When added to cement mix guarantees even covering of pipework. To be diluited before using in the ratio of 1.3 Kg. to 100 Kg. cement.

For hot & cold water distribution systems, underfloor heating & radiator systems. Pressure: 10 bar. Temperature: 95° C.

For hot & cold water distribution systems, underfloor heating & radiator systems. Pressure: 10 bar. Temperature: 95° C.

Height 150mm .Thickness 6mm . Eliminates heat dispersion and absorbs floor dilation. For application on perimeter of walls before laying down screed. Polyethylene sheet to put over the insulator to avoid accedental dripping of cement between floor and wall. According to current norms allows for screed dialation of 5mm (Din 18560).

Suitable for the insulation of hot and cold pipes, in particula for the cooling production and distribution systems and for special parts that cannot be insulated with tubular pipe insulators. Thickness 3mm.

Width 25mm Thickness 0,5mm Length 5mt.

Universal, super handy electric tool with automatic circuit control for producing pipe pressing joints for all common pressfitting systems. For battery and corded operation. Pipe pressing joints Ø 10 -40 mm Ø 3/8´ - 1 1/4´. Rems Mini-press ACC- universal up to Ø 40 mm. Super light, super small, super handy. With automatic circuit control. Secure crimping in seconds. Automatic locking of the pressing tongs.

Connection 1/2´ M. x 10 x 3/4´ M.

For the automatic insertion of pipe fixing clips. Art G.836 and G.828.20.

Thickness 0.3 mm Max temp. 100°C max pressure 0.5 bar.

Thickness 0.3 mm. Max temp 550°C max pressure 15 bar.

For central & underfloor heating systems, hot & cold water distribution systems. Pressure: 6 bar. Temp.: 95° C. (10 bar and 70 ° C.). D

Max temp: - 40 + 150°C - presure PN 15bar.

For the distribution of hot and cold water, radiator heating sytems and underfloor heating. Pressure 10bar temp. 95°C.

For the distribution of hot and cold water, radiator heating systems and underfloor heating. Pressure 10 bar temp. 95°C.

For the distribution of hot and cold water, radiator heating systems and underfloor heating. Pressure 10 bar temp. 95°C.

For hot and cold water distribution systems, radiator systems & underfloor heating. Pressure: 10 bar. Temperature: 95°C. SKZ certificate No. A-270.

For the distribution of hor and cold water, radiator heating systems and underfloor heating. Pressure 10bar. Temperature: 95°C.

Operating temperatures -60°C/+150°C (180°C Peak)

Maximum operating temperature: 200 °C. Pressure PN 15 bar.

Max temp 10-105C° Absorption capacity: compression 22 mm, extension 6 mm. Possible displacement 22 mm.

Max temp. 10-105C°.

Run on electricity. Pliers with TH profile. 230 V.

Battery or elecrticity 230v powered :Pliers with TH profile: Complete with battery, battery charger and power cable.

This device facilitates the forming of flaring without having to fall back on N°3.

Minimum length mm 300 extendible to a maximun of 680 mm.

Inlet connection diam 72/100 - outlet conn 90,100,110 Minimum length mm 290 extendible to maximum 590. Structure to avoid deflection with rienforced spiral in PVC.

Compoesed of: - N. 1 plastified flex yellow DN20, connect. 3/4´ F sw. x 3/4´M for gas with NBR washer, in accordance with EN549. - N. 2 flex hoses DN20 conn. 3/4´F sw. x 3/4´M for hot water heating with Fasit washer. - N. 2 flex hoses DN12 conn. 1/2´F sw. x 1/2´M for hot sanitary water with Fasit washer.

This is a remarkably practical flexible pipe capable of solving any kind of waste problem involving wash-basins, bidets and waste traps. It can also be used as a replacement for the traditional waste trap. Can be cut to measure, complete with end adaptors. F. swivel nut 1 1/4´ and waste pipe Ø 32 mm.

Conductivity 0,0332W/mK Load resistence: 10% deformation: KPA 200

External dimensions: height 90 mm., depth 40 mm. Can contain pipes up to diameter 22 mm. Resistant to temperature, maximum: 100°C.

Made up of steel spirals with metallic net sheath and another protective plast sheath DN12. Complete with washers for gas.

Gasket thickness: 1.8 mm. Note: When purchasing, consider the specificity of use: European regulations require that gaskets made of NBR are used for gas, in accordance with EN 682.

Dosing: 600 gr. for cubic meter of cement.

Ensure the lifting of 30mm of the mesh from the bottom and distance between the two wire meshes (60mm) and the pipes.

External diameter 76 mm .

Suitable for automatic fixing of pipes up to diam 20mm onto insulation panels with special tool ´Tacker´ art G.835.00 and also for fixing of pipe guide art G.822.