit separator ´SEPACIR´ with covering sheath. Connections 3/4´ for heating and 1/2´ for feeding circuit.

Composed of the following components - Steel plate heat exchanger XXKWAT - Circulator 6mt in energy class ´A´Expansion vessle inserted or external equipment; - 3 bar safety valveCapillary manometer; -circuit feeding tap; - 4 intercepting ball valves; Dirt separator optional as accessory; automatic deareator; 4 steel flex 3/4´ extendible for connection.

E.690

Stainless steel hydraulic compensator AISI 304 L complete with thermal isolating shell, automatic deareator with check valve and mud draining tap.

Recommended max flow capacity : 3mc/h Max pressure 10 bar : Max temp: 110°C

E.691

Stainless steel hydraulic compensator AISI 304 L flat seat complete with thermal isolating shell, automatic deareator with check valve and mud draining tap.

Recommended max flow capacity : 6mc/h Max pressure 10 bar : Max temp: 110°C

E.692

Suction valve for “Multiflex” tank with pull lever and foot valve. In brass with 1 ”M connection

Aanzuig- en retourkoppelingen: diameter 8, 10, 13 of 3/8´. Lengte aanzuigslang: 2.200 mm. Met diameter 6 koppeling, klaar voor aanhechting van niveaumeter A.040.00.

E.693

Suction valve for “Multiflex” tank with pull lever and foot valve. In brass with 1 ”M connection

Aanzuig- en retourkoppelingen: diameter 8, 10, 13 of 3/8´. Lengte aanzuigslang: 2.200 mm. Met diameter 6 koppeling, klaar voor aanhechting van niveaumeter A.040.00.

E.700

Adajacent manifold “FLUIDHUB” for thermal installations in varnished steel with axis on deviations of 125mm , suitable for relay groups DN 25 and DN 32. Equipped with connection nut (M8) for fixing brackets. Complete of isolating shell with axis 125mm.

Main connections diam : 11/2´M with flat seat axis of 125 mm. Connections on deviations diam: 11/2´F swivel or 1´F swivel.

E.704

Suction valve for “Multiflex” tank with pull lever and foot valve. In brass with 1 ”M connection

Aanzuig- en retourkoppelingen: diameter 8, 10, 13 of 3/8´. Lengte aanzuigslang: 2.200 mm. Met diameter 6 koppeling, klaar voor aanhechting van niveaumeter A.040.00.

E.705

Suction valve for “Multiflex” tank with pull lever and foot valve. In brass with 1 ”M connection

Aanzuig- en retourkoppelingen: diameter 8, 10, 13 of 3/8´. Lengte aanzuigslang: 2.200 mm. Met diameter 6 koppeling, klaar voor aanhechting van niveaumeter A.040.00.

F.470

Tank of permanent ecological antifreeze liquid with monoethylene glycol base. It is corrosion proof and thanks to its protection properties can protect all metals in the different parts of heating cooling and solar systems. ATTENTION: AS THIS PRODUCT DERIVES FROM PETROL ITS PRICE IS CONNECTED TO THE PRICE CHANGES OF PETROL ACCORDING TO THE INTERNATIONAL MARKET AND WILL BE UPDATED CONTINUOUSLY.

F.747

Displaying device for checking the density of ethylene glycol (anti-freeze) in the watery solution of the system.

Accurate analog meter.

G.083

Connection kit for low temperature manifolds (radiating system) and high temperature manifolds (radiators and towel dryers).

G.093

Thermal isolationg shell thermoformed closed cell for mixing groups

G.098

Electrical wiring box for circulating pump and safety thermostat for mixing groups. (90x90x40)

Complete of three cable glands, connection terminals and warning light indicating the pump locking coming from the safety thermostat having found abnormal exceeding limit of the set temperature.

G.120