Antares Pipes

5 m coil of soft copper pipe, diameter 6 mm for connecting gas oil pump, solenoid valve & nozzle and for gas feeding to pilot burners.

W.150

Pack of 5 fittings with male connection and brass compression olive for the connection of capillary tubes (from the fuel pump to the solenoid or to the nozzle, for the connection of gas to the pilot burners and other).

W.153

Pack of 5 fittings with compression ends and M. threaded ends, made of nipples, F. nut and brass compression olive for the connection of capillary tubes.

G.700

Coil of cross-linked polyethylene pipe without protective sleeve - Oxygen barrier sealed - Model PEX. Neutral colour.

For central & underfloor heating systems, hot & cold water distribution systems. Pressure: 6 bar. Temp.: 95° C. (10 bar and 70 ° C.). D

G.704

100 m. coil of cross-linked polyethylene pipe - Model PEX. Colour: Neutral.

For hot & cold water distribution systems, underfloor heating & radiator systems. Pressure: 10 bar. Temperature: 95° C.

G.705

50 m. coil of cross-linked polyethylene pipe - Model PEX - with removable protective sleeve.

For hot & cold water distribution systems, underfloor heating & radiator systems. Pressure: 10 bar. Temperature: 95° C.

G.900

Coil of PEX-AL multilayer pipe.

For hot and cold water distribution systems, radiator systems & underfloor heating. Pressure: 10 bar. Temperature: 95°C. SKZ certificate No. A-270.

G.902

Coil of PEX_AL multilayer pipe with inflammable blue closed cell protective cover.

For the distribution of hor and cold water, radiator heating systems and underfloor heating. Pressure 10bar. Temperature: 95°C.

G.903

Coil of PEX - AL multilayer pipe with self-extinguishing red closed cell protective cover-

For the distribution of hot and cold water, radiator heating sytems and underfloor heating. Pressure 10bar temp. 95°C.

G.904

Coil of pex-al multilayer pipe with corrugated blue protective cover.

For the distribution of hot and cold water, radiator heating systems and underfloor heating. Pressure 10 bar temp. 95°C.

G.905

Coil of PEX - AL multilayer pipe with corrugated red protective cover.

For the distribution of hot and cold water, radiator heating systems and underfloor heating. Pressure 10 bar temp. 95°C.

G.917

Straight brass fitting with F swivel nut and press fitting end for multilayer and polythene pipe.

Suitable for connections to manifolds; G.015-G.016-G.019-G.020-G.021-G.022-G.023-G.024-G.025-G.026-G.030-G.031-G.033.

E.348

Pack of open rings (2) with washers (3) for fastening fitting joints assemblies with corrugated pipe CSST.

Thickness washers 1.8 mmm. Note: when buying bear in mind the use, european legislation foresees the obligation to use gas washers in NBR EN682.

E.350

Open ring nut set with sealing gasket for the formation of connection fittings with CSST corrugated hose.

Gasket thickness: 1.8 mm. Note: When purchasing, consider the specificity of use: European regulations require that gaskets made of NBR are used for gas, in accordance with EN 682.

E.360

Quick brass fitting with male thread for corrugated inox pipe.

Composed of joint, nut, cut washer and N°2 specified O-ring.

E.363

Quick brass fitting with female thread for corrugated steel hose.

Composed of joint, nut, cut washer and N°2 specified O-ring.

E.365

Quick brass fitting with connection for corrugated steel hose and copper hose.

Composed of joint, nut, cut washer and N°2 specified O-ring, ogive for copper pipe.

G.147

M. - M. equal or reducing brass nipples, yellow or bright chrome.

G.940

Mahogany coloured hard-board strips which in contact with the floor forms a cover to hide pipes and electrical wires. Allows for inspection.

External dimensions: height 90 mm., depth 40 mm. Can contain pipes up to diameter 22 mm. Resistant to temperature, maximum: 100°C.

G.800

Quantities as indicated below of insulation heating panels for underfloor heating systems ´CLASSIC FLOOR´ in polystyrene with anti-steam film in polyethylene 0.15mm and depth of trail for pipe 16/17 Borders male /female for fitted layout.

Conductivity 0,0332W/mK Load resistence: 10% deformatio: KPA 200

G.802

50MT reel of skirting insulation adhesive tape in expanded closed cell polyethene.

Height 150mm .Thickness 6mm . Eliminates heat dispersion and absorbs floor dilation. For application on perimeter of walls before laying down screed. Polyethylene sheet to put over the insulator to avoid accedental dripping of cement between floor and wall. According to current norms allows for screed dialation of 5mm (Din 18560).

G.804